That first bird is a chickadee. I grew up in Alaska and they were everywhere. My Grammy collects art of them and I am now going to start my own quest to find and make one of these to send her.
I was thinking Chickadee too, but the belly is almost too red. It seems like a cross between a chickadee and a Robin. Still both very common birds haha
Even with the first series, I found it essential to use water resin from the fish to keep the stones in place on the plants, it's maddening to bump one and all the stones go flying! I'm going to use resin to hold the seeds around the edge and to seal the top as you did. Thanks for sharing!
That's so disappointing that it doesn't hold together at all on it's own. It really should come with a little resin to hold things in place. The seed, the bird, the lid, the plant under the soil/rock. All those things need to be stuck on. Tsk on them! Personally, with the bird feeder/house, I would've tied the knot on the underside of the lid to make it easier to hang and resined the cardinal sitting outside the house on the ledge so it could be seen better. Next series, I'd like to see a tiny squirrel on one of those little squirrel feeder chairs that hold a dent corn cob or a bunny in a hutch with a little bowl of greens, or a chicken with a chick and egg in a roost.
Tbf, it’s probably for the best to not give kids resin. And I suppose it gives replay value to making it again. But I do with there was a way to keep em together 🥲
good luck they don't care, they're cheap and never want to replace broken things even when you do an unboxing they still want to find cheap ways to use something from your house, so they don't have to mail their mistake. mini company are lame and cheap af
Good to know my favorite miniature creator is also a lefty 🤝 For ideas with duplicates: these are more of a grander scale, but for the birds find a tree that fits the scale and create a diorama of all the birds on the branches, interacting with the miniverse crafts, eating birdseed off the ground etc. And for the plants I have created a little greenhouse to display them all. Not helpful for individual crafts but I hope it's somewhat helpful LOL. Or if you really wanted... add some birds on top of the bird feeder.. with some bird poop.. because we all know there would be some. Thanks for the awesome vid!
For the cardinal; it would look better if you use resin to glue a toothpick or matchstick to the edge of the round hole to make a perch then glue the cardinal to the perch so it's more visible. You also might want to glue the eggs in place so they stay put. And I would also run a ring of resin around the bird feeder before filling the outer ring with seed. Then if it gets tipped the seed won't spill. For both of the ones with the rope, I would tie the knot INSIDE so all that shows is the loop. I DO like that you glued the lid on the feeder.
Hello! You don’t need resin or glue for the chickadee bird feeder. The top pops on like the bottom! It’s a tight fit, but holds very well. Love your videos!
Came here for this comment! I made the same one not long ago and the top popped on and fit like a glove! Not sure why he didn’t try a bit harder to get it to snap on
So glad I found your channel! It’s so fun and relaxing watching your videos ❤ For all the Lifestyle Home Series, I ended up using resin to hold all the plants in and rocks down. I used mold making putty and made a mold of the cardinal so that I could make a female cardinal. After some trial and error and a paint job, she turned out great! 🐦 I look forward to your videos every week!
@@private15 I think they might have actually meant the tie on the base of the stem/top of the bag that would tie around the bottom of the bamboo and be hidden by the rocks. That would have helped but he did use the little clip at the top of that is what they actually meant lol.
That's exactly what I've done with my plants I've gotten, cause I'm always knocking things over in the dollhouse, so I had to. Especially the ones with rocks. I don't want tiny rocks spilling over all time.
