Thank you sooo much for putting so much care and love into your pieces!! My daughter absolutely loves her green key keychain!! She got on school van and told driver and her classmate that it's from RUclips Australia lol!! I absolutely love mine too!! There adorable is very well made!! Thank you soo much!!💗💗💗
Your work is so amazing. Please can you tell me what was the white liquid you used behind each of them and why. I learnt so much from you thank you. Your work is amazing.
@@SeriouslyCreativehi there, did you make a tutorial about how you paint into the crevices of these pieces and remove the paint? I can’t find it and I’m very interested in learning how you do it. Thank you for all you tutorials….I love them all!
Thank you so much for sharing your creativity. I am learning a lot from you! So inspiring ^^ I still stuggle a bit removing the black acrylic painting. What do you spray over it to take it off? Many thanksss
You are my inspiration for most of my resin creations! I just started delving into mica powder (it is beautiful to work with) because you gave me a confidence boost lol 😂
I absolutely love your work!!! I was wondering though, how do you not get bubbles around the raised design in the mold when pouring? I have molds similar and i constantly get bubbles all around the raised design 😢 Thank you in advance! ❤
Hey thank you! I still get small bubbles but I try to displace them using a tooth pick. Once the final top coat is on the tiny bubbles are almost impossible to see if there is any.
what is the frothy white stuff you put on the backs of your pieces? and what is the purpose of it, since you peek it off later? (i've never done resin stuff before so i'm a complete n00b. lol)
very late here.... it's pva glue! she uses it so that when she does the clear layer of resin it doesn't spill over and ruin the whole piece since it's easy to peel off :)
What was the glue for? Was it simply to hold the piece in place for the doming? I dont think it was...maybe so no resin gets on them from doming it? Lol why the glue on the back??
Haha thank you! I usually just spray a bit of windex or water once its dry. Also remember the sped up vid always makes it look easier... its still takes me a bit of time
When you put the glue on the back before doming...may I ask what the benefit to that is? I've never seen that done before, so I am curious. Thank you for sharing this!
Thank you sooo much for putting so much care and love into your pieces!! My daughter absolutely loves her green key keychain!! She got on school van and told driver and her classmate that it's from RUclips Australia lol!! I absolutely love mine too!! There adorable is very well made!! Thank you soo much!!💗💗💗
Oh my gosh that is sooooo sweet, thank you I'm so glad you both like them! That's made my day she was so happy with it haha 🥰
That shine on the molds you used is amazing! And I enjoyed this longer process video! 💖😍😍
Woooo yay thank you, glad you liked the longer vid, i was worried it was too long 💖
Your work is so amazing. Please can you tell me what was the white liquid you used behind each of them and why. I learnt so much from you thank you. Your work is amazing.
Just BEAUTIFUL - From One Creative to Another - AWESOME JOB!!!
Watching your videos is kind of mind relaxing ma'am. Good job.❤
That is so nice to know, that is what i aim for 💖
@@SeriouslyCreative ❤
I enjoy watching you create. I am only new to resin artbut you give me confidence. Thanks
Me too still trying letters and shakers
Thank you that is so kind 🥰 good luck with your resin making!
OMG love the keychains !!! So cute !!!
Could you do a tutorial on how you paint and remove the paint on your pieces??🥰😍 I love your work !
Good idea! I will make one 💖
@@SeriouslyCreativehi there, did you make a tutorial about how you paint into the crevices of these pieces and remove the paint? I can’t find it and I’m very interested in learning how you do it. Thank you for all you tutorials….I love them all!
Beautiful colors! Lovely items! 💜
Thank you so much! I was happy with how they came out 💖😊
Thank you so much for sharing your creativity. I am learning a lot from you! So inspiring ^^ I still stuggle a bit removing the black acrylic painting. What do you spray over it to take it off? Many thanksss
Thank you so much for watching! Sorry for the late response, its just windex. I saw someone do it and i thought I'd give it a go!
Your doming work is amazing!!!
Thanks! Credit goes to Just Resin 😝
Those molds are so cute!
Aren't they gorgeous?! "Designed with a twist" on Instagram. Fantastic quality too
Awesome 🤩! I like all your works.
Thank you i appreciate that so much!!
Trabalho lindo! Amo resina ❤️❤️ São tantas coisas incríveis…
Those look incredible 😍
Thank you so much Mandi 💖
We love the JR brand - can’t wait to receive our FIRST order.
Yay! I love it too!
