Allen this is a peace of art mate it’s beautiful and it works. Your free hand cutting skills were pretty to watch. It’s people like ya self that put your work up on RUclips make watching RUclips pleasurable. I really like how your always finding ways to improve things its awesome. Keep doing what you love brother!!
Allen, it's guys like you that makes it worthwhile to watch RUclips. Love your work, very soon I'll be trying to make use of your teachings. By the way, I'm from Trinidad.
Wow. You work and dedication is truley amazing. I have been watching your vids non stop for 2 days now taking as many notes as i can. Im doing a refurbish on a old offset smoker.
You could drill small holes in the lid under the flame decoration and rosebud weld them.... to eliminate screws showing from the front, and make the flames fit tighter to the lid.... Great project Allen!
Yes, I have! I guess I was lumping his plasma and oxy cutting together. It's his free handing that impresses me! I have both and need an edge guide for most of my cutting. @@cavemanjoe7972
You my friend are a genius.you have very good skills.i highly recommend you open up a shop and give lessons.down here where I'm from I know a few welders but let me tell you nothing as good as you sir.you do some awesome pits.i would love to buy one of you.
Nice stuff as usual! Do you know about Fireball Tool? check them out,, good stuff for clamping up square... seems pricey at first glance,, but for doing stuff over and over,, you might like it.
love the flames on the grille you did how much do those sale for cause it just awesome your work is great and always fun to watch thanks for what you do
I've subscribed and binge watched a lot of his channel, but have been wondering why he alternates uses between the oxy acetylene torch and plasma cutter?
Yeap I was right ,,another great build,,like how ya make things easy,,no over thinking just put it on and it'll all buff out in the end with great results,,good job brother look forward to the next 1,,take sone time off and dye those grey hairs in ya beard the camera already adds 10 lbs and 5 yrs lmbo
Love your work. Can you make a type of pizza oven? Perhaps convert a rocket stove into one? There has to be more uses for all that heat than just trying bacon or eggs and boiling water. Thank you.
Allen I wrote to you b4 about making one for me and my family the same way I have my own tank I will be making a trip to Texas soon can you get back to me about pricing please.
@@Allensweldingwoodworking thanks for responding! I’m looking at making one out of a 60 gallon tank. I’m not certain on thickness but I’m guessing it’s probably 1/8 thick looks to be pretty think like this one in the video. Didn’t know if it would last long being this thin.
U got some sick fabrication skill
Allen this is a peace of art mate it’s beautiful and it works. Your free hand cutting skills were pretty to watch. It’s people like ya self that put your work up on RUclips make watching RUclips pleasurable. I really like how your always finding ways to improve things its awesome. Keep doing what you love brother!!
Excellent job as always Allen I love your skills and ability
Thanks!
Allen, it's guys like you that makes it worthwhile to watch RUclips. Love your work, very soon I'll be trying to make use of your teachings. By the way, I'm from Trinidad.
WOW! You do amazing metal work. My Grandson has an interest in welding. I'll be sharing your videos with him.
Another great job. I think your idea with the square door and adding the flame cutout really adds to it. Keep up the great videos
I love seeing your work brother, especially when you talk about how to better your builds. Awesome craftsmanship as also, keep the great vids coming.
Wow. You work and dedication is truley amazing. I have been watching your vids non stop for 2 days now taking as many notes as i can. Im doing a refurbish on a old offset smoker.
You could drill small holes in the lid under the flame decoration and rosebud weld them.... to eliminate screws showing from the front, and make the flames fit tighter to the lid.... Great project Allen!
Allen if been doing welding and metal work all my life . I just love watching you !! Aces all the way my friend love it !!!
Great stuff Allen. Enjoy watching your videos.
Great work Allen.
Love your work. You are the best freehander with a torch I've seen on ytube!
You should see him with the oxyacetylene.
Oxyacetylene is the torch.
The other is plasma
@@gloriab9361
They are both called torches. Plasma torch, and oxy torch. Attempting to look know-it-all just makes you a fool.
Yes, I have! I guess I was lumping his plasma and oxy cutting together. It's his free handing that impresses me! I have both and need an edge guide for most of my cutting. @@cavemanjoe7972
Allen that is one sick bbq pit killer job!!!!
Your Awesome my brother!!!God bless you!!!
Loved watching you put that plasma table to use. 🤣 awesome freestyle cutting brother. Your craftsmanship is top notch.
Very nice job, this is my first video of watching you. It takes talent to do what you did.
I like the finished product! Nice job! Keep up the good work!
You got some mad skills..! This will be one kick but air compressor pit when finished. Looking good so far.
Allen That Is Amazing Work Great Job
Nice.........GBYAY. I look forward to all of your videos. Thanks so much for sharing your talent and taking the time to make your videos.
