it took me a long time to come up with what i use but basically... go to Harbor Freight and pick up some of the "storehouse" containers that have the little boxes in them. the 20 bin one works great for electrical ends and crimpers. Another one without the bins works good for US/Metric sockets (deep and shallow) and ratchets. Use the socket rails to organize further. The deep 8 bin works great for a propane bottle and acccessories. The 15 bin works good for decking screws,, nails, and another for 1/4 inch drive sockets (on rails)and another for screwdrivers. they stack nice handles up and only take up 1/3 of one size. wrench wraps for US and Metric lay on top. Passsenger side of toolbox has tow ropes, chain lug wrench. ... oil and lubricants go in a milk crate in the center. top tray has all smaller stuff.
@@TBBuilds Don't get me wrong you've organized your box for you but you can get a LOT more stuff in there. I'd upload pics but not exactly sure how to do that. Please advise.
Yeah, I had to custom make that by removing a panel from an existing cover and cut the rails. Made it before I started my RUclips channel, but wish I would have recorded it. DM me on Instagram if you have any ideas for making your own, I may be able to help you out. So far, I have liked the setup too and have had it for about 2 years now, thanks.
You've got some great ideas! I'll be putting some of these to use on my work truck. Honestly one of the best set-ups I've seen. Over 13k views at the time I watched this... everyone should subscribe!
Thank you for the support and I am glad I could help. Feel free to send me pictures of your work truck set up once your done on Instagram (@tbbuildsco) or email Tbbuildsco@gmail.com Thanks again!
I’ve got so much sh in my craftsman, but we share about the same tools and ideas. Funny seeing the bike pump cause I got one of em mugs in there as well ha
Awesome. I’m glad I could help. Feel free to send me pictures once you’re done on Instagram or email (tbbuildsco@gmail) I’d love to se how it turns out for you.
How is that bed cover with a toolbox I was thinking about getting a half bed cover like that to does it seal incomplete or does water and snow still get between tool box in the bed cover
Yeah so the bed cover I custom made. The toolbox had a lip in the front that I could shove it he cover under about half and inch or so which helps it with water, but it is by no means water proof and I will get water in the bed with heavy rain but less than if it weren’t covered at all so I am happy with it. I have had a lot of questions on the bed cover so I may make another video just about the cover in the future.
Yeah it works quite well. Honestly, not sure where I got it, but something like the link below from Amazon or a craft store would work. I used a heat knife to cut it to size. www.amazon.com/dp/B07KZGJYRS/ref=cm_sw_r_cp_api_glt_fabc_E4BHRQB8T65G6EG1JTEZ
No, there was an additional piece of sheet metal under the top piece of the lid to give it more strength. So the screws only went through that piece and not the outer piece
I custom made it. It is a BakFlip. I don’t represent Truck Hero (the parent company) but I work for the company and had access to a cover that was going to get thrown away.
The light is a Braun 845 lumen under hood light from harbor freight: www.harborfreight.com/845-lumen-underhood-rechargeable-work-light-63990.html Not sure where the one I got came from to be totally honest. Most of the ones I am seeing are ratchet type not thread type which honestly is probably a nice feature. Here's a link to one at Home Depot: www.homedepot.com/p/207097432 And Amazon: www.amazon.com/dp/ B00002N9G3/ref=cm_sw_r_cp_api_fabt1_EyPRFbHHMY6SD Those are not affiliate links just stuff I found on the web. Hope this helps!
Plano 2350000 (smaller two): www.walmart.com/ip/Plano-Fishing-Tackle-Boxes-Bait-Storage-Prolatch-Adjustable-Transparent-Stowaway-Utility-Box-Clear/16351071 Plano 2375015 (bigger one): www.walmart.com/ip/Plano-ProLatch-Stowaway-Large-Clear-Organizer-Tackle-Box-Large-Clear/16351078 I found them way cheaper on Walmart compared to Amazon. These aren’t affiliate links. Hope it helps!
It’s a Braun 845 Lumen Underhood Rechargeable Work Light. Bought it at harbor freight. www.harborfreight.com/845-lumen-underhood-rechargeable-work-light-63990.html
Milk crates work good for dividers, also cut a sheet of plywood to fit the bottom of the box to keep the noise level down.
