Pro tip: you can use the removable clipper spark thingy and shrink wrapp it to the side of the shell, you also dont have to do the bottom screw thingy for refilling and youst leave it original, for the wick chimney anything hollow whit a thread will work as long as you can attach one/two nuts [one if its a screw of sorts] and for the cower anything that can thread on and doesnt have a hole on the end will work
Brilliant looking lighter, I love it, thank-you for showing us, but I can't quite work out how you screwed in the fuel filler screw? Did you just tap a nut into it? Thank-you
Cheers. The wick is inside a Shrader valve - the same that’s in a true tube. All I did to hold this in place in the top of the shotgun shell is to add a couple nuts, one on the top and one on the bottom. You can then use the cap from the valve as a cover for the wick. Hope this is what you mean. If not, check out the link to my instructables page which will take you through the build.
Hello sir, what materials you used to join all the parts together. Are they soldering wick and what those jelly type thing you used before applying heat torch ?
Grab the almost clear one to reveal fluid level there guy. Bye the way love your work. Also try a lantern igniter so fingers are nowhere near the fire 🔥. The seal needs to be on both sides of shell butt. You know inside before washer and outside before washer. As squash seal like ice chest drain hole 🕳.
don't think it'll work very well using the clear shotgun shell. You have to jam cotton inside of the shell so won't know if it is full or not. Plus I have done an updated version of this build where I add some copper tube inside the shell and have better seals inside. See below: ruclips.net/video/aqLKyPgy8Vk/видео.html
@@lonesoulsurfer That's of course a pretty good assessment. But you don't necessarily have to fill the intier shell with cotton or wading. You could simply put it in the top and the fluid can reach it as it moves around in the pocket. And of course the wick is also a form of conviance to the fire.
BRILLIANT!! How did you make the striker tube???? Ive been wanting to do something like this, I have a key chain pill holder that is waiting to transform… I just need some tips On how to make the flint and roller striker tube!!! If you could respond back with some ideas that would be great! Thank you brother!!
howdy you can actually just buy the spark wheel section all in one piece. check out the instructable link in the description for more details and a how to. good luck with the build
How did you stick the bottom on there and make it stay did you glue it all I saw you do was stick it on it won't just stay on there lighter fluid will leak out of it out of the bottom you had to glued it what did you use
If you heat up the bottom section with a small blow torch it will melt the plastic inside the shell. You can then push the nut sert inside whist the plastic is soft and it will make a seal around the nut sert when it drys and sets hard.
There's a link to my Instructables page where you can find a step by step guide. I have also made another version which is even better! there is a link to this as well in the description. The rope is called sash rope and is 100% cotton. You can get it from hardware stores or eBay
@@lonesoulsurfer I meant to say 20mm for lots of fluid capacity and the 12gauge round can slide down inside of a 20mm in case anyone's interested it's a fairly decent round!!!!
The only reason that this might happen is you are not getting the shell hot enough. You need to heat both the sparkwheel and the shell with a small blow torch. Also, don't forget to add flux to both
С латунной гильзы,думаю,по надёжной будет,смущает это пластиковое соединение,так то,класс получилось, и бензин надолго сохраняется в баллончике,когда все герметично,нет испарения топлива,как в ZIPPO зажигалке которой хватает на пару дне заправки.
На самом деле я сделал обновленную версию этого, которую вы можете найти по ссылке ниже. Я использовал медную трубку внутри корпуса, что значительно улучшает зажигалку. ruclips.net/video/aqLKyPgy8Vk/видео.html
Amazing lighter,true art.Beautiful hand made jewelry.
Pro tip: you can use the removable clipper spark thingy and shrink wrapp it to the side of the shell, you also dont have to do the bottom screw thingy for refilling and youst leave it original, for the wick chimney anything hollow whit a thread will work as long as you can attach one/two nuts [one if its a screw of sorts] and for the cower anything that can thread on and doesnt have a hole on the end will work
... молодец парень, отличная получилась зажигалка, сам давно хотел сделать себе такую-же!!!
Спасибо большое! очень рад тому, как это получилось. Я сделал более новую версию, которая еще лучше! вы можете найти на моем ютуб канале
@@lonesoulsurfer hola
Thanks for the idea ! I made a similar one but used a steel tube for the body of the lighter
I think I would use a bronze or brass tube instead for my lighter if I make one
That’s pretty dang nifty. Thanks.
Work of art 👍
Cheers!
What kind of blowtorch thing is that? I would like to buy one
Using one of these to light my pipe would be a dream!
Very cool guy!!! Excellent!
you really a kind person dear i like your way of work... SUBSCRIBED...👍👍👍
Absolutely love this, wish I could buy one from you!!