I'm 42 so at the age where I don't get all this mini fascination. But watching this I feel I'm missing out and need to buy some! They are really detailed
I had to use Glue to get the top of the bird feeder to stay because they either made an error or changed it mid-production. I also coated the seeds in the tray with glue so they don't go flying everywhere. Glue-All worked just fine but takes longer for it to dry
I love this! You know, you can get great house plants at Trader Joe’s, in case you’re close to one. The one near me, has them for about $12.99 to $14.99, for low maintenance house plants most of the time! It’s been very fun to me to learn about them, and try to encourage them to grow. I have a feeling you would like it as well. I always name everything, so I like picking out their names too, lol! Have a great Saturday!! ❤
Hi 👋 it's good to see you 😊 and I hope you are doing well 😊 and that everything is going well for you 😊 and that you're having a happy weekend and a happy Saturday 😊 . Also please remember to take care of yourself 🙏. Also I hope you enjoy the mini brand figures 😊 you got today 😊 or that you unboxed today they are really interesting 🤔 looking. Also you are amazing 🤩 so keep being you cuz you're awesome 👍😎🙏.
With the size of the box the bird comes home in they could have given both a male and female. The set would look cuter, at least for me, if the bird didn't look so lonely. Even if the birds 🐦 are seen more often alone. But just a thought.❤
@frienjie7148 I have been like eeeeeeeeekkk if the box opened and it was mumma dad and eggs or even a tiny group of chick's. Or for the feeder a few adult birds so it was more like a proper garden feeder with birds all over just snaking and hanging out. Be kinda funny if there was a feeder with a squirrel sneaking bird food 🤣.
Hey, lefties are cool 😎 I use my right hand for scissors, can openers, most of the stronger things The delicate things, like writing, with my left I can also change hand, whilst painting, or varnishing, when one hand gets tired We are practically ambidextrous 🙌🏼😉❤
On the cardinal I would resin it to the roof overlooking its nest .. build up the nest in a way to see the eggs .. maybe a little resin on the eggs to hold together.. maybe
Just a heads up. There are cheat codes on mini verse make it now. Small pinholes That let you know what's inside the ball. Also mini brand just came out with it's own line of make it's... Master chef...and BTW. The tiny bird is a chickadee. Hope you have a great day.
@@somegurloverthere no one is tampering with the balls. The factory puts in the pinholes. And some people don't want to spend their whole paycheck just trying to get the humming bird feeder for their kid. Some people are sick of doubles. Pick blindly if you need the surprise. I'm going to use the codes. That's how I got the pickles first try
@@barmhjertige1 the pinholes are in different positions on the ball.. so you need the cheat sheet that's posted on Tic Tok and reddit. It shows you exactly where the factory put the hole. It's pretty accurate .. I went back and found the Popsicle mold. The holes are very tiny. I couldn't see them without reading glasses. Hope that helps. There are videos on RUclips that shows you where they are.
GD! Suggestion for house plant: get a zamioculca plant! They grow luscious and beautiful without much care. Great plant for beginners in plant parenting :)
Always Amazing. To do different: with your cardinal you ended up with more nest material at the end take some of that and place it underneath the back of the house and place the eggs on an angle. Almost as if they’re on a riser. I’m going to do my video today trying the method and I will post on my instagram and my channel hopefully by tomorrow. Thanks for the inspiration. STILL THINKING ABOUT YOUR MEAL VIDEO. Thanks GOLDEN!
Oh! I just bought my 1st mini verse balls tonight! Target had a selection, I bought 6 series 2, no duplicates and I got the teapots and cups I wanted, a vase, and some candles and plants, the mold kits, love them. 😂
When I made this one cardinal birdhouse I put the knot on the inside of the house .. can seal it with resin and hide the knot.. I put the bird on the outside and used resin to set the nest and eggs
Definitely a chickadee. I'm definitely going to use resin to make my soils and rocks and birdseed stick, so if my display gets jostled, it's not a catastrophe lol. I have cats, and a 15yo kid, it's going to get touched. I actually have 2 nice antique wood newspaper drawers that held numbers and letters, so I'm going to hang it on the wall and use it to display whatever fits.
These little "Minis" are, well some are very useful for setting up action figure dioramas. Depending on the size or scale of the items, they can be used with Marvel Legends, Barbie, even Star Wars. The mini food items I've seen used to make a table of dinner. Basically the anime characters were all having or about to have a meal. There were mini appliances, and the person made other items to finish his room. It was really interesting and it gives a entirely new perspective on action figure collecting and displaying. One person had a really cool diorama set up after a battle. There was a bad guy laid out and Captain America and the Hulk had food among the debris. Makes this hobby much more detailed and unique.
