North Box 6XL V2 Assembly Video
HTML-код
- Опубликовано: 11 окт 2024
- How to assemble the North Box 6XL air purifier kit.
This is for the most recent (June 2024) variation of this design. If you have an older version (with frame slots) please refer to this video:
• Northbox 6XL Kit Assembly
NOTE: refer to the short video below as there is an error regarding how the lower panel and one of the side panels connects. The rubber bumpers should be on the same side.
• Bumper Position NOTE
Our Deluxe Kits come with fans pre-installed, you will need to get your own fans if you buy the Bare kit:
Here are the fans we recommend, you will need six altogether:
www.arctic.de/...
Here are the filters we recommend, be sure to get the 20x20x1 size:
www.costco.ca/...
Contact us at aidankepo@hotmail.com with any questions or comments.
You can get this kit and other models here:
www.northboxsy...
where'd you get the pylon push pins that you use to mount the fan grill and fan to the hardboard? it seems a lot more easier to use than the screw, washer and bolt assemblies i've seen.
They are called "weather strip retainers" and are used by General Motors.
Hi! I'm interested in getting this model. Is it quieter than the 5X one?
The fans are rated the same sound level by the manufacturer as the smaller ones we use in the 5X but there are six instead of five. The sound level measures a bit higher, 39.8 db vs 34.1 db, but the difference is minimal, especially once you get farther than a metre.
I am assembling my kit I just got. Should the bumpers be on the same corner or opposite corners. Watching both videos because I think my kit is new, but my bolts have ring nuts …
Thanks for catching that, I'd recommend putting the bumpers on the same corner, that was an error on my part and I'll have to update the video! The ring nuts are a left over from the previous design but the way they work is the same for both versions, we had to replace them when it became impossible to get them for a while.
@@RobertFantinattoSo the bumpers go away from the fans. Couldn’t figure it out.
@@TaraTrus-u1v The fan bodies provide something for the filters to rest on, the bumpers do the same for the opposite corner, sorry about the confusion but thank you for pointing out the error!
@@TaraTrus-u1v feel free to email me if you run into more trouble: aidankepo@hotmail.com
One question the link is broken for the 20X20X1, can I confirm which Filtrete model it is?
Thanks for pointing out the broken link, I have updated it and hopefully it is fixed.
You want the 3M Filtrete MPR1900 or 2200, both are MERV13 rated, and 20 x 20 x 1.
Here is the link just in case:
www.costco.ca/3m-filtrete-mpr-2200-1%22-premium-furnace-filters%2c-4-pack.product.4000178960.html
@@RobertFantinatto awesome thank you
@@RobertFantinatto Thanks have ordered the filters!