Arduino Plasma THC make by P.Veeramani, it design by Pham Duy Anh
HTML-код
- Опубликовано: 7 ноя 2020
- Đây là một video clip được chia sẻ từ một người bạn có tên là P.Veeramani ở Ấn Độ.
Bạn ấy đã thực hiện dự án #ArduinoTHC #Plasma #THC theo chia sẽ từ trang GitHub của tôi - #CKDtest (link bên dưới) và đã bước đầu thành công.
Firmware được lập trình với C++ và #Arduino IDE
github.com/PhamDuyAnh/Arduino... - Наука
Great THC!!! help, some sketches in your github repo are made separately (_eprom, _encoder, _encoder, _THC, _LCD). Is the file needed to be split into several tabs, or how do you upload it?
what components does a high voltage panel consist of?
hi friends, can you tell me how do you solve the interference from the plasma inverter that interferes with your thc??
Sir I saw your 50:1 divider board in that red colour component value in need sir ,, I tried to make divider but it's not give better result , so I need that component value
I will try this thc , I try my best to do this ,,
I download files, open with arduino, shows six tabs: _encoder, Arduino_THC_rotary, _eeprom, _lcd, _thc, _timer. When I try to Verify/Compile, show error 'encoderPinA' was not declared in this scope. What is problem?
Where is the output from thc connected to?
Hi! This solution doesn't work for me. Analog input floats. Neither capacitors nor resistors help. The cables are shielded. What could be the problem?
I'm struggling with same problems, emi is killing the Arduino i tried another circuit with emi filters but no luck so far
ha tudsz segíteni egy olyan videó elkészítésében, amely megmutatja, hogyan hajtottad végre a konfigurációt a mach3-on, ez sokat segít, nagyon hálás leszek
Amigo tu lograste obtener los códigos de programación?
Great work ...can u share schematic information
github.com/PhamDuyAnh/Arduino_Plasma_THC
You upload the image name is ,, THC voltage divider 2.jpg
This image red colour component value I need sir
Hi! Which "ino" file to upload to arduino Uno, because I see some files on Github. Or how to link them to a file? Thanks for the help!
Hi! It's a project, each file has its own function (like a library, files with the prefix "_"). When you open the main file (Arduino_THC_xxx) with the Arduino IDE, the other files are opened.
@@CKDDT hi ,where we put other files if we use a just main sketch ?
Need to make one but don’t understand nothing
может сделаете видео подробно с деталями сборки . с деталями подключения и настройкой . если конечно найдете время и желание ))))
I can make a video in detail with assembly parts. with connection details and configuration. unless of course find the time and inclination))))
'L1, L2 = LBC15" what part does anyone know?
Hello friend, you connect directly from divider voltaje output to arduino ?
Yes! I used LRC filter. With hypertherm powermax plasma, voltage devider is good.
@@CKDDT me too used it filtŕe but I have noise, what distance put your thc between plasma?
привет сможете схему подсоединение контроллера высоты (Arduino) и соединение с контроллером управления мач3 как осуществляется ? или на драйвер оси z на прямую нужно подсоединять.
hi can height controller connection diagram (arduino) and the connection to the controller as a control mach3 done? or z-axis driver direct need to connect
THC send a signal up/down to Mach3. Mach3 control Z up/down.
@@mkgreenorg4368 я вам нарисую схему свою и покажу, как я понял . а можно сделать автономное управление через флешку ?
I will draw a diagram of their own and will show you how I got it. and it is possible to make a stand-alone operation via a USB flash drive?
Aha! Mach3 control via USB port not support THC. It only use LPT port.
Áp dụng cho hàn TIG được không anh?
Mình chưa có thử. Nhưng tig với plasma nó giống nhau khối nguồn, đều có pilot arc. Mà tig DC thôi nhe.
Your friend in india his name look like an indian name
Yes! All right
@@CKDDT I tried my best , I unable to understand schematic diagram because I have no knowledge in that sorry ,, if you have pcb layout send me I can solder the ic in pcb , sorry friend ,
If you have idea to send PCB
The project was a long time, all the data I have save. They are all in my github.
Video, is that of Indian friend, he shared for me.
@@CKDDT iam also from India , @Tamil Nadu
You can contact him!
vstveeramani@gmail.com