Damn it's done now I would suggest you to remake this video because you didn't mention that you can only run the command when you have 3 maximum drives
I encountered the usual problem with trying to upgrade and watched dozens of uploads, drive compatibility was never mentioned, plus many of the geeks assume their content is viewed by like minded geeks. Your video was outstanding in explanation, guidance and narration. Finally managed. Thank you very much.
Thank you! Built my own PC years ago, wanted to upgrade to Windows 11 but I could not get my PC to meet the minimum requirements. Kept trying to enable secure boot or switch to UEFI but it wasn't working. This fixed it!
This is a great guide, thanks for helping! I ran into an issue after running [mbr2gpt.exe /convert] where command prompt said that it "Failed to update ReAgent.xml...". ReAgent is Windows Recovery Environment which allows you to troubleshoot the PC. To fix this, follow this guide and after switching from legacy boot to UEFI, reboot the PC. Run command prompt as admin and run the command [reagentc /info]. This will tell you if reagent is enabled. If it says enabled you're all set! If it says that it is disabled try running [reagentc /enable] to enable it and follow up with [reagentc /info] to confirm. I hope this helps!
WOW ! I went in to this knowing I had to do a fresh reload. I had no idea at all that YOU could convert a part. without wiping the OS. This worked like charm. THANKS !!!!
TechBase thank you so much . You instructions save me from the eternal Bios loop from hell. It was so easy I didn’t had to go advance on it just click and turn secure boot . Thank you
You absolute beauty! I could kiss you 😘 it works! I added an additional SSD and uefi stopped working, this fixed that and now I can upgrade to Windows 11 when I see fit. Thank you so so much!
Im also getting an around 20-30 more fps in games. This was the case before I installed the new SSD, no idea why it would impact performance so heavily but again thank you 👍
Replace the hard drive and re-install windows and recover your data from a recent backup. The hard drive is toast. But given Windows 11 requirements I would buy a whole new machine with 11th gen CPU in it. so your hard drive will cost about $2000 because of Windows 11!
You can do this. If you have more than 3 primary drives created in your machine you can back up the data on one drive and delete it. Since there is a precondition to have maximum 3 primary drives to do this conversion.
@@kxrannn.g Don't you mean to convert or reformat the drive into GPYT mode? If this person is still using physical spinning rust I would recommend him to switch to an SSD anyways. reformatting a non-SSD to convert the format is not worth the effort. As long as you have a good backup then replacing the drives with an SSD is the best solution.
I got to the bios and the top on the screen says sabertooth x58 bios setup version 1101. When I sent to the boot tab the options were "boot device priority" "hard disk drives" "boot settings configuration" and "security" I don't see a boot mode or anything like that. When I restarted my computer it doesn't fully restart. Please help
My man you are a legend! I was so confused cause i had windows 11 before on the same computer and all of a sudden my pc didn’t met the requirements, thanks a lot
i did all the steps, restarted my pc, i was booted into "reboot and select proper boot device or insert boot media" error i panicked hard, tried rearranging boot order, resetting the bios, nothing worked, out of desperation i plugged in my windows boot drive that i had just in case things happened, "repair windows 10" "continue into windows 10" and it magically fixed lmao gave me a heart attack but it fixed the secure boot error, thanks for the tutorial
I must thank you for this video. Everything worked like you said and even though my Mobo bios menu is a little different I could find the options you mentioned. You have earned a new sub! 🎉 Congrats on this vid!
Hello bro , I'm getting error while doing this that " Disk layout validation failed for disk 0 " what should I do please tell me I'm dping this since 3days but I'm not going solve help me
Every time I get to the command prompt it tells me to sign into the admin account and I do and it tells me the password is incorrect even though I have changed the password and know 100% that it’s correct
Brilliant went through first time sorted thank you , i am 69 years old would advise please talk a little slower to help the old timers thanks again great
Unfortunately I get the mbr2gpt cannot find os partition error when attempting this which is a whole other issue I have to tackle. Why in the world did they make it so difficult to update.
Thanks Brother. I followed the same steps but in my PC had 4 Primary partions. So had to backup data in one partion and remove it in order to do the conversion. Afterthat it worked and currently installing windows 11. Thank you brother. 😇
@@itsmeajit4750 Yes. My local disk is C and I had D, E and F partitions. So in order to do the conversion I had backup to delete one partition (I deleted F). Conversion will not affect for any data.