I am a lefty as well. Most left handed people I have spoken to appear to actually be somewhat ambidextrous (both handed). Not sure why this is. Perhaps because we have always had to live in a world made for right handed people? I can do most things with both hands, and in sports I actually prefer playing right handed. I also cut with scissors right handed. However, anything requiring very fine motor skills, like writing or working with small crafts, I always prefer my left.
Another Lefty here and I agree with the ambidextrous thing. I always assumed it's bc we live in a Right handed world? I've also noticed most cats seem to be Left handed. Hmm....
The cardinal was the wrong colour. The cardinal should have been brown (with a orange-red crest, tail and wings ) as that is what colour the females are and they are the ones who sit on the eggs
So you should have done the rope backwards for the blue bird feeder because the knot would be hidden by the inside of the lid and you’d just have a perfect Little loop at the top
Well, since you are new, I just wanted to say welcome! And no, I haven't done that yet, but I'll add it to my video ideas list for sure.😁 Hope you'll enjoy all the other videos on the channel!😉
Everything turned out well. I love your ideas. Did you know the minis also have appliances for the drinks. I couldn't believe it either also I have seen the mini brands create which is the same thing. I love the idea also can't wait to see your new videos. Say golden gb!
I’m a lefty and draw with my left hand and use a mug with my left but cut with scissors on my right… my right arm is also stronger! What’s that all about. There are other things I do with my left hand but that’s for another time
If you get this one again, you should make it so like the hummingbird is flying towards it by using clear Rezin and doing that before you put it together so that you can make the Rezin drip from the birds beak onto the plastic side and then seal it, and then it will look like the hummingbird is hovering towards the food ❤
I have an idea for the hummingbird one!! I have two of those kits and added a second hummingbird to the feeder. I was thinking about making a frozen moment by having it look like a third was flying in for a drink but, the resin coming from the beak leading to the feeder, might look pretty weird?? What are your thoughts??
For something different you can do with this series, you can try switching the birds and the plants. Either putting plants in the bird feeders or birds nesting in a plant pot pr basket.
Hi GB idk if you can remember me. I made a comment on one of your videos a few months ago and you responded. I just wanted to tell you to keep up the good work and never give up! 😁
Small and medium drops of resin on leaves, can look like water...could do a droplet hanging off a leaf..like a frozen moment..making it look like the water drop is gonna fall right off onto another leaf!
I would have painted the bird house. I would have made the roof red and the base a darker brown than the sides. I also would have wrapped the nest around my finger and tried to shape it that way. I would have glued the eggs and the bird in place as well. For the orchid bowl, I think I would try to sand down the sides so you don't see the joining of the 2 halves and put some resin on it to blend it in. I really do love this series over all but I would put my own touches on it for sure.
i kinda want to see all birbs and its feeders all on one tree with big branches? and with some small home made nest and eggs too? i think it would be really cute haha(cause I always wanted like the tree branches accessory holders so I can put my bird and flower themed earings on it so yeah haha)
My suggestions are fir the chickadee go ahead and add mix the seeds outside with the clear resin or else they will spill everywhere. For the robin, I think you could use watered down acrylic to paint the white parts another color, and it would look nicer. Also on the robin, I would use more nesting material to raise everything so you could see the eggs a bit better. Then you might want to use resin to put the eggs where you could see them and they won't roll around. He's a male robin as in birds the males are the more colorful ones; female robins are brownish. I am a big fan of your videos.
Cool video. Loved the birds and plants. ❤ (New here. Are resin and glue the same? What is the difference between using clear super glue vs using resin? Is resin more toxic?)
