@@ricksta5350 no :( You what I ended up bringjng it to a computer repair shop and they said it was because of a virus that's why my pc kept on restarting to the point that it led to corrupt my OS. So they reinstalled/re-programmed it and now it's all good. I paid about $11
The problem was that I was booting the recovery usb normally (just selecting the usb). It is super-duper-EXTRA important that you select boot to the usb UEFI option! Once I did that stuff started working again. To get my SSD back up and running I did the following: boot to UEFI recovery usb launch cmd bootrec /ScanOs (you should find an instance) bootrec /FixMbr bootrec /FixBoot (if you get error, do bootsect /nt60 SYS and try again)
I spent 4 hours looking for help on the web. This is the only one that worked!!! Here's what I did. You need a Windows boot usb, set your bios to boot usb, then follow his prompts, and type the 4 commands into DOS, you must type bootrec /COMMAND Thank you!!!!!!!!!!!!
Solution1 worked for me.. Opened up the desktop case, made sure that there are no loose-connections , particularly the connections from all harddrives/SSDs to motherboard SATA ports . Restarted the PC and voila, it worked .. So friends, before trying recovery with the bootable disk, try this option first ..
didn't work for me, I have the options Press enter to try again Press f1 to enter recovery environment Press f8 for startup settings And Press esc for UEFI firmware settings The only key that's works/brings me anywhere is esc to the bios. All other keys just flash the screen and go back to blue screen, any chance you'd know what to do? Lol
I am stuck in the recovery setting ( the Blue screen that says 0x000000e ) because my computer for some reason doesn't respond to my keyboard ( i tried two keyboards and no matter what key i press, nothing happens) . so i cannot press any of the options to continue. please help
I can't get into my computer to do anything besides the bios which don't work so should I just install the windows if I do this can I do the recovery afterward?
The first three steps didn't work. So I'll have to reinstall windows. But Is it ok to reinstall windows 10 without factory resetting it first?. I heard that directly reinstalling windows 10 before factory reset would make the pc performance slower( although I'm unable boot my pc or reset it because of this annoying blue error screen). I'm just asking if it's ok to directly reinstall windows 10 .
Yea it is ok but u will obviously loose your data …. Option 2 try to connect a new ssd to ur pc and install windows there then from there may be try to access your old data from your corrupted ssd …
@@zemct Been a while but if I remember correctly I installed Windows 10 again via USB to work alongside the faulty windows 10. That was the only way to get the repair options and access to the faulty install . I then downloaded Recoverit and found the files from the faulty install I wanted and used Recoverit to get them and put them on an external hard drive. Took AGES to download. Then I erased and formatted the entire computer back to having just 1 Windows 10 installed.
Can I just buy new fresh components and swap them out? I got my hands on an a Dell 7010 I found at a swap meet for cheap (this not being able to get in was why it was cheap) this keeps popping up after trying everything I cam think of. What hardware can I change to new hardware to get rid of this problem, I know I accidentally erased all the memory on the thing trying to get it to work
@@GavstarLeo When the blue screen appears press the esc button and then F9 and then the esc button again. Your computer will start. Worked for me. (But this is a temporary solution). You'll have to so this always every time you try to boot your computer
Hey, when I try to install windows on my SSD Sata everything works and then when the installation is finished, my pc restart and then I have a black screen with the 0xc000000e error code. And that’s why I’m here So I feel like there is no solution. Can someone help? :)
Idk how we all ended up here but To use CMD from bios,your only hope is to burn the windows iso file and burn it into an USB stick (8gb or higher) Steps : 1)Borrow your friends laptop or a second laptop 2) you need to download windows 10 iso file( 4.4 gb) 3) download rufus software(2mb) And burn the iso file to the Usb stick 4) now you just plug in the usb stick and proceed to install new(?) windows 10. 5) at second step while installing new windows press ( shift + F10) or use repair pc option and select CMD Basically what we doing is...we scanning for any windows files on old drives( the same default disk before your system broke)...if we found any such file, we just resume from there...if not we gotta clean install everything into a different disk so that your files from the broken disk can be recovered!
Thank you for sharing these steps to access the Command Prompt (CMD) from the BIOS and install Windows 10. It's helpful for those who may need to perform such actions. If you have any specific questions or need further assistance related to this process, please feel free to ask, and I'll provide more information as needed.
