Mecha King Kong Kong Assembling Guide | No Fast Forward
HTML-код
- Опубликовано: 24 авг 2024
- This video we will show you how to assemble Mecha King Kong, no fast forward, full tutorial. We used Kingroon KP3S and KP5M 3D printer printed a 200% Mocha King Kong. It takes us one month and 4.9 KG filament.
But we made a mistake on the shoulder parts, please remember to swap left to right. Shoulder parts means the shoulder cover and the part it covers, making sure the screw holes on the back side.
Please remember to use glue, some parts cannot stick together without it.
MECHA KING KONG:
cults3d.com/en...
toymakr3d.com/...
Credit to: TOYMAKR3D
Get KP3S:
www.amazon.com...
www.aliexpress...
www.ebay.com/i...
KP3S Upgrade Collection:
KP3S BASE:cults3d.com/en...
KINGROON Z-AXIS STABILIZER WITH 608:cults3d.com/en...
KP3S TITAN V6 VOLCANO FAN DUCT:cults3d.com/en...
KP3S DRAG CHAIN MOUNTS: cults3d.com/en...
KP3S Y STEPPER MOTOR INSIDE CASE:cults3d.com/en...
Kingroon_KP3S_Spool_Holder:www.thingivers...
We will update more tutorials soon. Please subscribe to our social media channel to get it in the first time:beacons.ai/kingroon3d
Bruh, what did you scale that too? Mines at 100% scale was already hard enough to put together 😂. Bout to start on my Mechagodzilla next
That's totally insane and cool prints I ever watched!
Thanks!
I have seen this in toy maker 3d channel is this the same design
pla? what filament the gray looks good
The struggle was real in this one jeeez lol
Do the Mecha Godzilla pls 🙏🥺
How can I get one? I don't have a 3D printer
Which Filament is the Grey? Silk? Pla or petg?
PLA
Excelente trabajo 👍 cuánto kilos de filamento usaste ?
4.9 kg lo dice en la descripcion
How tall is that sucker at 200 and what size printer?
I'm printing this right now. What scale did you make yours? I'm doing just 100%.
It’s 200%. 100% would fine.
Buen trabajo. Que altura tiene ?
So, are you gluing all these? I was thinking they were friction fit.. also, looks as if the twist screws for the inside of the knees are missing
Mostly, some are friction fit.
What about a 3X?
I think I'm going to look further into your printers also. I think I might get one.
Thanks for your support! Just made a coupon code for you, if you decide to get one from our official website: kingroon.com, it’s “Kingroon”. 10% off. Have a great day!
Very nice, what layer height did you use?
0.2
How long did this take to print at 200% I see u used supports so that takes longer. I completed the model at 100% and it printed without any supports on anything and turned out great.
We use several KP3S and KP5M to print it for about one month. It’s a pity to know that, we use supports, too. Anyway, 100% is the best.
@@Kingroon3DOfficial well of you ever try again or the God zilla one just know that no support needed at all. I have a small RUclips channel I'll upload it if I do it
@@toddcoello6461 Glad to know that! We have got that model for months, and be struggling with its size. So let’s be unfair to make it smaller. LOL We should start the printing soon.
Could it be done on a printer that has a bed size of a ender 3?
Of course you can. We use the KP3S to print some of its parts, its bed size is 180x180mm. But maybe not 200%, some parts requires 300x300mm heat bed. Actually it’s not necessary to print with that size. Normal size would be great. Remember not to add any supports, we made mistake on that😂
Amazing!
Thanks!
Muy bueno!!!!!
Thanks!
Can you list the filament you used?
You can find them on the kingroon.com
I need one 😫
Can you make mecha king ghidorah x
Yeah, it’s coming soon. And we make it 100% this time. Still printing the gray parts.
Are this king ghidorah full mecha
@@robotbiru5547 Sure, it is. It’s a huge one, about 3 kilograms, with four colors. A great cool model from the same author.
There is a mech ghidora version? Can't find it
@@baljazz Here’s it: cults3d.com/en/3d-model/art/atomic-dragon-mecha-godzilla And we are going to assemble one today on our Facebook Group
Up to how many percent can I make ender 3
Up to 150%. But we really recommend to keep it 100%, it’s easier to keep and maintain.
@@Kingroon3DOfficial thanks all no support ?
@@mioliveira9760 No, you still need to decide it based on parts. Some of them requires support.
Can you print it in 75% ?
Sure, actually we wish we didn’t print it in 200%. 100% should be fine. And we are now ready to print the Godzilla, in 100%. Will publish it soon.
Thanks. I printed his jet jaguar in 50% and it was really messed up.
Cant wait for the mechagodzilla
@@gojirafan8316 75% might be too small
@@gojirafan8316 It’s a huge project
what colours is ???
Gray, white, black and orange.
Качество печати конечно так себе.......
By using PrusaSlicer, we have been improved our settings now, it helps us get better prints. Our latest tutorials should be helpful.
@@Kingroon3DOfficial this is a joke?))
@@user-kc9ux8nz7u No, it isn't.
Toymakr3d