I’ve always used a piece of thickish carpet. Plywood is a good idea too!
That spreader bar is a great idea, think im gonna steal that
Absolutely, go for it! Has worked really well for me.
it took me a long time to come up with what i use but basically... go to Harbor Freight and pick up some of the "storehouse" containers that have the little boxes in them. the 20 bin one works great for electrical ends and crimpers. Another one without the bins works good for US/Metric sockets (deep and shallow) and ratchets. Use the socket rails to organize further. The deep 8 bin works great for a propane bottle and acccessories. The 15 bin works good for decking screws,, nails, and another for 1/4 inch drive sockets (on rails)and another for screwdrivers. they stack nice handles up and only take up 1/3 of one size. wrench wraps for US and Metric lay on top. Passsenger side of toolbox has tow ropes, chain lug wrench. ... oil and lubricants go in a milk crate in the center. top tray has all smaller stuff.
That sounds pretty solid! Thanks for sharing!
If you’d like, I’d love to see a picture of your set up.
@@TBBuilds Don't get me wrong you've organized your box for you but you can get a LOT more stuff in there.
I'd upload pics but not exactly sure how to do that. Please advise.
I believe it, sounds like you have quite the system. Email me at tbuildsco@gmail.com or message me on Instagram @tbbuildsco whatever works
An organized video about an organized toolbox. That’s my jam.
Haha that was the goal. Glad you liked it 👍
Perfect!!! Thats exactly what I’m looking to do for my truck and couldnt find a setup until now. Great vid
randomly watching this video looking for ideas and i see the Cole Sepesi Banner! I used to Race ATV Nationals and knew Cole growing up racing in MI!
That’s awesome 👍 I lived with him for awhile, he is one of my good buddies. Small world. Hope you enjoyed the video!
Cool video. I have same the truck. Do more videos on it.
Thank you for the support! Do you have anything in particular you would like to see? I will for sure be making more, love that truck.
@@TBBuilds the bed cover I've Never seen one with tool box. I would like to do the same.
Also i like how u put your bike on it. Awesome set up.
Yeah, I had to custom make that by removing a panel from an existing cover and cut the rails. Made it before I started my RUclips channel, but wish I would have recorded it. DM me on Instagram if you have any ideas for making your own, I may be able to help you out.
So far, I have liked the setup too and have had it for about 2 years now, thanks.
This channel is already underrated. Good job
Thank you! Working on growing the channel, I appreciate the support.
You've got some great ideas! I'll be putting some of these to use on my work truck. Honestly one of the best set-ups I've seen. Over 13k views at the time I watched this... everyone should subscribe!
Thank you for the support and I am glad I could help. Feel free to send me pictures of your work truck set up once your done on Instagram (@tbbuildsco) or email Tbbuildsco@gmail.com
Thanks again!
Ooo, the tackle box is a great idea!
Glad you like that. It has worked great for me and I have used it for over a year now.
My thoughts exactly. What a fantastic hack
Thanks! Glad you like it 👍
I’ve got so much sh in my craftsman, but we share about the same tools and ideas. Funny seeing the bike pump cause I got one of em mugs in there as well ha
Love it! Share your organization tips if you got some good ones.
Great video. Took your advice on the light and also went thru my tool box removed items i did not need and organized it Thank you !!
Love it! Glad it helped.
loved the light idea, i have a similar bar IN my BED , never thought to put it in the box. got me thinkin…. clever like seein these videos
Glad it got you thinking! Hope you come up with something.
Good job! So organized.
@bhinsch25 the difficulty is keeping it that way 😂 thanks for the support!
Great video, thanks for the detail and link to the light!
Of course! Glad you liked it.
Thank you. Im gonna take some ideas from you because i need some help with organization .
Awesome! Glad I could help!
I really need to organize my box nice job 👍
Thanks. Hopefully gave you some helpful tips
Great video. I got some good ideas for my own layout. Thanks.
Awesome. I’m glad I could help.
Feel free to send me pictures once you’re done on Instagram or email (tbbuildsco@gmail) I’d love to se how it turns out for you.