Good video! Helped to better understanding the problem! Since a week I experience the error code 0xc00000e. Luckily it turned out that after the PC was closed a three times, the problem seemed (self)fixed and everything was oke. But nevertheless a few days later the same happend again. Once I saw it got fixed by automatic repair while I didn't ask for that. But still the problem reoccurred. I have Windows 10 and think about installing Windows 11 to solve it once and for all.
Damm why I dint found out you first had that error on Acer Nitro 5 Reinstalled windows 10 everything went semi-okay but on start, up screen, I have now 5 different windows, and after I have reinstalled windows put drivers, etc.. the same problem appeared again but now took out the SSD driver and put it back that helped. Seems like I have a dead SSD drive soon.
Hello to all and thank you. Did the Win 11 install and it changed the bios. Why? Who knows?! Went into bios and sure enough the boot drive in bios was in the wrong order after the Win 11 install. So remember, before going through media tool, check the BIOS boot order! Prioritize only the boot drive!
This happened when I converted my ssd from gpt to mbr with external program and rebooted my pc Solution? Reinstall windows 10 and via the cmd available during the installation (shift+f10 i think) i reconverted from mbr to gpt and reinstalled windows 10
Hey I have face that same problem ..with this step can you tell me ..any Data lose .....because I don't want to lose my data .....tell me solution .pls
Excellent video!!!. With the arrival of UEFI I forgot MBR, thank you for your help I was able to fix a raid server boot. But... I do not see how the option of reset windows will fit in this video, the boot is damaged there is no access to windows at all. Just curious because I see on microsoft help all the time they showing the option to go to the settings, but how????. The system is not booting up.
Thank you🙏🙏🙏🙏😭😭😭so mufh After cloning my ssd to new SSD this happed. And second solution is working fine to me. Thank you so much🙏🙏🙏🙏🙏😭😭😭😭 I use the cmd method
When typing bootrec /revuildbcd it says it identified 1 window and if I want to add it. Typing the yes prompt just gives me the option again. I NEED HELP PLEASE
Hi there, thank you for your question! Make sure you're running it as an administrator if you are then you can try bootrec /scanos to identify Windows installations and add them to the BCD store, and if that doesn't work, use bootrec /rebuildbcd /A to add the Windows installation automatically without prompts. If the problem persists, you can manually edit the BCD store using the bcdedit command, but exercise caution and back up your BCD store first. If none of these solutions work, consider using Windows recovery options like System Restore or a Windows installation media for further repair.
what am i doing wrong in CMD when i type Bootrec.exe command im getting " it is not recognises as internal or external command, i able to repair the startup error automaticaly by reseting pc keeping files, but then i get the startup error again the next day
Hi there, thank you for your question! If you're encountering the "Bootrec.exe is not recognized as an internal or external command" error in Command Prompt (CMD), it's likely due to the system's inability to locate the Bootrec.exe executable. To resolve this, try providing the full path to Bootrec.exe (usually located in "C:\Windows\System32") or run CMD as an administrator, check for typos, scan for file corruption with "sfc /scannow," consider using Startup Repair from a Windows installation or recovery media, perform a malware scan, address disk errors with "chkdsk C: /f," and keep your Windows system updated as software updates can address underlying issues causing startup errors.
@@RecoveritDataRecoverySoftware i actually reinstalled the window. Lucky me i had windows installed on Ssd and all my data on HDD. So there was no loss of data.
@@omarrawashed5846 it's the DEL key for me. But whenever I press it, it doesn't load and just goes directly to the blue screen. Once in the blue screen, it tells me press ENTER to retry starting or F8 for startup settings. Nothing happens when I select an option :(
Hi there, thank you for your question! Getting Access Denied might indicate insufficient privileges or administrative rights. To resolve this, run Command Prompt as an administrator by right-clicking the shortcut or using the "Run as administrator" option. Alternatively, enable the built-in administrator account or check file and folder permissions to ensure you have the necessary access. If the issue persists, consider using third-party boot repair tools or seek professional assistance.
I do not get repair computer option while trying to boot from USB, it goes straight to User aggreement and then to selecting the drive. I have cleaned my SSD and installed windows, yet still i am getting the error
Hi there, thank you for your question! Have you checked that your USB drive is properly prepared with the necessary repair files. Check your computer's boot order in the BIOS/UEFI settings and make sure the USB drive is listed as the first boot option. If needed, try a different USB port or verify the integrity of the USB drive on another computer. Alternatively, you can access the repair options directly from the Windows installation on your SSD by accessing the advanced startup options.
