Sunday morning coffee and haggin out with my bros at I Am Detailing!! Damn these videos are always so well done. Easy listening music with excellent editing and flow. Jakub you are a master at self promotion!! It's so entertaining to watch your business grow month by month. I'm sure you will be adding a prestigious piece to your car collection very soon....gord
Thanks Gord! We make these videos for you all, first and foremost. You guys make it all worth it and the support inspires us to keep innovating and getting better. Thank YOU
For protecting wheel bolt wells / etc when installing wheel bolts, a high quality tool with a plastic protective socket cover integrated is available from Japanese tool maker Ko-ken in 17mm, 19mm, and I believe 21mm. It has a low profile (slim tool and should fit into even some of the more demanding tight deep wheel bolt holes) and an extended shank which is ideal as a one piece tool to skip the addition of an extension to clear the body/paint work when torquing wheels. I believe BMW is about 120nm for wheel bolts which should be fine for most every vehicle of the types you guys often specialize in with cast alloy wheels. Not affiliated in any way, I own the 17mm socket only, but it is a nice tool. Half inch drive. Also they offer wheel installation "hangers" (metal rods) that thread into the hub and help hang the wheel. After a long day I'm sure that wheel and tire combo can feel a bit heavy and awkward with a stiff back! In fact I am rather confident BMWs 80s tool kits and into the 90s have a plastic tipped long-ish metal shaft designed to exactly help hang the wheel when installing it to the hub. Lot of work there. I'm tired just watching!
It most certainly still has its place, especially on a budget. Dry ice is rather expensive, but it’s fast and works incredibly well. Steam gives great results, but has its limitations, and takes a lot of time
@I AM Detailing My buddy was really into detailing. He drove an M3 at the time and I recall him even having a machine that did steam for his personal setup. He would have friends come over and help them detail thier cars. So that makes sense to me that steam is more of a budget option or something one could have as a hobbyist.
Perhaps it would have been good for him due to the dirt that the car brought, a decontamination of lime and before drying with the towel to have made the foam peeling + washing + iron decontaminant + passing the clay and drying without a towel only with pressurized air. I think the vehicle deserves those steps so that with the polishing process, finish finishing the car's paint. Thank you very much for the video.👍
Had to stop the video 1/2 way through. Drooled all over my shirt. What a beauty. ❤❤❤
In my opinion best detailer on RUclips! Absolutely perfect!
🥹🙌🏽
Achtung baby! Coffee and 'mo with Jake & Co. Happy Sunday compadres
Happy Sunday Peter!
Morning. Excellent. 😎🔨👊🏻
One of your longest videos to date.
Yessir! Thanks Joe! I was just talking with Jakub about that last night. It was a doozy! Car was here for a while, and edit took a while too
You and your team are obviously perfectionists. Thank you,
Awesome. Never seen something better. He‘s a master
🫡🙌🏽
😄👏😁
Only the best detailers know how to get black paint perfect. 👌🏻
Wait until you see Friday’s Aston Martin video droppin ;)
Sunday morning coffee and haggin out with my bros at I Am Detailing!! Damn these videos are always so well done. Easy listening music with excellent editing and flow. Jakub you are a master at self promotion!! It's so entertaining to watch your business grow month by month. I'm sure you will be adding a prestigious piece to your car collection very soon....gord
Thanks Gord! We make these videos for you all, first and foremost. You guys make it all worth it and the support inspires us to keep innovating and getting better. Thank YOU
👏👍🤟😄
I love this long detailing video ❤️ is amazing, this Porsche Turbo is better than new 😍 thank you for this moment with you.
Another Stuttgart stunner ! Great job !
Clearer than a mirror!
Mirror mirror, on the Porsche, who’s the fairest of them all?
A very special Porsche.
That's Incredible!
Thanks Mark!
I like these longer videos.
great job
Another great video !
Subscribed since 115K Subs. loving the growth
Thanks so much John! We’re climbin steady!