These look so great. If you do special orders, would you ever consider using a specific acrylic paint color, like a deep blue instead of a black
Thank you so much! yes I usually use dark purple in the etchings so I'd be happy to do it for customs 😊
You are my inspiration for most of my resin creations! I just started delving into mica powder (it is beautiful to work with) because you gave me a confidence boost lol 😂
Aw thank you! Mica & chameleon powders are my fav to work with, they're so pretty 😍
What do you spray the resin with the remove the excess black paint?
I am also curios as to what you used to spray to remove the extra paint? These came out amazing btw! Always fun to watch your videos! 😊
It was windex 😂 i saw someone else do it and thought I'd give it a go
@@SeriouslyCreative that's amazing!! Thank you so much x
@@SeriouslyCreative lol 😆 it looks like it worked very well! Thank you I must try it!
I absolutely love your work!!! I was wondering though, how do you not get bubbles around the raised design in the mold when pouring? I have molds similar and i constantly get bubbles all around the raised design 😢 Thank you in advance! ❤
Hey thank you! I still get small bubbles but I try to displace them using a tooth pick. Once the final top coat is on the tiny bubbles are almost impossible to see if there is any.
What do you spray with and what kind of cloth you have? 🙏🏻💞 ❤
Здравствуйте. Очень красивые работы, интересно было посмотреть вашу работу.🌹
Those are awesome
Thanks so much i was happy with them 🥰
What are you spraying on the painted items to remove the excess black paint?
I really love these, but I am curious, what did you spray on them to get the excess paint off?
Windex 💖
Nice work
💖💖💖
Omg I want one!! 🥰
My Etsy shop is on holiday at the moment, but if you really want it just send me a message and i can organise it for you x
what is the frothy white stuff you put on the backs of your pieces? and what is the purpose of it, since you peek it off later? (i've never done resin stuff before so i'm a complete n00b. lol)
very late here.... it's pva glue! she uses it so that when she does the clear layer of resin it doesn't spill over and ruin the whole piece since it's easy to peel off :)
What is that stuff that you put on the back before doming? I’m allergic to latex so I’m trying to find an alternative
Hi Amber, here's a video i made about it ruclips.net/video/QCeyVVX5LGo/видео.html
@@SeriouslyCreative ohhh thank you so much
Is that black acrylic paint? What do you use to wipe off the excess paint if you don’t mind me asking?
Yes black acrylic, just windex or spray water will help it wipe off 😊
@@SeriouslyCreative thank you 😘
What was the glue for? Was it simply to hold the piece in place for the doming? I dont think it was...maybe so no resin gets on them from doming it? Lol why the glue on the back??
To protect the piece from over spill when doming 😊 I have a video on it if you'd like to learn more
A few questions are they fully dry before you add the black paint and how long is paint left on before whipping off with what( soapy water)?
Yes fully cured before i wipe it 🥰
Please what material like white gum put in resins to make shine ca n you give me the names ؟؟؟
I thought that was liquid latex on the back but it isn’t. Would you mind sharing what you use?
Yes its pva glue 😊 i have a video on it but basically same concept as the liquid latex
Love these! ❤
What are you using to clean off the paint? I have such a hard time getting the excess off 😬
These are amazing btw. Got so distracted by how easy that paint came off 😂
Haha thank you! I usually just spray a bit of windex or water once its dry. Also remember the sped up vid always makes it look easier... its still takes me a bit of time
@@SeriouslyCreative Windex! That is so smart! Thank you! *Rushes to horde the Windex*
When you put the glue on the back before doming...may I ask what the benefit to that is? I've never seen that done before, so I am curious. Thank you for sharing this!
Hi Carissa, here's a video i made about it 😊 ruclips.net/video/PJP2ohAimeg/видео.html
Did you use UV resin to dome?
TIA 🌺
Nope i use Just Resin for all my doming, i have a link in the description if you want to try them 💖
What is the white paste and the black paste u put on them called? Im a newbies with this sorry.
ruclips.net/video/QCeyVVX5LGo/видео.html
@@SeriouslyCreative TY pva glue woooow! Lol!
Learning everyday I want a business with resign to me its a release of stress.
Where did you get the molds
From Designed with a twist on instagram! they're linked in the description 😊
Hello I actually have a question, if you buy a mold from someone and created resin art from that mold are you allowed to sell the resin art?
Generally speaking, yes. Using molds with licensed characters can push the copyright boundaries, so I'd be careful with that.
6:26What is the name of the substance you put it on the resin?
ruclips.net/video/QCeyVVX5LGo/видео.html