Nothings helped .. im so damn annoyed this happened after last night windows 11 update and the pc got this error . When trying to launch usb win installation it says something about you allready started an upgrade and started from an installation media... Take out the media and press yes if u want to continue with upgrade
I can normally boot Windows 11, but once i reboot by pressing F11 (HP Sure Recover), only then i'm getting this error message. Should i use this solution?
Hi there, thank you for your question! I'd recommend following all the steps in the video hopefully they solve your issue otherwise try running CHKDSK to scan your drive and make sure everything is fine.
My week old new ssd with win 11 on it is not appearing on bios, other pc or other windows install. I was installing a game and then blue screen appeared with that error 0xc0000009e
Hi there, thank you for your question! Check the cables, update your motherboard drivers, configure SATA settings, or format your SSD. Regarding the blue screen error you encountered, it seems that the error code 0xc0000009e is a Windows error caused by either corruption of the file structure or a physical disconnection of a component in a computer. You can try running a recovery tool or using the command prompt to repair the Boot Configuration Database (BCD).
how do you expect me to access anything from the computer when this error wont let my computer boot up?
Exactly. Having this issue with Win 7 and Can't get to desktop.
Same. You guys know of any resolution?
@@purrpaws7863 did you get my response with the answer? Don't see it anywhere
@@ricksta5350 no :(
You what I ended up bringjng it to a computer repair shop and they said it was because of a virus that's why my pc kept on restarting to the point that it led to corrupt my OS. So they reinstalled/re-programmed it and now it's all good. I paid about $11
did u end up fixing it i just got a new cpu and mother board and this is going on
The problem was that I was booting the recovery usb normally (just selecting the usb). It is super-duper-EXTRA important that you select boot to the usb UEFI option! Once I did that stuff started working again. To get my SSD back up and running I did the following:
boot to UEFI recovery usb
launch cmd
bootrec /ScanOs (you should find an instance)
bootrec /FixMbr
bootrec /FixBoot (if you get error, do bootsect /nt60 SYS and try again)
Ima be honest I don’t understand a single thing he just said
Rebuilding the BCD worked for me. Thanks a lot 🙏
I spent 4 hours looking for help on the web. This is the only one that worked!!! Here's what I did. You need a Windows boot usb, set your bios to boot usb, then follow his prompts, and type the 4 commands into DOS, you must type bootrec /COMMAND
Thank you!!!!!!!!!!!!
Excellent information. Followed the instructions and it worked. Thanks a lot!
Solution1 worked for me.. Opened up the desktop case, made sure that there are no loose-connections , particularly the connections from all harddrives/SSDs to motherboard SATA ports . Restarted the PC and voila, it worked .. So friends, before trying recovery with the bootable disk, try this option first ..
Dudee i triedd
Great video. Did get a kick out of you using an Apple laptop in your stock video clips lol
Thank you for all your help. You are life saver. It fixed my problem.
Thanks for the help, checking all of the connections worked for me
The bios default option worked for me. Thanks so much!!
This guy is in desktop saying things and i cant move from that blue screen,i can only access bios ....
Go into BIOS and check boot drive. It worked for me after a new build. For some reason Win 11 changed the boot. Weird.
When i do /fixboot it says "Access Denied"
same here!
Did u figure it out?
You need to be an administrator
Enter (bootsect /nt60 all)
Then try (bootrec /fixboot)
@@scarmoh Thank you!
Thanks Bro.
For those who can't access cmd from the blue screen. Press shift + F10. Cmd should open... from there you can type the code lines
didn't work for me, I have the options
Press enter to try again
Press f1 to enter recovery environment
Press f8 for startup settings
And
Press esc for UEFI firmware settings
The only key that's works/brings me anywhere is esc to the bios.
All other keys just flash the screen and go back to blue screen, any chance you'd know what to do? Lol
Bro we have the same problem@@tootiredbeats1031
@@tootiredbeats1031ound a solution ?
can i ask after i downloade the windows 10 to an USB drive, what should I do after ? coz you didn't mentioned about it
Thank you a lot this worked for me the deleting the SSD and reinstalling windows the error is now gone I thought my SSD was bricked
I am stuck in the recovery setting ( the Blue screen that says 0x000000e ) because my computer for some reason doesn't respond to my keyboard ( i tried two keyboards and no matter what key i press, nothing happens) . so i cannot press any of the options to continue. please help
Same here, have you been able to find a solution?
Same here any solutions?