El Porsche perfecto 😍
Esta muy bien
Extreme satisfaction!!
For protecting wheel bolt wells / etc when installing wheel bolts, a high quality tool with a plastic protective socket cover integrated is available from Japanese tool maker Ko-ken in 17mm, 19mm, and I believe 21mm.
It has a low profile (slim tool and should fit into even some of the more demanding tight deep wheel bolt holes) and an extended shank which is ideal as a one piece tool to skip the addition of an extension to clear the body/paint work when torquing wheels.
I believe BMW is about 120nm for wheel bolts which should be fine for most every vehicle of the types you guys often specialize in with cast alloy wheels.
Not affiliated in any way, I own the 17mm socket only, but it is a nice tool. Half inch drive.
Also they offer wheel installation "hangers" (metal rods) that thread into the hub and help hang the wheel. After a long day I'm sure that wheel and tire combo can feel a bit heavy and awkward with a stiff back! In fact I am rather confident BMWs 80s tool kits and into the 90s have a plastic tipped long-ish metal shaft designed to exactly help hang the wheel when installing it to the hub.
Lot of work there. I'm tired just watching!
Thanks for the tip Spencer! I’ll check it out
I have watched many videos but I have never seen such a cleaning. Bravo great job.
If I have financial situation, I want to do it in Turkey.
Thanks for the support Edward!
What an amazing work! You guys are the best…
Thanks Oliver!
Keep up the awesome work!!
Thanks C!
Excellent!👍
🙌🏽
Hot Wheels!😀
Honestly I think every Porsche from 1980 to 1995 in America have driven themselves there and are currently sat outside this shop waiting patiently 😜
🤣🤣 amazing. Thanks for the best chuckle of the morning!
You guys have got to do a VW BUG 😜 just to make this a reality lol
Quality.. not kidding!! he
Like!parabéns 👏👏👏🇧🇷🇺🇲
¡Alucinante!
I swear these dry ice guns are witchcraft. “Now just point the white tipped wand at the car and the dirt will magically disappear!”
You are the best, professional❤️🧢✌️
Really appreciate that buddy
Great video! I remember steam being popular for detailing. Has that fallen out of favor with this dry ice method?
It most certainly still has its place, especially on a budget. Dry ice is rather expensive, but it’s fast and works incredibly well. Steam gives great results, but has its limitations, and takes a lot of time
@I AM Detailing My buddy was really into detailing. He drove an M3 at the time and I recall him even having a machine that did steam for his personal setup. He would have friends come over and help them detail thier cars. So that makes sense to me that steam is more of a budget option or something one could have as a hobbyist.
Profissionalismo total.
28:31 seems to me it's not the interior belongs to turboS with carbon parts guys worked ) anyway perfect work
Yes you are right 👍🏽 good eye
My video editor is blind sometimes and also with amount of Porsche projects I giving him it can be confusing sometimes 😁
@@IAMDetailing Briliant work , no words ! cheers from Ukraine !
Are the car detailing products that use for sale?
Perhaps it would have been good for him due to the dirt that the car brought, a decontamination of lime and before drying with the towel to have made the foam peeling + washing + iron decontaminant + passing the clay and drying without a towel only with pressurized air. I think the vehicle deserves those steps so that with the polishing process, finish finishing the car's paint. Thank you very much for the video.👍
Why did you remove the lights before washing??
Perfect!!!🚗 👏👍🤟
🤩
OMG, how can such a rare collectible dream car become so filthy? Barn find?
Or being used properly ;)
Why did you show the interior of a 964 at the end?
Time spent.. how much is it?🚗
👍🏽
Okey
Always believe that bits get missed when dry ice cleaning underbody. What’s the point if only 98% gets cleaned ?
Disappointed that the wheels weren't completely cleaned
Los asientos hay que quitarlos si quieres hacer una limpieza……lo que has hecho es una guarrada
I'd like to work for you, I'd do anything for free until I reached expert level.
Okey