GB your consistency is amazing :-) Your ideas and details definitely deserve ⭐️⭐️⭐️⭐️⭐️. 😅 yeah that "lets hang" on the packaging wasnt the best. Please keep up with this series ❤❤❤❤❤
I love that you got a cardinal. But they should've given you a female if they gave you a nest and eggs 😂. Or maybe both male and female. But it was still really cool. My favorite birds
For this money they still make a lot of mistakes...........but u made the best out of it......cute,like always......✌️♥️♥️♥️....u need 2 get a doll house and start Dekoration.....that would be sooo much fun.....with all that stuff....the little Book's......a mini Toy Room with all the Play Stuff......Bird's hanging outside..........👍👍👍👍
Yeah I'm going insane trying to figure out how to hang it.. that's why I'm looking it up and yeah I was thinking about gluing it in with clear resin but I have none. I cut my rope really small
That first bird is a chickadee. I grew up in Alaska and they were everywhere. My Grammy collects art of them and I am now going to start my own quest to find and make one of these to send her.
That's such a cool idea!
Looks like a robin
Wow!❤❤
Chickadees are my absolute favorite bird ❤❤❤
I was thinking Chickadee too, but the belly is almost too red. It seems like a cross between a chickadee and a Robin. Still both very common birds haha
Even with the first series, I found it essential to use water resin from the fish to keep the stones in place on the plants, it's maddening to bump one and all the stones go flying! I'm going to use resin to hold the seeds around the edge and to seal the top as you did. Thanks for sharing!
That's so disappointing that it doesn't hold together at all on it's own. It really should come with a little resin to hold things in place. The seed, the bird, the lid, the plant under the soil/rock. All those things need to be stuck on. Tsk on them!
Personally, with the bird feeder/house, I would've tied the knot on the underside of the lid to make it easier to hang and resined the cardinal sitting outside the house on the ledge so it could be seen better.
Next series, I'd like to see a tiny squirrel on one of those little squirrel feeder chairs that hold a dent corn cob or a bunny in a hutch with a little bowl of greens, or a chicken with a chick and egg in a roost.
Tbf, it’s probably for the best to not give kids resin. And I suppose it gives replay value to making it again. But I do with there was a way to keep em together 🥲
good luck they don't care, they're cheap and never want to replace broken things even when you do an unboxing they still want to find cheap ways to use something from your house, so they don't have to mail their mistake. mini company are lame and cheap af
Good to know my favorite miniature creator is also a lefty 🤝
For ideas with duplicates: these are more of a grander scale, but for the birds find a tree that fits the scale and create a diorama of all the birds on the branches, interacting with the miniverse crafts, eating birdseed off the ground etc. And for the plants I have created a little greenhouse to display them all. Not helpful for individual crafts but I hope it's somewhat helpful LOL. Or if you really wanted... add some birds on top of the bird feeder.. with some bird poop.. because we all know there would be some. Thanks for the awesome vid!
For the cardinal; it would look better if you use resin to glue a toothpick or matchstick to the edge of the round hole to make a perch then glue the cardinal to the perch so it's more visible. You also might want to glue the eggs in place so they stay put.
And I would also run a ring of resin around the bird feeder before filling the outer ring with seed. Then if it gets tipped the seed won't spill.
For both of the ones with the rope, I would tie the knot INSIDE so all that shows is the loop. I DO like that you glued the lid on the feeder.
Hello! You don’t need resin or glue for the chickadee bird feeder.
The top pops on like the bottom! It’s a tight fit, but holds very well.
Love your videos!
Came here for this comment! I made the same one not long ago and the top popped on and fit like a glove! Not sure why he didn’t try a bit harder to get it to snap on
Love your videos; the shovel is called a trowel in gardening xx stay golden xx
So glad I found your channel! It’s so fun and relaxing watching your videos ❤ For all the Lifestyle Home Series, I ended up using resin to hold all the plants in and rocks down. I used mold making putty and made a mold of the cardinal so that I could make a female cardinal. After some trial and error and a paint job, she turned out great! 🐦
I look forward to your videos every week!