I can't get into my computer to do anything besides the bios which don't work so should I just install the windows if I do this can I do the recovery afterward?
Thanks simple and easy to understand instructions
In solution 2, using the command bootrec /fixboot said access denied
The first three steps didn't work. So I'll have to reinstall windows. But Is it ok to reinstall windows 10 without factory resetting it first?. I heard that directly reinstalling windows 10 before factory reset would make the pc performance slower( although I'm unable boot my pc or reset it because of this annoying blue error screen). I'm just asking if it's ok to directly reinstall windows 10 .
Yea it is ok but u will obviously loose your data …. Option 2 try to connect a new ssd to ur pc and install windows there then from there may be try to access your old data from your corrupted ssd …
Yoo bro i recently i change the disk hardware on cmd like diskpart and my pc have this bluescreen now how i can fix it?
bootrec/fixboot, press enter, I get message, ACCESS IS DENIED. Why is this ?
hey did you ever fix it? i’m having this exact problem
@@zemct Been a while but if I remember correctly I installed Windows 10 again via USB to work alongside the faulty windows 10. That was the only way to get the repair options and access to the faulty install . I then downloaded Recoverit and found the files from the faulty install I wanted and used Recoverit to get them and put them on an external hard drive. Took AGES to download. Then I erased and formatted the entire computer back to having just 1 Windows 10 installed.
option one actually worked. I have never seen anyone do it with a successful outcome until now. Thank you!!
It solved the issue for me. Thanks.
thanks For Sharing informative data with us thanks a lot
THis has never happend to me I got a new mic and now it's doing this but if I unplug it still it's doing the same
Can I just buy new fresh components and swap them out? I got my hands on an a Dell 7010 I found at a swap meet for cheap (this not being able to get in was why it was cheap) this keeps popping up after trying everything I cam think of. What hardware can I change to new hardware to get rid of this problem, I know I accidentally erased all the memory on the thing trying to get it to work
so i restored a backup image created by aomei and now i cannot boot into windows and im getting this same error
I went to msconfig and I inselect all of the windows options on my brother’s laptop please I need help
windows usb bootable comes to the rescue! The cmd part of the video helps me really workds
When I type bootrec /fixboot it says access denied
I get access denied too any fix so far? Been going on a mad one
@@GavstarLeo When the blue screen appears press the esc button and then F9 and then the esc button again. Your computer will start. Worked for me. (But this is a temporary solution). You'll have to so this always every time you try to boot your computer
@@sophisophia797 worked for me did you get any permenent solution please help
Bootsect /nt60 all
Same here...
You can also try to disable fast boot from BIOS. That worked with my laptop.
Dudeee thank you so muchhh it really worked
Dudeee thanks! It worked on my laptop too
I had that problem scince I sychronized my HDD with my SSD using BCD solution
How are you supposed to install the software if you can't even get into Windows to see anything on the system drive?
id be interested for more detailed explanation on what causes the problem
Thanks for your help. You are deserve my subscription 🙏 salute to u sir
The fixboot says access denied. 😢😢 im stuck ive tried all other fixes non have worked
Thank u for the solution..man...
hey man quick question, for
solution 2 when i enter bootrec /fixboot it says that access is denied? what do i do when that happens? lol
nevermind, after rebooting it started working again, just wondering if that is still an issue or not?
Thank you very very much … you fix
Mine, fixed when changed boot setting in bio set up from ueif to legacy
I can’t leave the recovery page so I can’t put in the command is there a work around
Hey, when I try to install windows on my SSD Sata everything works and then when the installation is finished, my pc restart and then I have a black screen with the 0xc000000e error code. And that’s why I’m here
So I feel like there is no solution.
Can someone help? :)
Idk how we all ended up here but
To use CMD from bios,your only hope is to burn the windows iso file and burn it into an USB stick (8gb or higher)
Steps :
1)Borrow your friends laptop or a second laptop
2) you need to download windows 10 iso file( 4.4 gb)
3) download rufus software(2mb)
And burn the iso file to the Usb stick
4) now you just plug in the usb stick and proceed to install new(?) windows 10.
5) at second step while installing new windows press ( shift + F10) or use repair pc option and select CMD
Basically what we doing is...we scanning for any windows files on old drives( the same default disk before your system broke)...if we found any such file, we just resume from there...if not we gotta clean install everything into a different disk so that your files from the broken disk can be recovered!
