You say it like it is mandatory to upload a video every other day. Some of us have a life, you know. I mean, life outside the web that is, does it ring a bell?
@@johnphilippatos no I didn't say it in a way that it's mandatory to upload daily, I said it sarcastically. Some of us love his work and want to see more of it so🤷🏻♂️
@@epicflicks7657 Ok, got it. But you've got to admit, it's quite easy to misinterpret your words the way you wrote them, especially when English ain't someone's mother tongue. Take care.
Ah, yes another video that proves to me that my time having to file on a metal piece for four weeks, could actually help me accomplish awesome creations... if I would actually do something with it... It truly looks amazing!
Дорогой Брат, бесподобная получилась зажигалка!!! Очень красивая и стильная!!! Зиппа просто нервно курит в сторонке!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
Давно не было новинок и первые десять минут немного офигел от ЧПУ. Зато потом опять старая добрая пайка, сборка и наведение лоска. И в результате отличная вещь.
Welcome back Roman! 🎉 I can’t believe that this video didn’t show up in my feed. You crossed my mind so I decided to check & wow what a surprise. I hope that you’re feeling great. Nuff love & respect from 🇯🇲 👊🏾
Ça fait vraiment plaisir de vous revoir sur RUclips ! J'espère que vous allez recommencer à poster des vidéos régulièrement comme autrefois ! Avez-vous une boutique dans Athènes ? Continuez vous à faire vos horloges steampunks de folie ? Bon retour sur RUclips.
I think you are using too strong a solution or keeping the part in the solution for too long. You also need to understand what you are using chemical cleaning of brass for. If you are doing this to patina later, then fine, but if you want the part to shine and keep its shine for a long time, then chemical cleaning is not suitable for this, rather, on the contrary, the part will darken very quickly. To make the part shine for a long time, you need to use polishing pastes with wax additives or, after polishing, paint the brass with a transparent two-component automotive varnish.
@@BanjoShow In some of your videos, you see bubbles rise very quickly. Shine is not needed, I just want it uniform and look "all the same" like yours :p I see lots of bubbles and then it looks all clean and matt.
Hello sir, what materials you used to join all the parts together. Are they soldering wick and what those jelly type thing you used before applying heat torch ?
I would not say that this machine is small, since it takes up a decent place in my workshop, but when compared with industrial scale machines, then yes, compared to machines in production, this is a very small machine. Machine model: EMCO 120
8:35 so you don't mess the face of the plate, you should clearn it up with a tool path and glue a plexiglass sheet on top, with all the holes needed, that itself then gets zeroed out. If you get a thicker piece like say 8 mm thick, that's gonna last you a long time, and plexiglass is very stable. Two part contact cement is good, because heat will release it super easy once you've chewed through. IMO, the height loss is negligible compared to having to eventually replace the plate, plexi is cheaper.
@my mechanic..... I really don't know how many followers you have from India but I am a die hard fan of your work. I have never seen anyone to make a perfect product ever in my life... I tried to buy one of your lighter however unfortunately I am from a really poor family and I don't have that much financial support that I can purchase it. If there is any other way available ilto buy it please let me know...I really want to have it
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Missing so much time! Great seeing your creations again
Thank you!
Bro finally remembered he has a channel
You say it like it is mandatory to upload a video every other day. Some of us have a life, you know. I mean, life outside the web that is, does it ring a bell?
I understand you, but unfortunately not everything depends on me. Thanks for waiting.
@@johnphilippatos no I didn't say it in a way that it's mandatory to upload daily, I said it sarcastically. Some of us love his work and want to see more of it so🤷🏻♂️
@@BanjoShow Άστον μωρέ, ένας ένας απαιτητικός, λες και το πληρώνει το RUclips από την τσέπη του....
@@epicflicks7657 Ok, got it. But you've got to admit, it's quite easy to misinterpret your words the way you wrote them, especially when English ain't someone's mother tongue. Take care.
It’s good to see you back online! Amazing lighter!
Благодарю за творчество,и классный контент!!!
Зажигалка огонь)
Жаль что в последнее время так мало новых видео на канале(
Привет с Харькова!
Good to see him again making new videos
Ah, yes another video that proves to me that my time having to file on a metal piece for four weeks, could actually help me accomplish awesome creations... if I would actually do something with it...
It truly looks amazing!
Hey, nice to see you back with yet another amazing project. Hope all is well with you and yours.
You are gifted!!! You did the impossible!
Oh my. Nice equipment upgrades!
Beautiful work. Good to see your channel again.
Дорогой Брат, бесподобная получилась зажигалка!!! Очень красивая и стильная!!! Зиппа просто нервно курит в сторонке!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
Убери из комментов трёхцветную тряпку, ничтожество!
Wonderful to see your work again!
It's good to have you back!
Stunning lighter, dude! Truly amazing work!!! 😃
Stay safe there with your family! 🖖😊
Давно не было новинок и первые десять минут немного офигел от ЧПУ. Зато потом опять старая добрая пайка, сборка и наведение лоска. И в результате отличная вещь.
Much better than a Zipo 😎 AWESOME!
Thank you!
Love this project! And as always, I so enjoy your videos!!!
Прекрасная работа, респект.
What a job ! What a patience ! Awesome project @Banjoshow as always !
Thank you!
Awesome to have you back, we missed you
Welcome back Roman! 🎉 I can’t believe that this video didn’t show up in my feed. You crossed my mind so I decided to check & wow what a surprise. I hope that you’re feeling great. Nuff love & respect from 🇯🇲 👊🏾
Thank you bro!