Looks real nice - good job
You just keep getting better and better.... I wish you would ship one to me to Australia lol
It turn out great! I was looking for ideas to build one,Thanks
I would like to see how the doors are squared on a round BBQ pit!
I have a video up on it
I’m about to use my old 60 gallon compressor tank to do this. The bottom rusted out. So I’m thinking I should cut that out and flat plate that end.
Allen your amazing that is a awesome Grill
I am a big fan good work Allen John from ireland
You my friend are a genius.you have very good skills.i highly recommend you open up a shop and give lessons.down here where I'm from I know a few welders but let me tell you nothing as good as you sir.you do some awesome pits.i would love to buy one of you.
Sounds like business is booming! You deserve it.
Man, now you have me thinking about changes I want to make to my smoker.
Really like your work and ideas. Keep up the good work 👍
Beautiful work!
Allen you do awesome work i am new to your site keep up the awesome work!!
Allen...There's an art in you👍
Buddy u make it look so easy. Great job awesome
Beautiful job Allen
Awesome man. Would make a mean little offset.
Sure wish I could use my plasma cutter that good. Good job
Great looking smokers you have there.
Great job Sir never disappoints!!
Allen I like your grill they look good and i would like to have one of your man and God Bless you and your family and keep up the good work man
I have a workshop ready. but I can't work. In Brazil, the professional and undervalue
Great work Allen !!
Great looking pit,,,
Fine job brother!
You got some new tools nice
Superb work. How much is this bbq?
Looks really good WTG...👍👍👏👏👏
Nice stuff as usual! Do you know about Fireball Tool? check them out,, good stuff for clamping up square... seems pricey at first glance,, but for doing stuff over and over,, you might like it.
Thanks, I'll check it out
Great video as always, you're the king.
Did you make the wheels yourself? Awesome work man
Hi Allen do you use stainless expanding metal for the grills ? love your stuff
Nice work brother. Keep up the great work
love the flames on the grille you did how much do those sale for cause it just awesome your work is great and always fun to watch thanks for what you do
I've subscribed and binge watched a lot of his channel, but have been wondering why he alternates uses between the oxy acetylene torch and plasma cutter?
hi Allen could explain what kind of paint you using to spray?
Damn, this is real talent.
Yeap I was right ,,another great build,,like how ya make things easy,,no over thinking just put it on and it'll all buff out in the end with great results,,good job brother look forward to the next 1,,take sone time off and dye those grey hairs in ya beard the camera already adds 10 lbs and 5 yrs lmbo
Really like the orange flames
Beautiful work Allen. What brand or type of paint do you use on your smokers. Temperature type as well.
Nice work! Where do you find the spring handles you use?
Very nice!
Great work bud
Nice job Allen
thanks, brother. God Bless!
impressive as always
Love your work. Can you make a type of pizza oven? Perhaps convert a rocket stove into one? There has to be more uses for all that heat than just trying bacon or eggs and boiling water. Thank you.
Hey Allen as always love your work. How much is the compressor grill??
Nice one Allen!
How much a smoker like this would cost?
Allen what type of paint do you use in your sprayer?
Looks sharp bro, nice job :-)
Looks good Allen
What 3 losers disliked this!!??
Killed it as always hoss. Nicely done.
How much for that one Allen? Great work like always by the way.
Your amazing. I wish I had your skills. Your an American treasure. I always like.
U r a master of your trade
Amazing Job sir.
Well done.
Shit man, you are a beast with the gas and the plasma ;-}
What's your price on your air compressor grills?
Is this your full time gig now
Hey,thanks respect your work,wish you could get Gazzo to bring me one
Good Job... Fantastic
I would love too have 1 his grills👍👍
Allen I wrote to you b4 about making one for me and my family the same way I have my own tank I will be making a trip to Texas soon can you get back to me about pricing please.
Nice man
Awesome
Great!
It’s great man
Can you do a kettle type grill video?
Awesome!
How much for one like that?
What would you charge to make something like this for a customer?
Next one you should take a smaller tank and make it look like a pig.
Where are you located? I'm looking for something 250-500 gallon. I'm in South Carolina
I have an old 275 gallon oil tank that I've been thinking about turning into a BBQ grill... love this guy...
How thick is the material on the tank? What were the dimensions
It’s thin, I don’t remember the dimensions, it’s an air compressor tabk
@@Allensweldingwoodworking thanks for responding! I’m looking at making one out of a 60 gallon tank. I’m not certain on thickness but I’m guessing it’s probably 1/8 thick looks to be pretty think like this one in the video. Didn’t know if it would last long being this thin.
Sweet
Looking Good Sir...🎥🎥🎥🎥🏆🏆🏆🏆
Allen love your work i have a grill that ms and my son did together i would like for u to takea look at it and give me some feed back
Where are you located at?
In Vivian Louisiana