This video is a timesaver! The instructions online usually tells you to run cmd as admin unlike the safemode version shown in the video. Using the former method I got the "cannot find room for the efi system partition". Solutions to this error involves a lot of complicated and kinda shady tools and I was thinking about just risking a clean install of Win11 on a new drive. However, running cmd on safemode as shown in the video, the error didn't happen and I was able to convert and boot in UEFI mode!! Bravo! Thanks a lot!!
Ever since the changes it seems like I don't have an operating system to boot from now. To make matters worse, it will not install Windows 11. What a fine video this has been, "How to enable your computer useless" should be the title
Thank you so much!, once I enabled the secure boot it’ll get stuck in a loop where I cannot exit the bios. But after following your video it worked, Ty!!!
I did everything my system is top notch but still I can't update it to windows 11 idk what's the issue I checked all the requirements and it's all perfect
You're a saviour!! Thank you so so much for this! I just built my first PC and don't know much about BIOS and the lingo. This video helped me so much. I'm now able to set up windows 11! I appreciate the help!
Was trying to setup everything for Win 11 , changed my C drive to GPT, than i saw i have on D drive boot and on C is system, so i cannot use UEFI secure boot in bios, it almost broke my BIOS, would not load to windows at all, instead was going to BIOS in endless loop, barely able to fix later. What can i do? System partition and boot partition is on different drives.
It didnt work it said some kind of winre and agent failure now i m stuck at the UEFI BIOS OF HP LAPTOP and it doesnt have any other option than hard disk check ups and language
For some unknown reason, mine won't convert... I've tried everything! I don't even have the mbr2gpt.exe in system32 which means it's not in the system at all, and there's no information on how to get it....
Fix: “Disk layout validation failed for disk 0” Error when converting partition to GPT: bit.ly/2Z0Da3T
MiniTool Data Recovery Software: bit.ly/3y5gRen
you best man. worked fine😯😍
What if my MB doesn't support uefi or secure boot? Then what do?
Still not working 😭
I've installed latest version of windows and when I run the command same message appears..
Please help bruh
Damn it's done now I would suggest you to remake this video because you didn't mention that you can only run the command when you have 3 maximum drives
@@maybe6697 hi can you ols explain how you got over the issue? I'm facing the same thing
I encountered the usual problem with trying to upgrade and watched dozens of uploads, drive compatibility was never mentioned, plus many of the geeks assume their content is viewed by like minded geeks. Your video was outstanding in explanation, guidance and narration. Finally managed. Thank you very much.
The fact that a windows user has to go through this shit speaks waves.
I agree. Had to update BIOS for my Asus-card to even allow TPM 2.0 in the first place. Very confusing.
Yeah, if I wanted to run files from a command prompt to mamage the disc format, I would be using Linux.
Yeah it's too bad windows is the only way to go for most people because everytime there's an update chaos ensues 😪
I went crazy trying to solve the Secure Boot issue! This was all I needed!
@@AlmostGrewMyHairhow do you update it ? Im using asus
Thank you for this tutorial. Don't know why the Windows installer can't just do this itself though
They don’t wanna do it for u cuz they want u to buy new computers with win11 preinstalled
@@smite327 that's what I was thinking about.
It worked for me. I almost gave up before I stumbled on your video, you saved me. Thank you
Really helpful. I didn't know you had to convert your partition. Really appreciate the help.
Thank you! Built my own PC years ago, wanted to upgrade to Windows 11 but I could not get my PC to meet the minimum requirements. Kept trying to enable secure boot or switch to UEFI but it wasn't working. This fixed it!
This is the only video I found that actually worked for me! Thank you so much!
This is a great guide, thanks for helping!
I ran into an issue after running [mbr2gpt.exe /convert] where command prompt said that it "Failed to update ReAgent.xml...". ReAgent is Windows Recovery Environment which allows you to troubleshoot the PC.
To fix this, follow this guide and after switching from legacy boot to UEFI, reboot the PC. Run command prompt as admin and run the command [reagentc /info]. This will tell you if reagent is enabled. If it says enabled you're all set! If it says that it is disabled try running [reagentc /enable] to enable it and follow up with [reagentc /info] to confirm. I hope this helps!
Thanks for that information you saved me
@@Elroshado I'm glad I was able to help! 😊
the only video so far that adressed the mbr partition thing, thanks so much!
