HOW TO CLEAN CLOGGED EPSON PRINTHEAD | EPSON | PRINTHEAD L120
HTML-код
- Опубликовано: 5 фев 2025
- #EPSON #EPSONREPAIR #DIY #EPSONL120 #PRINTER #EASY #CLOGGED #CLEANING
Hey there!
Here is another video but not about ART :-).
Just want to share how i deal with my clogged printhead.
DISCLAIMER!
I 'am not a pro. Not a technician but been doing this for a couple years now
and so far haven't got any problem..
Cleaning solution and syringe is available online :-).
Thanks Guys!
Follow Me!
Instagram:
/ arts_craftbyarteh
/ artehni_isay
Tiktok:
www.tiktok.com...
FB Page:
/ artehniisay
Nice , what can be used as cleaning solution ?
very informative classmate
Thanks classmate😊
Thank you for sharing idea idol
Thanks for watching kuys!
Wow
thanks....
Welcome
After ba nyan sayo gumana pa?
Can alcohol be used as a cleaning solution? Thank you.
No I don't think so.
its okay to get wet the board or the pins lol, its just an alcohol and distilled water
i have same problem but for the black heavily clogged. tried cleaning and it cleared but after that it was clogged again when i tested it one last time before putting it back in the printer, it is heavily clogged again no cleaning solution was coming out while magenta, yellow and cyan are ok
Believe it or not it's frustrating. I lost count how many times I repeat the process over and over again. I also try soaking it for a day, just make sure that the cleaning solution is just enough to touch the header bed. Be cautious of the part of the header that is not supposed to get wet. Goodluck! Let me know if it works😊
@@ARTehh yep. i am so tempted to soak this with paint thinner just putting the thinner on a rag or cotton just to see how it will affect the head
forgot to mention the head cleared again by soaking the insides with 70% alcohol overnight. i will wait till tomorrow to see if it will stay clear
@@davetherandomfanboy oh no. Don't use anything other than a cleaning solution. It might damage the header. But I hope it will work. Fingers cross.🤞
@@ARTehh so far the print head of L130 became unclogged again. hopefully it remains that way until i put it back together for actual print test
note i did no use the any other cleaning solution except for the syringe, alcohol (70%) and just blowing air in the head by use of the syringe
@@ARTehh update the print head cleared with alcohol
Can I know paano po tinatanggal ang print head sa printer mismo?
Ginawa ko na to kaso kahit pag lumalabas na yung cleaning solution may bara pa rin. Ano po kaya pwede pa gawin? Masasalba pa kaya printer head ko?
Anung ink mo kuys?
Ung isang printer ko pigment ink un almost 2 yrs ko na syang di gnamit kc kinain ng daga ung hose nya almost a week ko din nilinis ung head
@@ARTehh subli gamit ko sir. 2 years din di nagamit sir. May mga potential client din kasi. Sayang. Mahal kasi print head.
Gawin mo kung di ky mawala ng isang upuan na linis , ibabad mo ung header sa cleaning solution ung tama lang na maabot ung header ha. Ginawa ko un tapos repeat process lang almost a week din cguro bgo maging ok na.
Let me know kuys kung naging ok😊
O sayang talaga ung sa kin 6 color pa tyagaan lang kuys. Babad konting cleaning solution lng maabot lng ung head tapos check mo daily same process lng hangng mawala n ung bara
ano po cleaning solution mo. parang walang epek ang cuyi e
what if yung isa g color barado talaga, hindi makalabas yung cleaning solution
Gingawa ko binbabad ko sya sa cleaning solution
@@ARTehh hello po. Paano niyo po binabad sa cleaning solution po? Sana po ma-reply-an kasi yung color black po nung akin mukhang clogged na. Salamat po
@@markangelomendeguarin508 naayos ba sayo boss?
pano po ayaw lumabas nung cleaning solution
babad mo lang po muna. malamang natuyo na sya sa loob.