Not sure if you noticed but the bird boxes actually tells you what kind of bird it is & what all come in the box😁🪹🪺🪶
I didn't see that
these are the cutest things ever i cant
Not sure if you noticed but the stick with the orchid had a lil clip where you can clip the stem of the orchid to Keep it stable
I was just about to tell him he was supposed to do that
He did use the clip. Watch again
@@private15 I think they might have actually meant the tie on the base of the stem/top of the bag that would tie around the bottom of the bamboo and be hidden by the rocks. That would have helped but he did use the little clip at the top of that is what they actually meant lol.
I could watch you do this for hours 😊 the nest looks like a toupee 😂
BRO HE USING THE RESIN 💀
That's exactly what I've done with my plants I've gotten, cause I'm always knocking things over in the dollhouse, so I had to. Especially the ones with rocks. I don't want tiny rocks spilling over all time.
Aswan fuck man
😂😂😂😂😂😂😂❤❤❤❤❤😢
that fiddle leaf fig looks so cool! it’s awesome that they include nursery pots
I'm 42 so at the age where I don't get all this mini fascination. But watching this I feel I'm missing out and need to buy some! They are really detailed
Well if you end up getting some, I hope you'll enjoy the process and your mini creation!💛
I had to use Glue to get the top of the bird feeder to stay because they either made an error or changed it mid-production. I also coated the seeds in the tray with glue so they don't go flying everywhere. Glue-All worked just fine but takes longer for it to dry
You are the worst
I love this! You know, you can get great house plants at Trader Joe’s, in case you’re close to one. The one near me, has them for about $12.99 to $14.99, for low maintenance house plants most of the time! It’s been very fun to me to learn about them, and try to encourage them to grow. I have a feeling you would like it as well. I always name everything, so I like picking out their names too, lol! Have a great Saturday!! ❤
Hi 👋 it's good to see you 😊 and I hope you are doing well 😊 and that everything is going well for you 😊 and that you're having a happy weekend and a happy Saturday 😊 . Also please remember to take care of yourself 🙏. Also I hope you enjoy the mini brand figures 😊 you got today 😊 or that you unboxed today they are really interesting 🤔 looking. Also you are amazing 🤩 so keep being you cuz you're awesome 👍😎🙏.
the cardinal is beautiful, but it should’ve been a female one since they included eggs. males don’t sit on the eggs. 😅
With the size of the box the bird comes home in they could have given both a male and female. The set would look cuter, at least for me, if the bird didn't look so lonely. Even if the birds 🐦 are seen more often alone. But just a thought.❤
@@tymothyyoung1530 i agree, an entire tiny bird family would super cute! i particularly have an affinity for those adorable brown ones. 🤎
@frienjie7148 I have been like eeeeeeeeekkk if the box opened and it was mumma dad and eggs or even a tiny group of chick's. Or for the feeder a few adult birds so it was more like a proper garden feeder with birds all over just snaking and hanging out.
Be kinda funny if there was a feeder with a squirrel sneaking bird food 🤣.
@@tymothyyoung1530😂😂😂Yessss, get the pesky squirrel!
@MoonlitBookworm73 hahaha yaaasss those squirrels, it would need to be a red one for me though, they are too cute 😍 😆
Hey, lefties are cool 😎
I use my right hand for scissors, can openers, most of the stronger things
The delicate things, like writing, with my left
I can also change hand, whilst painting, or varnishing, when one hand gets tired
We are practically ambidextrous 🙌🏼😉❤
On the cardinal I would resin it to the roof overlooking its nest .. build up the nest in a way to see the eggs .. maybe a little resin on the eggs to hold together.. maybe
I just got done watching a kinda creepy analog horror series...so I needed this wholesomeness right now lol.
this is my favorite series so far! I’ve been pleasantly surprised by each one I’ve opened :)
Just a heads up. There are cheat codes on mini verse make it now. Small pinholes That let you know what's inside the ball. Also mini brand just came out with it's own line of make it's... Master chef...and BTW. The tiny bird is a chickadee. Hope you have a great day.