I just type the command line that's it it worked without changing bios
Just restart after command line is done
Thanks so much for the video
WOW ! I went in to this knowing I had to do a fresh reload. I had no idea at all that YOU could convert a part. without wiping the OS. This worked like charm. THANKS !!!!
Did u use your PC or your Laptop
Could not figure out the problem until I did the mbr2gpt conversion -- finally! Thank you
Man... You're awesome!!
I've searched everywhere, but only your video helped me out. Thanks again bro!
DUDE. I was completely stumped on why my PC wouldn't do secure boot and launch windows, your guide took so much stress away
Man you are great, this is maybe the first time that I follow a guide and it worked good job 👌🏻👌🏻 subscribed and liked
It did help me! In case you guys have a Asus TUF B-550 Plus WiFi ii and were struggling to update to win 11 this is all you need!
TechBase thank you so much . You instructions save me from the eternal Bios loop from hell. It was so easy I didn’t had to go advance on it just click and turn secure boot . Thank you
When i run the command it does few things but after that it says "Disk layout validation failed for disk 0"
Pls help
Same
@@x9_user you fixed?
@@JugandoconTengo3Perros no
Did you fix it I have the same issue
@@S.B.AUTO316 no
You absolute beauty! I could kiss you 😘 it works! I added an additional SSD and uefi stopped working, this fixed that and now I can upgrade to Windows 11 when I see fit. Thank you so so much!
Im also getting an around 20-30 more fps in games. This was the case before I installed the new SSD, no idea why it would impact performance so heavily but again thank you 👍
I just get an error called "cannot find is partitions(s) for disk 0" any Tipps how to fix that? I'm on windows 10
me too got da same thing
@Karan Singh how do I do this
Same
I had this problem for months and years... and you solved it in two minutes for me. thank u so much
It says "disk layout validation failed for disk 0"..What to do plz rply man
Replace the hard drive and re-install windows and recover your data from a recent backup. The hard drive is toast. But given Windows 11 requirements I would buy a whole new machine with 11th gen CPU in it. so your hard drive will cost about $2000 because of Windows 11!
You can do this. If you have more than 3 primary drives created in your machine you can back up the data on one drive and delete it. Since there is a precondition to have maximum 3 primary drives to do this conversion.
@@PWingert1966 what are you talking about lol if you are going to install windows 10 again you can download it in GPT mode 😂
@@kxrannn.g Don't you mean to convert or reformat the drive into GPYT mode? If this person is still using physical spinning rust I would recommend him to switch to an SSD anyways. reformatting a non-SSD to convert the format is not worth the effort. As long as you have a good backup then replacing the drives with an SSD is the best solution.
Same to me
Thank you so much been troubleshooting this for ages. Did this conversion and allowed me to update straight after. Also made my bios less pixelated
I got to the bios and the top on the screen says sabertooth x58 bios setup version 1101. When I sent to the boot tab the options were "boot device priority" "hard disk drives" "boot settings configuration" and "security" I don't see a boot mode or anything like that. When I restarted my computer it doesn't fully restart. Please help
My man you are a legend! I was so confused cause i had windows 11 before on the same computer and all of a sudden my pc didn’t met the requirements, thanks a lot
This Was the missing piece. Solved my issue. Thank you.
i did all the steps, restarted my pc, i was booted into "reboot and select proper boot device or insert boot media" error
i panicked hard, tried rearranging boot order, resetting the bios, nothing worked, out of desperation i plugged in my windows boot drive that i had just in case things happened, "repair windows 10" "continue into windows 10" and it magically fixed lmao
gave me a heart attack but it fixed the secure boot error, thanks for the tutorial
Thanks. This helped. I couldn’t figure this before your help
I almost gave up upgrading to windows 11. Thank you for providing the fix.
Great video 🔥❤️
very helpful 👌
I was Searching for this video for So long ... Finally THANK YOU 😉
my conversion to gpt failed what should i do?
@@ftym6613 use any software don't do it manually if u don't know cmd properly use ease us
You saved my time. After converting to GPT, my secure boot issue gone and added TPM config in RegEdit 100% working
This video is a perfect tutorial, thank you so much! Saved me hours of headaches
I spent the whole Day trying to find a solution. Finally a helpful video. Thanks!☺
Thank you so much man for this. Atleast now I know where to start.