Thank you for sharing these steps to access the Command Prompt (CMD) from the BIOS and install Windows 10. It's helpful for those who may need to perform such actions. If you have any specific questions or need further assistance related to this process, please feel free to ask, and I'll provide more information as needed.
Okay in going to try this hopefully it works ill update if it does i like how u talk face to face keep it up
solution 1. it worked! thank you!
Thank you for all
Good video! Helped to better understanding the problem! Since a week I experience the error code 0xc00000e. Luckily it turned out that after the PC was closed a three times, the problem seemed (self)fixed and everything was oke. But nevertheless a few days later the same happend again. Once I saw it got fixed by automatic repair while I didn't ask for that. But still the problem reoccurred. I have Windows 10 and think about installing Windows 11 to solve it once and for all.
The solution worked for me- enable csm on bios
but I can't get it to boot I have no functionality with keyboard or Mouse
what happens if my pc works fine but when i move my pc or slam or moce my desk and it restarts what should indo
stop slamming your desk?
Damm why I dint found out you first had that error on Acer Nitro 5 Reinstalled windows 10 everything went semi-okay but on start, up screen, I have now 5 different windows, and after I have reinstalled windows put drivers, etc.. the same problem appeared again but now took out the SSD driver and put it back that helped. Seems like I have a dead SSD drive soon.
Hello to all and thank you. Did the Win 11 install and it changed the bios. Why? Who knows?! Went into bios and sure enough the boot drive in bios was in the wrong order after the Win 11 install. So remember, before going through media tool, check the BIOS boot order! Prioritize only the boot drive!
This happened when I converted my ssd from gpt to mbr with external program and rebooted my pc
Solution? Reinstall windows 10 and via the cmd available during the installation (shift+f10 i think) i reconverted from mbr to gpt and reinstalled windows 10
Thanks, I will try! I just turned the computer and and off for an hour untill it managed to turn on normaly by itself lol.... xD
Thankyou Sir, first idea worked for me...
Hey I have face that same problem ..with this step can you tell me ..any Data lose .....because I don't want to lose my data .....tell me solution .pls
Very nice video Sir❤ Thanks 4 it,🎉
Excellent video!!!. With the arrival of UEFI I forgot MBR, thank you for your help I was able to fix a raid server boot. But... I do not see how the option of reset windows will fit in this video, the boot is damaged there is no access to windows at all. Just curious because I see on microsoft help all the time they showing the option to go to the settings, but how????. The system is not booting up.
Same here,, did your laptop recovered
Thanks bro 😍 i will alot helping video
Welcome! Please hit the subscribe button.
can i re-install windows 10?
It worked, thanks a lot.
Welcome! Please hit the subscribe button.
Omg thank you so much brooo my PC work
Glad to hear that! Don't forget to subscribe our channel.
The 3 said startup repair couldn't repair your PC!
What should I do plz help me I'm crying
i just restarted and it fixed it. but should i be concerned that happened?
Thanks a bunch!
Welcome! Please subscribe our channel.
nah my old computer got straight malware
Thank you🙏🙏🙏🙏😭😭😭so mufh
After cloning my ssd to new SSD this happed. And second solution is working fine to me.
Thank you so much🙏🙏🙏🙏🙏😭😭😭😭
I use the cmd method
Thank so much
i need your help i use a ssd enclosure on acer upgrade from 128 to512 the clone work but i have the blue page what do i do
Same here
Did you find the fix?
I miss a lot of classes and works because of this error😭😭
Thank you so mutch i was in very tough situation thank you fro everything
Thank you
When typing bootrec /revuildbcd it says it identified 1 window and if I want to add it. Typing the yes prompt just gives me the option again. I NEED HELP PLEASE
Hi there, thank you for your question! Make sure you're running it as an administrator if you are then you can try bootrec /scanos to identify Windows installations and add them to the BCD store, and if that doesn't work, use bootrec /rebuildbcd /A to add the Windows installation automatically without prompts. If the problem persists, you can manually edit the BCD store using the bcdedit command, but exercise caution and back up your BCD store first. If none of these solutions work, consider using Windows recovery options like System Restore or a Windows installation media for further repair.
I tried the 8 steps non of them worked Can u guys help me ….
Keyboard doesn’t turn on mouse as well. Upon powering on it goes directly to this blue screen
Did u fixed it?