Why would someone want to ruin the surprise for themselves or anyone else who picks up one after someone has tampered with it? That's just awful.
@@somegurloverthere no one is tampering with the balls. The factory puts in the pinholes. And some people don't want to spend their whole paycheck just trying to get the humming bird feeder for their kid. Some people are sick of doubles. Pick blindly if you need the surprise. I'm going to use the codes. That's how I got the pickles first try
Code/pinhole, like outside on the ball? I’d love to avoid lots of duplicates
Also, do you just peak through the pinhole?
@@barmhjertige1 the pinholes are in different positions on the ball.. so you need the cheat sheet that's posted on Tic Tok and reddit. It shows you exactly where the factory put the hole. It's pretty accurate .. I went back and found the Popsicle mold. The holes are very tiny. I couldn't see them without reading glasses. Hope that helps. There are videos on RUclips that shows you where they are.
Love the birds and plants
I could watch this for hours! Love to build miniverse, too
GD! Suggestion for house plant: get a zamioculca plant! They grow luscious and beautiful without much care. Great plant for beginners in plant parenting :)
Always Amazing. To do different: with your cardinal you ended up with more nest material at the end take some of that and place it underneath the back of the house and place the eggs on an angle. Almost as if they’re on a riser. I’m going to do my video today trying the method and I will post on my instagram and my channel hopefully by tomorrow. Thanks for the inspiration. STILL THINKING ABOUT YOUR MEAL VIDEO. Thanks GOLDEN!
hi GBK,I am a new subscriber and i absolutely love your videos❤ your voice is so amazing and your personality is even amazing-er😂 keep it up!
Hello new Sub! Welcome to the Group!!!
Im in awe of this process I love the series thank you
❤ I would love a series where you customize all of the miniverse items ❤ love how creative you are ❤
I’ve seen mini brands is getting into the resin mini food game. Hopefully they will provide some good competition for mini verse
To make something different you can make a bird trapped in a bird feeder 😂😂😂😂😂😅
That made me laugh 😂
Put the bird on the plant ?
😂 I would have stuck the heck out of that birdseed. I love these, my favorite is the hummingbird, I need to watch that one.
Oh! I just bought my 1st mini verse balls tonight! Target had a selection, I bought 6 series 2, no duplicates and I got the teapots and cups I wanted, a vase, and some candles and plants, the mold kits, love them. 😂
When I made this one cardinal birdhouse I put the knot on the inside of the house .. can seal it with resin and hide the knot.. I put the bird on the outside and used resin to set the nest and eggs
I've always called that little shovel a spade!!
I dunno with yall but I was admiring his nails from time to time. ❤
I'm so excited to see more of the home series they are super cute. Love all the diy minis. The little shovel is called a trowel ^-^
Definitely a chickadee. I'm definitely going to use resin to make my soils and rocks and birdseed stick, so if my display gets jostled, it's not a catastrophe lol. I have cats, and a 15yo kid, it's going to get touched. I actually have 2 nice antique wood newspaper drawers that held numbers and letters, so I'm going to hang it on the wall and use it to display whatever fits.
Hello
These little "Minis" are, well some are very useful for setting up action figure dioramas. Depending on the size or scale of the items, they can be used with Marvel Legends, Barbie, even Star Wars. The mini food items I've seen used to make a table of dinner. Basically the anime characters were all having or about to have a meal. There were mini appliances, and the person made other items to finish his room. It was really interesting and it gives a entirely new perspective on action figure collecting and displaying. One person had a really cool diorama set up after a battle. There was a bad guy laid out and Captain America and the Hulk had food among the debris. Makes this hobby much more detailed and unique.