I must thank you for this video. Everything worked like you said and even though my Mobo bios menu is a little different I could find the options you mentioned. You have earned a new sub! 🎉 Congrats on this vid!
Hello bro ,
I'm getting error while doing this that " Disk layout validation failed for disk 0 " what should I do please tell me I'm dping this since 3days but I'm not going solve help me
Hi did you by any chance fix the issue? I’m having the same problem😅 hopefully 2 years later it’s all good
7 months after, still working perfectly.
THIS REALLY HELPED ME OUT! Thank you!
Best tutorial I've seen
.trust me have a AMD A9 ,, All going perfect until the processor ain't , thanks man
Every time I get to the command prompt it tells me to sign into the admin account and I do and it tells me the password is incorrect even though I have changed the password and know 100% that it’s correct
Did you find out how to fix it
@@AkhPacpls did anyone find out how to fix it
@@user-hz5mk8iu5j let me find the link and I’ll send it. Luckily I was able to fix it
I got the same problem
Ill try smt if it works ill tell everyone how to fix it if not yall wont hear from me again 😂
Oh my god that worked. I had very little hope from this video but it actually worked!! Thank you so much
When I type the command into command prompt it does the first couple of actions then says “cannot find is partition(s) for disk 0” any help for this
Same Issue
Same
Same bc we have multiple hard drives and windows aint on disk 0 but on 1 now the question how we convert disk 1
We need to delete one partition.I had delete recovery partition
ruclips.net/video/t0i8hgo1E6A/видео.html
Thank youuuuuuu bro i was so lost on why secure boot wasn’t working and all i had to do was MBR to GPT and instantly worked
thank you SO much^_^ you have no idea how long ive been looking for a video of this❤️
I've watched all videos on how to enable secure boot. All of it is didn't work, you're a lifesaver...♥️♥️♥️♥️♥️🙏
When typing the command it says:
"Disk layout validation failed for disk 1" any solution?
Same
Same here
@KaZuYa gonna backup data and reinstall OS..
When installing it i will change gpt there
That is the only solution i think so..
@KaZuYa I think it because the disk has more than one partition Idk
@@Aadhi555 did it work
Brilliant went through first time sorted thank you , i am 69 years old would advise please talk a little slower to help the old timers thanks again great
Thx man!
It's easy)) and I was already upset, thinking that my Legion Y540-17IRH won't upgrade to win11
It says Disk layout validation failed for disk 1
Have you done it??is there any loss of data or windows file??
Thank you mate! Searched for the problem for more then 2 hrs and i couldnt fix it! Then watched the video and everything worked! Thank you!
will data be safe while converting from mbr to gpt?
Yes, It will. I wondered the same thing but I took the chance and all my data was fine
@@CUPZYY yo thanksss
I followed the steps and it works. Great and Thanks. You might have taken Hours to fix it.
Unfortunately I get the mbr2gpt cannot find os partition error when attempting this which is a whole other issue I have to tackle. Why in the world did they make it so difficult to update.
Hey, have you managed to find a solution? Having a nightmare trying to install windows 11😅
@@Rocky-dx2tg Nope still searching. There really is no easy way around it.
@@TheDrawable is your OS in drive 0 or drive 1? Because I might’ve thought of a solution if it’s in drive 1 like mine is
Hay guys my os i in disk 0 and it trying to convirt disk 1 and saying can't find os partition for disk 1 and the os in disk 0 WTFF
resolved?
Even though this video is nearly 3 years old. It's helped me enable secure boot since I didn't know about converting the partition.
Hi all
When I tried to convert MBR to GPT, I'm getting error like *cannot find room for the EFI system partition"
PLEASE HELP
Thanks! Said after sending command, it said failed, but after health check, it said it was fixed and now I can update to windows 11
Brilliant,been looking everywhere for this fix, thank you so much.
Thanks Brother. I followed the same steps but in my PC had 4 Primary partions. So had to backup data in one partion and remove it in order to do the conversion. Afterthat it worked and currently installing windows 11. Thank you brother. 😇
is your local disk d and e data is also deleted or not
@@itsmeajit4750 Yes. My local disk is C and I had D, E and F partitions. So in order to do the conversion I had backup to delete one partition (I deleted F). Conversion will not affect for any data.
Life saver ❤❤❤
I've been trying to fix this error for months.
Thanks man.
