Thanks for you humble comment. I am presently working in matrix and its been 1 year. But I need to learn more & more and specially I learnt a lot from your video. Keep doing such tutoral. Thank you sir...
At the end of this film, I didn't see the merge(boolean) about the pre-made surface and the tire tread pattern. If I want to 3D print them, shall I boolean them? And at 15:37, the red circle at right-up screen, what did it mean?
It's me again. While I put the tire pattern back onto the circle surface, the tire pattern appeared inside the circle surface. What should I do to reverse them to the right direction? Thank you,.
PJ... i really hate that flow along surface command. I never obtain the same results. I did all the sam way as you and at the moment to flow...the Parts flow along the top of the surface of the ring but it continues to inside the ring! It doesn’t flow only on the top of the ring’s surface like yours... :(((
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
It is fascinating to see how you explain the commands and how you use them to make a beautifull ring. Thanks again PJ!
You are welcome Josja. and I enjoy to see your shareing your work. Keep up good work too.
Another PRO TIP for the Flow along surface!
Glad you like it
Great video. Thank you for posting so clearly. It was very easy to follow. You are a great teacher.
You are welcome!
I really love this design, The real thing to say is that I love and follow all your designs.
Thank you! Nice to have you here. Stay tuned for more.
May I know where are you from sir?
Detroit Michigan in USA
Thanks for you humble comment. I am presently working in matrix and its been 1 year. But I need to learn more & more and specially I learnt a lot from your video. Keep doing such tutoral. Thank you sir...
thank you for a thousand times, you are amazing
You are very welcome. Avni. and welcome to my channel.
Thank you. I don't speak much English, but I understand your videos perfectly.
Love it. That is perfect, glad to help.
谢谢Chen老师，你小视频很棒！You don’t know how much you helped me out. I am a PhD student learning how to use Rhino and Grasshopper so this is perfect!
Hi Adrian, Happy to know my video helps. Stay tuned for move videos!!
Hi Adrian. I am wondering where do you learn Grasshopper ? Thx
I think this the easiest way to teaching such commands.thanks.
You are welcome!
You are a great teacher.
Keep watching. more to come!
You are a Great TEACHER
Thank you! 😃
Thanks you alot. Great video like always
No problem!
I learned so much thanks to you. Thanks for everything.
You are very welcome!
you are such a great teacher!! Thank you!!
You are very welcome, Trudy. Welcome to my Channel.
Very cool PJ thanks!
No problem 👍
Perfect. Thanks a lot 🙏
You're welcome 😊
Thank you sir for free subscription
You are welcome. Stay Tuned for more.
Thank U !!!!! Perfect !!! You are a great teacher !!!! Thank U ...
You are welcome!
thanksss so0o much
You're welcome!
thank you I am always watching your video .
You are welcome, and stay tuned for more.
You are a grait teacher........
Thank you!
Thank you for the great help!
You are welcome
Wonderful tutorial as always PJ. I learned many pointers with each tutorial video. Thank you very much. :)
You are welcome BoonKok!
i got what i looking for thq PJ
You are welcome
Thanks! Great lesson!
You are welcome!
At the end of this film, I didn't see the merge(boolean) about the pre-made surface and the tire tread pattern. If I want to 3D print them, shall I boolean them? And at 15:37, the red circle at right-up screen, what did it mean?
If you want to 3D print the model. you need to make sure all the parts are closed polysurface and boolean union it.
Great video PJ! Now I will give this a try. Thank you.
You are welcome, David!
Thank you ❤❤
No problem
Thank you. You teach great.
You are welcome!
THANK YOU ! PJ🙏 very tiring😝...
Very! hahaha...
🤩
perfect, nothing else to add. Thanks
You are welcome, Benjamin.
it was really cool :)
Thanks
excellent tutorial
Thank you!
Scooping pendant making plzzz
Muy excelente. Gracias
You are welcome!
Thank you.
You're welcome!
hi pj I alaways learn some tricks from your vidéo thanks
I try my best to share valuable tricks and tip. I am happy people find the benefit from my video.^_^
It's me again. While I put the tire pattern back onto the circle surface, the tire pattern appeared inside the circle surface. What should I do to reverse them to the right direction? Thank you,.
the is the direction issue. you can click on different corner at target surface
Thank you
You are welcome!
Nice tire
Thanks!
Thank you Very much PJ for this tutorial.
Why did you tapered 1 end of the tyre pattern before transferring it to the ring?
I tapper the thickness. so the middle part will be thicker and both sides will be thinner. that way it will be more comfortable to wear.
@@PJChenJewelryDesign thank you very much PJ keep up the good work. You're awesome
Thank you very much
You are welcome! ^_^
Thank you for your work!
Are you a self-taught in a cad modelling, or you studied it somewhere?
I teach 3D modeling in the college.
Wow pj nice video
Thank you!
HI. Great. I like it.
Thanks.
neat
Thanks
PJ... i really hate that flow along surface command. I never obtain the same results. I did all the sam way as you and at the moment to flow...the Parts flow along the top of the surface of the ring but it continues to inside the ring! It doesn’t flow only on the top of the ring’s surface like yours... :(((
you can try to click other corner on the base surface
老師您好，我遇到的問題是，在點選建立uv curve後，只有出現四分之一的曲面，要如何修正？
if your curve can be exploded. they are not single curve. You can rebuild your curve before sweep. so they will be single surface for Create UV Curve
Great videos. Helped me a lot. Could you do one on making a boxing glove please.
boxing glove! interesting. I will study a little and put it on my video creating list.
這點子真👍！
謝謝，很開心你會喜歡
nies pj
Thanks.