I am a lefty as well. Most left handed people I have spoken to appear to actually be somewhat ambidextrous (both handed). Not sure why this is. Perhaps because we have always had to live in a world made for right handed people? I can do most things with both hands, and in sports I actually prefer playing right handed. I also cut with scissors right handed. However, anything requiring very fine motor skills, like writing or working with small crafts, I always prefer my left.
Another Lefty here and I agree with the ambidextrous thing. I always assumed it's bc we live in a Right handed world? I've also noticed most cats seem to be Left handed. Hmm....
The cardinal was the wrong colour. The cardinal should have been brown (with a orange-red crest, tail and wings ) as that is what colour the females are and they are the ones who sit on the eggs
Lefties unite! I do think living in a right handed world is a huge influence
Yep, ambidextrous lefty here. Literally the only thing I do solely with my left hand, is writing. I actually can't use left-handed scissors! 😂
@@MsCaziline yes!!! Me neither! When I was in grade school, the teachers always tried to get me to use Left-handed scissors, and I could not do it!
I love them 😍
They are so pretty 💞
Well done, Golden Boy 🏆🏅✨
Chickadees are so cute, I'm from Massachusetts and it's our state bird. 😊
Was so happy to see another video! Just found you maybe a week ago and have been binging your videos! Keep up the awesome work!
I have been waiting on this ❤
Definitely need to add an adhesive or resin stuff down. I will be doing that for sure for mine. Thanks for sharing
I *NEED* the bird ones, but especially the chickadee 🥺
So cute❤ I love this😊
The sound of his voice is ncie and I love how he shows us how he made it!
I just bought my first few minis. I wasn't sure what to do with them after I made them. They are now the best refrigerator magnets ever!!
That's a very good use for them!😁
So you should have done the rope backwards for the blue bird feeder because the knot would be hidden by the inside of the lid and you’d just have a perfect Little loop at the top
I love this series so much! You did an excellent job as usual.
Why thank you!😄
could you do a video showing all your "mini makes" sitting together sorry if you have already done this as I am very new to your channel x
Well, since you are new, I just wanted to say welcome! And no, I haven't done that yet, but I'll add it to my video ideas list for sure.😁 Hope you'll enjoy all the other videos on the channel!😉
Those are really cute. ❤
Everything turned out well. I love your ideas. Did you know the minis also have appliances for the drinks. I couldn't believe it either also I have seen the mini brands create which is the same thing. I love the idea also can't wait to see your new videos. Say golden gb!
The episode was very nice and the birds so cute and pretty, your videos are really nice I like it
I’m a lefty and draw with my left hand and use a mug with my left but cut with scissors on my right… my right arm is also stronger! What’s that all about. There are other things I do with my left hand but that’s for another time
I loved it you did it I enjoyed watching
If you get this one again, you should make it so like the hummingbird is flying towards it by using clear Rezin and doing that before you put it together so that you can make the Rezin drip from the birds beak onto the plastic side and then seal it, and then it will look like the hummingbird is hovering towards the food ❤
Your videos are keeping me sane right now im sitting here with 25 inches of snow and it’s still going 😂
5:35 you could do a frozen moments where the birds are flicking seeds off into the air
YESS I FINALLY FOUND a COMMENT. THAT'S TALKING ABOUT a FROZEN MOMENT
My son loves chickadees. He'd love that feeder.
I have an idea for the hummingbird one!! I have two of those kits and added a second hummingbird to the feeder. I was thinking about making a frozen moment by having it look like a third was flying in for a drink but, the resin coming from the beak leading to the feeder, might look pretty weird?? What are your thoughts??
For something different you can do with this series, you can try switching the birds and the plants. Either putting plants in the bird feeders or birds nesting in a plant pot pr basket.
Your nails are beautifully manicured!
Awesome video, love your vibe and skills !
Thank you!💛
I just opened this one today and it is, by far, my favorite. Your Cranky Turtle Viewer in WV
☕️🐢💙💛
Your tweaks are super helpful
Hi GB idk if you can remember me. I made a comment on one of your videos a few months ago and you responded. I just wanted to tell you to keep up the good work and never give up! 😁
Small and medium drops of resin on leaves, can look like water...could do a droplet hanging off a leaf..like a frozen moment..making it look like the water drop is gonna fall right off onto another leaf!