0
I'm looking to make a few over the next couple of weeks. I'll let you know when I do
Sounds good thanks
Pretty cool and amazing
Cool video mate! I like your style 👍
i got one of those i just stuff a round lighter into the shell i got a bunch of them way simpler but gotta say yours is cooler
Cheers man
Brilliant looking lighter, I love it, thank-you for showing us, but I can't quite work out how you screwed in the fuel filler screw? Did you just tap a nut into it? Thank-you
Cheers. The wick is inside a Shrader valve - the same that’s in a true tube. All I did to hold this in place in the top of the shotgun shell is to add a couple nuts, one on the top and one on the bottom. You can then use the cap from the valve as a cover for the wick. Hope this is what you mean. If not, check out the link to my instructables page which will take you through the build.
I believe he used a threaded rivet in the bottom of the lighter, or something similar.
I would like to buy as a gift for my staff.... that is so nice ..... can I buy from you ?
Sorry for the delayed reply. I’ve actually made a few now and they are available to buy at my Etsy shop.
Shop name - VintageVoyeurist
Классные получились зажигалки!!! 👏👏👏
Very cool & interesting video
next video: make a shotgun shel out of a lighter
I’d love to have a light blue and a dark blue lighter made.
Get in touch with me.
I’d try to make my own but I’m missing some of those tools.
I've got a few available now if you are still interested. check out the link to my esty shop in the description
Başarılarının devamını bekliyorum kardeşim
Very cool! Please, what solder do you use? tin?
Can you make one out of a brass ww1 shotgun shell❓️
Yeah definitely! I didn’t know these existed until recently. You can actually buy the brass shotgun shells if you want to as well
Hello sir, what materials you used to join all the parts together.
Are they soldering wick and what those jelly type thing you used before applying heat torch ?
Where do you get the Flint tube/starter component?
www.ebay.com.au/itm/383285390919
You might be able to find them
Cheaper - just have a search on eBay
Amazon sells them for $9 a piece
Does anyone else see the irony of having to use a Bic lighter to light the torch?
Good job
Отличная работа , но попробуйте сделать цепочку на колпачка.
Cool video! 🍻👍😁
Donde consigues la piedra para hacer la chispa
Grab the almost clear one to reveal fluid level there guy. Bye the way love your work. Also try a lantern igniter so fingers are nowhere near the fire 🔥. The seal needs to be on both sides of shell butt. You know inside before washer and outside before washer. As squash seal like ice chest drain hole 🕳.
don't think it'll work very well using the clear shotgun shell. You have to jam cotton inside of the shell so won't know if it is full or not. Plus I have done an updated version of this build where I add some copper tube inside the shell and have better seals inside. See below:
ruclips.net/video/aqLKyPgy8Vk/видео.html
Там вата,там не видно уровень жидкости
@@lonesoulsurfer That's of course a pretty good assessment.
But you don't necessarily have to fill the intier shell with cotton or wading. You could simply put it in the top and the fluid can reach it as it moves around in the pocket. And of course the wick is also a form of conviance to the fire.
Excelente video gracias
Seria posible que me vendas 1 yesquero de esos amigo ? me pareció estupendo su trabajo. saludos desde vnzla. Tienes un nuevo suscriptor.
Hola
Tengo un par a la venta. Hay un enlace en la descripción a mi página de esty
BRILLIANT!! How did you make the striker tube???? Ive been wanting to do something like this, I have a key chain pill holder that is waiting to transform… I just need some tips On how to make the flint and roller striker tube!!! If you could respond back with some ideas that would be great! Thank you brother!!
howdy
you can actually just buy the spark wheel section all in one piece. check out the instructable link in the description for more details and a how to.
good luck with the build
Muito bom!Parabéns!
muito obrigado!
Stupendo oggetto D.I.Y.
Fissa il tappo ad una catenella
Learned a few things. 8:50 is removing Nickle coating?
Actually you are adding a copper coating.
Gut gemacht
I buy this lighter today. How thick is the wick 4mm?
Its 5mm I believe. 4mm will also work
got a light?
BOOM
That's simply wonderful,pity, I gave up smoking.
Did the lighter fluid melt the plastic on the shell at all? Like gas in a tupperwear.
nope - no issues at all with the lighter fluid.
Can I just buy one from you?
Привет из Росси!
привет из Австралии
How did you stick the bottom on there and make it stay did you glue it all I saw you do was stick it on it won't just stay on there lighter fluid will leak out of it out of the bottom you had to glued it what did you use
If you heat up the bottom section with a small blow torch it will melt the plastic inside the shell. You can then push the nut sert inside whist the plastic is soft and it will make a seal around the nut sert when it drys and sets hard.
what kind of wick it is? what is it made of? shoe ties and nichrome wire? i dont understand, how do i make it
There's a link to my Instructables page where you can find a step by step guide. I have also made another version which is even better! there is a link to this as well in the description.
The rope is called sash rope and is 100% cotton. You can get it from hardware stores or eBay
Couldn’t you just braze the shader to the shell casing?
здорово.где кресало для кремния приобретал?
How're there only 2 comments(3, including me), and only 8 likes?! This is f*ckin' cool!
Haha - thanks bro. Spread the love
Copperhead don’t swear
So it cant stand on the table ?
wouldn't the lighter fluid melt the plastic over the long term?