Help i cant get into the advanced and command
My case, fixboot says access denied. Help me
This guy is amazing
Is it thesame cor win 7 ?
what am i doing wrong in CMD when i type Bootrec.exe command im getting " it is not recognises as internal or external command,
i able to repair the startup error automaticaly by reseting pc keeping files,
but then i get the startup error again the next day
Hi there, thank you for your question! If you're encountering the "Bootrec.exe is not recognized as an internal or external command" error in Command Prompt (CMD), it's likely due to the system's inability to locate the Bootrec.exe executable. To resolve this, try providing the full path to Bootrec.exe (usually located in "C:\Windows\System32") or run CMD as an administrator, check for typos, scan for file corruption with "sfc /scannow," consider using Startup Repair from a Windows installation or recovery media, perform a malware scan, address disk errors with "chkdsk C: /f," and keep your Windows system updated as software updates can address underlying issues causing startup errors.
@@RecoveritDataRecoverySoftware i actually reinstalled the window. Lucky me i had windows installed on Ssd and all my data on HDD. So there was no loss of data.
LEGENDDDD THANKS ALOTT
You are so welcome!! Please subscribe our channel.
How to get into system settings
When I click f8 my screen goes black then puts me back to the blue screen
I have I usb but I forgot to add a windows installation media usb:(
My PC doesn't do the windows loading, it jumps ahead to the error and I can only load up the ASUS uefi bios. Any tips?
Did you find a solution ?
You need a bootable disk or usb that contains windows 10.
@@omarrawashed5846 I have a bootable USB but it won't let me go into BIOS. I get this blue screen straight away. :(
@@purrpaws7863 Go on RUclips and find what key lets you access the BIOS menu or you can utilise F12.
@@omarrawashed5846 it's the DEL key for me. But whenever I press it, it doesn't load and just goes directly to the blue screen. Once in the blue screen, it tells me press ENTER to retry starting or F8 for startup settings. Nothing happens when I select an option :(
When I do /fixboot it says access denied...
If you're not the administrator to your PC if you know your administrator contact him hope this helps
I spill some water on my laptop and blue screen appears.i can't do anything you said I can only open UEFI Firmware setting what do I do
Funciona!!!
On the fixboot I get an Access Denied message, what is up with that??
Hi there, thank you for your question! Getting Access Denied might indicate insufficient privileges or administrative rights. To resolve this, run Command Prompt as an administrator by right-clicking the shortcut or using the "Run as administrator" option. Alternatively, enable the built-in administrator account or check file and folder permissions to ensure you have the necessary access. If the issue persists, consider using third-party boot repair tools or seek professional assistance.
What's the meaning of that unstoppable smile? Is our problem a joke to you?
Thanks
I do not get repair computer option while trying to boot from USB, it goes straight to User aggreement and then to selecting the drive. I have cleaned my SSD and installed windows, yet still i am getting the error
Hi there, thank you for your question! Have you checked that your USB drive is properly prepared with the necessary repair files. Check your computer's boot order in the BIOS/UEFI settings and make sure the USB drive is listed as the first boot option. If needed, try a different USB port or verify the integrity of the USB drive on another computer. Alternatively, you can access the repair options directly from the Windows installation on your SSD by accessing the advanced startup options.
Bro wtf i started watching this video and then i checked my laptop and it didnt show any errors its like it fixed itself
ever ran into bootrec /fixboot access denied? I feel like I'm on an episode of punked right now
Nothings helped .. im so damn annoyed this happened after last night windows 11 update and the pc got this error . When trying to launch usb win installation it says something about you allready started an upgrade and started from an installation media... Take out the media and press yes if u want to continue with upgrade
I can normally boot Windows 11, but once i reboot by pressing F11 (HP Sure Recover), only then i'm getting this error message. Should i use this solution?
Hi there, thank you for your question! I'd recommend following all the steps in the video hopefully they solve your issue otherwise try running CHKDSK to scan your drive and make sure everything is fine.
@@RecoveritDataRecoverySoftware I see a different text in the Command prompt. There is no *X:\Sources* there to see. Anyway...
My week old new ssd with win 11 on it is not appearing on bios, other pc or other windows install. I was installing a game and then blue screen appeared with that error 0xc0000009e
Hi there, thank you for your question! Check the cables, update your motherboard drivers, configure SATA settings, or format your SSD. Regarding the blue screen error you encountered, it seems that the error code 0xc0000009e is a Windows error caused by either corruption of the file structure or a physical disconnection of a component in a computer. You can try running a recovery tool or using the command prompt to repair the Boot Configuration Database (BCD).
Thnk u it works