I have found keeping charcoal in my truck bed helps to prevent rust to my tools.
Oh really?!? That’s a good idea. Does the box have a good seal?
Maybe some bigger desiccant bags would work too.
@@TBBuilds my grandpa taught me to put side walk chalk in my wall box drawers …. Works at home , may work in truck?!
Good job.
Thank you! I appreciate it!
How is that bed cover with a toolbox I was thinking about getting a half bed cover like that to does it seal incomplete or does water and snow still get between tool box in the bed cover
Yeah so the bed cover I custom made. The toolbox had a lip in the front that I could shove it he cover under about half and inch or so which helps it with water, but it is by no means water proof and I will get water in the bed with heavy rain but less than if it weren’t covered at all so I am happy with it.
I have had a lot of questions on the bed cover so I may make another video just about the cover in the future.
@@TBBuilds hell yeah dude I got a weatherguard and wanted to either get a bed cover or rack
Awesome! Check out Truck Hero. They have many brands for stuff like that.
Link to the bed cover?
Love to tackle box idea where do you get the foam from
Yeah it works quite well. Honestly, not sure where I got it, but something like the link below from Amazon or a craft store would work. I used a heat knife to cut it to size.
www.amazon.com/dp/B07KZGJYRS/ref=cm_sw_r_cp_api_glt_fabc_E4BHRQB8T65G6EG1JTEZ
Thanks man!
Your welcome. Glad you liked it!
Did the screws go through the lid of the box for the light?
No, there was an additional piece of sheet metal under the top piece of the lid to give it more strength. So the screws only went through that piece and not the outer piece
@@TBBuilds did you add the additional metal to the toolbox lid
No, that was already there with the box
Whered you get tonneau cover?
I custom made it. It is a BakFlip. I don’t represent Truck Hero (the parent company) but I work for the company and had access to a cover that was going to get thrown away.
How did you do the bed cover?
I modified a bed cover from a 6.5ft bed F150. I work for RealTruck who makes these covers. Do you like it?
How did you mount those hooks to hold your light??
The lid had a second plate under the outer diamond plate and I just used sheet metal screws into that.
Do you know the brand of your wrench roll?
@ckc3_ they are homemade actually. My mom sewed them up with colored denim fabric.
Where did you buy the flashlight.?
Harbor freight for $35
www.harborfreight.com/845-lumen-underhood-rechargeable-work-light-63990.html
How does the work light hold up with extreme temps?
Haven’t noticed any issues with it but only had it a year so far
What light bar and separator are you using ?
The light is a Braun 845 lumen under hood light from harbor freight:
www.harborfreight.com/845-lumen-underhood-rechargeable-work-light-63990.html
Not sure where the one I got came from to be totally honest. Most of the ones I am seeing are ratchet type not thread type which honestly is probably a nice feature.
Here's a link to one at Home Depot:
www.homedepot.com/p/207097432
And Amazon:
www.amazon.com/dp/
B00002N9G3/ref=cm_sw_r_cp_api_fabt1_EyPRFbHHMY6SD
Those are not affiliate links just stuff I found on the web. Hope this helps!
@@TBBuilds thanks man I appreciate!
7:30 “Big Wire Cutters” 😂 you mean “Electrician’s Hammer”?
Hahaha yes, exactly that 😆 🤣
Got a part # for the plano case?
Plano 2350000 (smaller two):
www.walmart.com/ip/Plano-Fishing-Tackle-Boxes-Bait-Storage-Prolatch-Adjustable-Transparent-Stowaway-Utility-Box-Clear/16351071
Plano 2375015 (bigger one):
www.walmart.com/ip/Plano-ProLatch-Stowaway-Large-Clear-Organizer-Tackle-Box-Large-Clear/16351078
I found them way cheaper on Walmart compared to Amazon. These aren’t affiliate links. Hope it helps!
What brand of light is that?
It’s a Braun 845 Lumen Underhood Rechargeable Work Light. Bought it at harbor freight.
www.harborfreight.com/845-lumen-underhood-rechargeable-work-light-63990.html
@@TBBuilds Thanks man!!
What kind of tool box u got
It’s a Deezee model 91789TSC
K
Check updatee
Wagner 👻