DIY 10 CH (iBus to PWM) Receiver for FlySky i6 and iA6b receiver
HTML-код
- Опубликовано: 9 сен 2024
- Hello Everyone,
We are going to make a ten channel PWM receiver (similar to iA10b) using Arduino Nano. It will cost you just Rs.200 for the Nano board and it has wide range of applications. You can use all 10 channels of your tx to make RC robot, RC excavator etc.
You will have to upgrade your transmitter to 10 channels if it still has old 6 CH firmware in it.
Thank you.
Arduino Nano : amzn.to/2NyCQn2
Code : drive.google.c...
Jabardast bro
thanks bhai
@@SwapnilNimbalkar bro heart please ❤️
Thank you very much for this, and especially for adding subtitles! 👍👍👍
You're welcome 😊
thank you for creating this video and sharing knowledge this really help me in my robotics also with a subtitle👍👍👍
Bro.you are great.Maanna padega. God bless you.
thank you bhai
bahuti kam ka video thank you
thank you
Obrigado pelo vídeo, ajudou muito 🪽👍
Thank you very much for this!!!
Its So amazing.....
Thanks :)
Are bhai eshe kehate he content 🤩
Thank you so much 😀
Excellent. Thank you.
welcome
bhai i6x ordered😎from fly robo
good decision
Great Brother👌👍
Thank you so much 😀
Cool
thanks
Hi it's not showing anything in the serial monitor, I followed all the steps
It was so useful that made me subscribe
Thanks
Thanks
Welcome
Very interesting! Do the standard servo ports of the receiver still work or does using ibus deactivate them?
सर आपने जो ट्रांसमीटर और रिसिवर बनाया था उससे एक प्लेन या फिर ड्रोन उड़ाने के लिए आप कम्पलीट वीडियो बनाए प्लीज
ha uska use karke ek plane banane wala hu mai
Dear, my nRF module is transmitting data some time what may be problem?
👍
Bhai fpv head tracket bnao please😮❤❤❤❤
Sir maine i6s transmeetr hai but muje channel set karna nhi aa rhe hai dron ke liye pliz kuch help kar dijiye
matlab? Aux channels?
nice video bro
Thanks for the visit
How to make d i y pwm to PPM encoder using arduino
bro, where should i buy depron for rc plane
Search online or may be visit lamington road if you are from Mumbai
Thanks for this.
By any chance, can you explain the nature of the rx outputs? I want to make my own flight controller and I'm stuck because I don't know what protocol the fs-ia6b uses.
Thanks
It uses iBus protocol,
@@TanM thanks I already figured it out. And I'm programming it for the pwm outputs only. I'll consider iBus later maybe.
@@rajatmond I went down the same path. Getting IBus working is so very worth it. That's if you are using a microcomputer like an Arduino. You'll find that PWM has too many errors. Looks like I'm responding to a year old post. lol. Well, anyone that sees this, please give IBus a good try. This method presented here works great.
@@froggytoad7763 yes I used a m7 nucleo dev board(mbed OS). Never got around to using ibus since this is just a hobby and i have to code drivers too if i want to use anything more than pwm.
@@froggytoad7763 Olá, eu tentei fazer mas não funcionou. Poderia me dar mais alguma dica? Obrigado! =)
Great work...
Is it possible to use mpu6050 as a gyro with flysky receiver, for rc car?
Yes should be possible
amazing, but any disadvantages?
Thanks, no disadvantages
Can we use pro mini instead of nano? 🙏
I need the code please
Bro, please make this type of 10ch transmitter by Arduino...
Oh. 10ch tx? try karunga pakka. uske liye STM32 board use karna padega 72mhz wala. Arduino is slow runs at 16mhz
@@SwapnilNimbalkar thank you bro, I will wait for your TX project...
@@addiction-69 ya sure
Can you write one to use an 8 channel relay board with the FS1A6B and a Nano or Uno?
that should be easy
@@SwapnilNimbalkar that would be awesome!! I've been beating my head against the wall the last couple days trying to figure it out.
@@SwapnilNimbalkar Would you be willing to write it for me?
Nice! Can you please explain how you upgraded your TX from 6 to 10 channels? I am afraid of ruining my TX when trying!
Please, I need the code. The link did not open for me
I used this program but in serial monitor if a print serial.available it is alwaya giving 0 output, and not working, Rx led is blinking in arduino nano. Please help
bind ur tx rx
@@SwapnilNimbalkar i have done that rx pin on arduino is also blinking but serial.available is always 0
What Protocol iBus iA10b
I'm connect with iA10b it error protocol iA6b please help told me dear .
it should be same
Nice try , but again it will get more lag , regular flysky receiver is equiped with 32 bit processer , and Arduino is 8 bit , so the latency will be quit high using Arduino , flysky receiver has 76ms latency and may be with Arduino it would be 900ms
But at the end of the day
Nice try , keep it up
I dont think there is much latency. And for robotics applications or even RC planes this much of latency is ok.