Thanks for the tips!😍
@@GBKuhleen u are very welcome 🤗😁
I would have painted the bird house. I would have made the roof red and the base a darker brown than the sides. I also would have wrapped the nest around my finger and tried to shape it that way. I would have glued the eggs and the bird in place as well. For the orchid bowl, I think I would try to sand down the sides so you don't see the joining of the 2 halves and put some resin on it to blend it in. I really do love this series over all but I would put my own touches on it for sure.
The male cardinal doesn't usually sit on the egg so I glued it in the opening (round) to make it more visible.
Windy City?? I grew up in Chicago and now live in a southwest suburb. I'm new to your videos and enjoying them greatly! Keep up the good work!
Make it lifestyles are held together by vibes and kinetic sand
I love the orchid and want to find it! Needs resin to seal it together no question
It's called a trowel 😂 bless you x a hatchet is a small axe 😊
Yep, found out eventually 😂
i kinda want to see all birbs and its feeders all on one tree with big branches? and with some small home made nest and eggs too? i think it would be really cute haha(cause I always wanted like the tree branches accessory holders so I can put my bird and flower themed earings on it so yeah haha)
Love this!
Trowel! the little shovel is a trowel!
I just want the plant 🪴 ones so i can put my tiny baby succulents in ,they would look soooooo sweet. ❤❤
My suggestions are fir the chickadee go ahead and add mix the seeds outside with the clear resin or else they will spill everywhere. For the robin, I think you could use watered down acrylic to paint the white parts another color, and it would look nicer. Also on the robin, I would use more nesting material to raise everything so you could see the eggs a bit better. Then you might want to use resin to put the eggs where you could see them and they won't roll around. He's a male robin as in birds the males are the more colorful ones; female robins are brownish.
I am a big fan of your videos.
What’s interesting is that this is a male cardinal and he’s probably guarding the nest. The females are orange in color. Very beautiful 🥰
The shovel you're referring to is called a garden trowel 😊 hope this helps
I think you should use clear resin on the outside of the Chickadee feeder
Cool video. Loved the birds and plants. ❤
(New here. Are resin and glue the same? What is the difference between using clear super glue vs using resin? Is resin more toxic?)
Hi GB Kuhleen I love your videos stay golden 😉
GB your consistency is amazing :-)
Your ideas and details definitely deserve ⭐️⭐️⭐️⭐️⭐️. 😅 yeah that "lets hang" on the packaging wasnt the best. Please keep up with this series ❤❤❤❤❤
I got a few, but I really wanted the bird feeder or the birdhouse. Didn't get either, but got 2 monstera.
OMGG I need mini-verse to come to my country right now! 😭😭
Another name for the trowel is a gardening spade or spade :D thank you for sharing the experience :D
Good to know!😅
I love that you got a cardinal. But they should've given you a female if they gave you a nest and eggs 😂. Or maybe both male and female. But it was still really cool. My favorite birds
omg the plant too!
these look so fun i need to get one haha
For this money they still make a lot of mistakes...........but u made the best out of it......cute,like always......✌️♥️♥️♥️....u need 2 get a doll house and start Dekoration.....that would be sooo much fun.....with all that stuff....the little Book's......a mini Toy Room with all the Play Stuff......Bird's hanging outside..........👍👍👍👍
The o I've dropped the bird got me dying
It's just a, VERY OLD, way of saying
Let's hang out ✌🏼😊
? Did the bird in the background come with the bird feeder to make a couple?
The straw in the box would make perfect nest for the birds.
Yeah I'm going insane trying to figure out how to hang it.. that's why I'm looking it up and yeah I was thinking about gluing it in with clear resin but I have none. I cut my rope really small
I just seen a chickadee today I love birds God made a good creation