Красота,как и всегда 👍😃
La espera valio la pena, excelente trabajo. Un gusto tenerte de vuelta.
I miss your videos, thank you!!!
Thank you too
love steampunk!!!
more videos ❤
Ah, he is back 😭😭😭missed you so much
welcome back, missed your projects, this looks awesome!
Thanks!
Impressive, you are a genius 👏👏👏👏
That is a master piece.
Un encendedor precioso gran trabajo, magnifico.
What a beauty !
Welcome back!!
Ça fait vraiment plaisir de vous revoir sur RUclips !
J'espère que vous allez recommencer à poster des vidéos régulièrement comme autrefois !
Avez-vous une boutique dans Athènes ?
Continuez vous à faire vos horloges steampunks de folie ?
Bon retour sur RUclips.
Yeah finaly he is back
Good to see you back
Looks fantastic. You have quite an impressive looking lathe.
Very cool... Looking forward!
This is beautiful
Very cool design, looks great!
Absolutely amazing work!!!
I tried copperchloride for cleaning brass parts, but it turns the surface to copper. Any advice?
I think you are using too strong a solution or keeping the part in the solution for too long. You also need to understand what you are using chemical cleaning of brass for. If you are doing this to patina later, then fine, but if you want the part to shine and keep its shine for a long time, then chemical cleaning is not suitable for this, rather, on the contrary, the part will darken very quickly. To make the part shine for a long time, you need to use polishing pastes with wax additives or, after polishing, paint the brass with a transparent two-component automotive varnish.
@@BanjoShow In some of your videos, you see bubbles rise very quickly. Shine is not needed, I just want it uniform and look "all the same" like yours :p I see lots of bubbles and then it looks all clean and matt.
Oh yeah. I need to make this.
A masterpiece of art 👍
Обалденная зажига.
Glad to see the show back, sad its all CNC now.
Super de revoir tes créations👍🏻👍🏻
Great project mate!
That was amazing.
So good to see you again ! Amazing job !!!
Thank you.
Awesome!
Супер! С возвращением!
Ну наконец то дождались))
Very impressive
Beautiful Beautiful 😍😍
Welcome back. Had been waiting....
Very cool!
I'm thinking of starting to smoke again just to get a lighter, great work.
Bravo. Such a great work.👍👍
Welcome back!
Love Steampunk
We missed you! 🥰🤩
Sehr geiles Video! Danke dafür❤
Наконец то появился...с возвращением...
Great to see you back and this creation is super cool.
Nice work buddy 👌👍🏽🏅
Thank you.
MUY BUEN TRABAJO (CON ESE TORNO NADA PUEDE SALIR MAL . . .)
Доброго дня! Дякую за цікаве відео!
І вам дякую!
Thanks banjo!
Thank you too.
Você voltou a 🎉trabalhar 🎉🎉 Brazil
What was the liquid bath that aged the brass?
Шикарно!!!
Another nice project, thank you for new video, it was long time 😎👍
thank God he has a spare time to make this video.
Yep, thank you!
Welcome back 🙌
Hello sir, what materials you used to join all the parts together.
Are they soldering wick and what those jelly type thing you used before applying heat torch ?
Я думал ты нас бросил)) не пропадай надолго!
Nice!
Sweet!
😀 content de vous revoir, et beau travail comme d'habitude 👍👌
Thank you.
What is this cnc machine you are using? Looks mini...
I would not say that this machine is small, since it takes up a decent place in my workshop, but when compared with industrial scale machines, then yes, compared to machines in production, this is a very small machine. Machine model: EMCO 120
he is BAAAAAAAAACK !!!!!!
Wow..now you have to teach it to make you breakfast !
hola el video está muy bueno Excelente:
🤜🤛👍👊💪👌
thx god... a new video🎉🎉🎉
Amazing design! I see the o ring on the fuel cap, is there one on the snuffer cap as well?
How long does it hold fuel when not in use?
8:35 so you don't mess the face of the plate, you should clearn it up with a tool path and glue a plexiglass sheet on top, with all the holes needed, that itself then gets zeroed out. If you get a thicker piece like say 8 mm thick, that's gonna last you a long time, and plexiglass is very stable. Two part contact cement is good, because heat will release it super easy once you've chewed through. IMO, the height loss is negligible compared to having to eventually replace the plate, plexi is cheaper.
Thank you!
You and Chris over at clickspring should collaborate on a build!
I would like see steampunk absinthe fontain
Sir this lighter how many cost
Please 🙏🏻 tell me ❤
bạn có bán chiếc bật lửa này không?
Өте керемет шыққан өнерін мықты екен
i would really like to have/buy/see a steampunk vape...
that would be awesome...
in my case... i love my Geekvape Aegis Legend😉
구매가능할까요
Finally, new video! Awesome job, as usual! You start using CNC lathe?
Yes, I'm still studying it. Thanks.
nice
7:42 heh, so i'm not the only one who uses old apple boxes to store scraps. :))
Wiedziałem że warto subskrybować i czekać :-)
@my mechanic..... I really don't know how many followers you have from India but I am a die hard fan of your work. I have never seen anyone to make a perfect product ever in my life... I tried to buy one of your lighter however unfortunately I am from a really poor family and I don't have that much financial support that I can purchase it. If there is any other way available ilto buy it please let me know...I really want to have it
Why not cut the metal at the 1 minute mark insead of grinding all the useable material away?
Do you sell these ?
Hello. Yes, of course the link is in the description of the video.