I followed your every step but it says ''disk layout validation failed for disk 0" Please Help
Thank you man. I had no hope of getting this figured out until i seen this video. Thank you again!!!
I finally meet the requirements thanks to this video! 🙌🏾 Thank you! 😊
I watched a bunch of videos. This was the only fix. Big thanks and liked it for you.
Thank you, finally someone made a video. I have a custom build i made and it wasn’t compatible until now after doing this
This video is a timesaver!
The instructions online usually tells you to run cmd as admin unlike the safemode version shown in the video. Using the former method I got the "cannot find room for the efi system partition". Solutions to this error involves a lot of complicated and kinda shady tools and I was thinking about just risking a clean install of Win11 on a new drive.
However, running cmd on safemode as shown in the video, the error didn't happen and I was able to convert and boot in UEFI mode!!
Bravo! Thanks a lot!!
Omg man, great video! You helped me to fix this error it was showing to me. Now I'm able to update to Windows 11 which just arrived to my pc today.
YES! This works! May you live 1000 years sir!
Give this kid a medal 🏅
Only video that worked along with a comment from reddit that helped me complete another step
thanks for your video, this was the last step i needed to update to windows 11
Honestly been trying to figure this out all day and dude you have been an absolute life saver! Thank you!
Great video had to subscribe after following your instructions. Worked like magic...keep up the good work
Thank you so much. I had all but given up on upgrading ever! This worked
Ever since the changes it seems like I don't have an operating system to boot from now. To make matters worse, it will not install Windows 11. What a fine video this has been, "How to enable your computer useless" should be the title
Thank you so much!, once I enabled the secure boot it’ll get stuck in a loop where I cannot exit the bios. But after following your video it worked, Ty!!!
THANK YOU SO MUCH I HAVE BEEN WORKING FOR HOURS AND JUST SAW THIS SIMPLE VIDEO AND SAVED MY LIFE. Did not believe it was so simple!!!!
Bro you are the best, this tutorial was really helpful for me!
BRILLIANT! I needed to do exactly this, thank you very much!
me 2
Thanks bro. My Laptop now can upgrade windows 11 ❤️❤️ this method is working 100% on enabling secure boot. 😍💯
Thanks a lot man finally fixed the issue and this thing really works
Did it really work cuz a lot of people are saying it doesn't work
It really works and no data loss! Thanks!
I did everything my system is top notch but still I can't update it to windows 11 idk what's the issue I checked all the requirements and it's all perfect
I thought it wouldn't work
And I got surprise when it worked
Good job
You're a saviour!! Thank you so so much for this! I just built my first PC and don't know much about BIOS and the lingo. This video helped me so much. I'm now able to set up windows 11! I appreciate the help!
Just what I needed. Thank you so much!
This video cleared my problem. Thank you so much!
My drive is already GPT and my bios is set to UEFI yet secure boot doesn't load. What's wrong?
me too
Great video, nice explanation. Helped a lot! Thank you.
Thanks alot this fixed my problem right away ive been trying to find a solution for 2 days now and this finally helped
broooo it was like a cake walk , thank you soooooo much youre a life saver and i was not able to find the fix of the problem thank you so much
….Not all Hero’s Wear Capes.
This man is a legend…..give ‘em 2 Scooby snacks
This explanation was clear, concise and worked!
Was trying to setup everything for Win 11 , changed my C drive to GPT, than i saw i have on D drive boot and on C is system, so i cannot use UEFI secure boot in bios, it almost broke my BIOS, would not load to windows at all, instead was going to BIOS in endless loop, barely able to fix later. What can i do?
System partition and boot partition is on different drives.
It didnt work it said some kind of winre and agent failure now i m stuck at the UEFI BIOS OF HP LAPTOP and it doesnt have any other option than hard disk check ups and language
Awesome, had that issue with the vanishing hard drive too. Thx!
For some unknown reason, mine won't convert... I've tried everything! I don't even have the mbr2gpt.exe in system32 which means it's not in the system at all, and there's no information on how to get it....
Thank you @TechBased ❤❤❤
This fixed a major issue for upgrading to 12th gen intel thanks
After watching many videos. Yours really works 👍🏻👍🏻👍🏻
Thanks dude! I thought i have to reinstall windows 10 with secure boots enabled. This works!
So you did not lose any data right just making sure because I’m doing this to
@@Aczz afaik no, i didnt lose anything.
Can u tell me how to reinstall windows with secure boot?