@@SwapnilNimbalkar yeh you are right , nice try
Sir can you make Drone using homemade transmitter and receiver which you have make and flight controller using arduino UNO
I will try for sure
Nice video
Recently I used ibusbm library in one of my projects with arduino nano
However I noticed that FAILSAFE is not working with ibus.
I was wondering if anyone is experiencing the same problem
Temporarily I solved it so that I connected channel 5 to one of the input pins on nano so that the program brakes when failsafe is triggered
I really have no idea about that
serial monitor par cilk karane port busy aa raha he
dusra kuch aur program run kar rahe ho kya
Bhai mere me code upload krne ke bad
Serial moniter me kuchh bhi dikh raha hai...pura setting kr chuka hu fir bhi
Koi channel kam bhi nhi kr rha h
board check karo ek bar. LED blinking ka code upload karo aur onboard LED jal rahi hai ki nahi mujhe batao. Mai instagram pe online rahta hu you can talk there
I connect like you I use FS-Ai10B but then I upload error problem uploading to board
fir arduino ka kuch issue hoga. arduino drivers install hai na thik se? com port dikha raha?
@@SwapnilNimbalkar hi you can help me about arduino read FS-Ai10B PWM control servo 180⁰ because usually RC control servo 90⁰ < . How to write code ?
I did the same, it was working fine.. then it stopped. PPM shows zero signal always... But individual servo pins do work.. only problem is with ppm pin. Why it stopped. Any ideas?
have you turned on PPM output in TX?
@@SwapnilNimbalkar yes
Apology for any typos.. i meant to say that the ibus pin is not working... The individual ppm pins for servos do work. I have enabled PPM.
@@voldoreabhi same is happening for me do you get any solution for this ?
What is the range of this transmitter and reciver in kilomter
should be around 500m
Kya reciver se power de ne se Arduino nano damage hoga? Jaise apne diya
nahi
Bhai aap ne jo brushed esc use kiya h vo heat up hota h kya, life kaisi h uski. Or rc car ke liye speed precise control hota h kya as par throttle response
Wo faltu ESC hai ekdam. mat lena. costly bhi hai. heat hota hai. isase acchha hai L298N aur arduino se khud bana lo ek ESC
@@SwapnilNimbalkar OK bro main buy karne ki Soch raha tha robu se
@@jonujangid3J its your decision
@@SwapnilNimbalkar bro aap vedio banav na mini brushed esc ka jo ki rc car ke liye Ho or promotional control Ho
Bhai mere receiver me esc lagatehi shot hua aur fir ny chal raha hai reciver
ESC kharab hoga fir
Sir i want to buy this TRANSMITTER which you are using...can i know where i can get it in mumbai ????and other components too like brushless motor ESC etc Please rply
Lamington road
@@SwapnilNimbalkar any shop name u know?
Jaisa aap dc mind ko bhejta ho
Wiring diagram plz not clear in the video
It should be
What is the price of this transmitter (flysky fsi6)
amazon pe dekh lo
How to convert Transmitter to 10 ch bro
oh. uske liye ye video dekho ruclips.net/video/I8ilTsO74lg/видео.html
bhai aap 1000 kv ke motor ka plane kitne %throttle me udate ho
wo plane pe depend karta hai. Mera sabse pahla plane jo pusher tha wo sirf 30% throttle pe udta tha.
aapne jo 3 saal phle plane bnaya tha jiske 4 parts the
usi se inspired mene bhi ek plane taiyar kiya hai aap se jald hi share karunga transmitter aane ke baad flight bhi krunga wingspan 50 inch and length 37 inch 1000 kv motor, rudder and elevator simple 3 ch plane☺☺☺
AA cell se receiver chal sakta hai kya
ha
Bhaiya iski range phele kitni thi aur ab kitni ho gayi hogi
isase range utnihi rahegi kam jada nahi hoti
this code is work in arduino uno?
yes
Plz make a cargo plane
ok try karunga
Bro kya mai (quartz component.co) website se electronic saman manga sakta hu kya ye website safe hai please reply bro
pata nahi yaar, mai pahli bar sun raha hu iska naam
@@SwapnilNimbalkar love you ♥️ bro thanks for reply
@@Rajsmartsolutions Cool
Bhai aap apna video per code bhej karo
ok
Hello dosto... Mere Bhai mere dost paper airplane kut paryanta ala re
aaila banawto banawto nakki
Rimot kantorol. Robot. Banao
ok ok
bhai comment ka jabab Naidia please bhai jabab dijia
kaunsi comment
Sorry bhai jabab mila thank you very much ap reply message nehi aiata
Paisa barbad ho gaya
English clickbait title. Language not english.
dude...........
@@SwapnilNimbalkar I just watched 15 videos with English title and English speaking voice. And guys are from Afrika!! So either go learn English or stop this English titles thing.