Haven't had any issues with the fuel affecting the shell at all
@@lonesoulsurfer thanks
I’d buy this
я не понял, зачем надо было городить огород с вкручиванием ниппеля, если его можно было просто впаять
это норма
what diameter Cotton braided rope?
5mm
An explanation would be nice.
10:20 it can be solder
Where do you get the lighter parts? Thanks..
There’s a link to my instructables page which has all the parts required
Dude I need a parts list please
check the link in the description- it will take you to my Instructables page which includes a parts list
Please do the 50 B.M.G again or was that you?
Nah - not me
@@lonesoulsurfer I meant to say 20mm for lots of fluid capacity and the 12gauge round can slide down inside of a 20mm in case anyone's interested it's a fairly decent round!!!!
NICE...👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
Hermoso trabajo. Lo felicito.
Can i buy 1 ligther from you?plis
Looking to make a few after Easter and will let you know where you can buy them from once done
Looks fragile.
In addition, there are 12 gauge brass cartridges.
Just like Metro 2033!
Клево👍👌🖐
Can I buy the black one from you?
Looking to make a few after Easter and will let you know where you can buy from once done
Okay, im making one
👍 неплохо, но колпачёк можно на цепочку посадить, а то потеряется.
ага - это хорошая идея! Я делал это в предыдущих сборках
I can’t get the striker to solder to the shotshell bottom!
The only reason that this might happen is you are not getting the shell hot enough. You need to heat both the sparkwheel and the shell with a small blow torch. Also, don't forget to add flux to both
where did u find that part that lights up?
if you mean the sparkwheel then just type 'spark wheel fire lighter' into eBay
@@lonesoulsurfer ok
Из чего сделана стойка для кресала?
Me coming year later to say, thats cool!
Устройство горелки покажите пожалуйста?
С латунной гильзы,думаю,по надёжной будет,смущает это пластиковое соединение,так то,класс получилось, и бензин надолго сохраняется в баллончике,когда все герметично,нет испарения топлива,как в ZIPPO зажигалке которой хватает на пару дне заправки.
На самом деле я сделал обновленную версию этого, которую вы можете найти по ссылке ниже. Я использовал медную трубку внутри корпуса, что значительно улучшает зажигалку.
ruclips.net/video/aqLKyPgy8Vk/видео.html
Hola por cuanto eses uno de esos en sendedores
4:16 Where can I buy it? I don't find it anywhere...
Go to eBay and type in "Spark Wheel Fire Starter"
@@lonesoulsurfer Thank you very much
Super
Next video: How to make an EDC, mini lighter from spent 9mm brass.
challenge accepted
Look forward to the video.
Cheers m8
How much
Where did you bought thesse? 0:32
If you mean the sparkwheel fire lighter, then just type into eBay 'sparkwheel fire lighter' and it will pop up
Bo I need a parts list
I've added a link in the description
Shotgun shells, spark wheels, flint, wick, lighter fuel, acid flux, silver solder, and a few tools
@@entity9742 what tools needed be precise of what the tools are some people have never seen a hole punch before.
Write down what you see while you're watching the video Don't be a dork
10:09 What?
Haha - I have no idea! I was going to put some music over the clip but didn’t bother. Maybe I should...
Jeezus!! I'm awake. I'm. Awake. What?
Cool))) 👍👍👍👍
Birini bana yollar mısın, çok hoşuma gitti... :)
U still make these
I was selling them on etsy but not at the moment sorry
👍
Спасибо! Своеобразная зажигалка. Надо себе такую сделать. Только фитиль потоньше возьму наверно.
Добрый вечер. Нет наоборот надо фитиль толще ставить. Я пробовал делать, результат отличный. 👍
И корпус сделал из двух латунных гильз 12 -го калибра. Получилось.👍
@@РусланЧурилов-у6э Спасибо! Как выходной будет, попробую.
@@РусланЧурилов-у6э да, я тоже так хочу сделать, а то пластмасса и есть пластмасса.
определенно рекомендую более толстый фитиль. Просто убедитесь, что у вас не слишком сильно торчит верх, иначе пламя будет слишком высоким.
Mim vende um desse aí amigo 🇧🇷
👍🖐
У меня нет некоторых деталей, сколько стоит такая зажигалка
it’s probably about $10 US dollars at the most. if you can get the shells for free then even less
Where do I get the hardware?
There’s a link in the description which will take you to a step by step guide. This includes a list of parts
Ich will auch eins davon BITTE.
Ich mache ein paar nach Ostern und werde Sie wissen lassen, wenn ich sie zur Verfügung habe.
Prost
im sure dat sells good
Muito criativo rapaz
👍👍👍👍👏👏
😃😃
Чё только с одной стороны припаял то?
🤯👏👍
Who can make a SpaceX lighter?
Идея 👍вот только вонять будет в кармане ( соединение пластика и верхнего фланца не герметизировано) 👎
Не будет вонять,если руки из плеч.
Now Pocket lighters cost $0.20 each !!!