Actually pretty stupid thing to do. Could see that “saw blade” tearing into the foot and cardboard then walking the engine around the garage. Seriously, were you guys even thinking when you tried this
Ha that's the first time I've ever heard of stupidity being called badass😂😂😂😂😂😂😂😂 I mean come on they have this engine on the ground with their feet near a spinning flexplate and hanging wires too come on people buy a fucking engine stand before you and someone else gets hurt😑
Hey dude you can get vortec heads from rock auto.com for 240.00 plus shipping they are better than those factory camel hump heads stop begging for shitty heads😂😂😂😂😂😂😂
What's your cam specs on your corvette 350/350? I'm looking for the factory cam specs or a replacement cam with the same specs as the corvette 350/350. I love your engine and how it sounds. Sooooo goooddddddddd. If you want you can message me on my youtube account. I'm looking to build my 350 like the 350/350 corvette style engine.
The flip flop guy wasn't involved. On wood and oil pan - so what? Every junkyard motor I've ever purchased was fired up this way or I wouldn't buy it. Flex plate? - it's called a flywheel, for a manual. Finally, the wires were no where near any problems and would be hanging in basically the same position after being installed in the car. Stop being a jealous player hater and take your BS someplace else!
For minute I thought it was gonna go in circles with that flywheel so close to the ground. Good job guys.
same here !
That flywheel is sooooo deadly
Was expecting the flywheel to shred something, standing like that.
atleast put that motor on a pallet with 2×4s on each side...geeez
😂
ROFLMFAO!!!! Pussy!! HA HA HA!!!!
Congratulaciones from Venezuela
I was scared for ya? Get a proper stand for somebody looses a flip flop!! 😆
Haha....
Thanks in a million. Great content. Awesome imagination. Grade: A++💥
Going in a '69 'vette, yet can't afford an engine run stand? ROFLMFAO!!!!
Majestic motor and car
Flip flops, propped on wood, no stand, spinning flexplate near feet, rocking on the oil pan as you juice it, loose hanging wires. Bad scene man...
It'll be fine.
Only if you knew what a flex plate is…
LOL.. I thought the same thing...
Looks like a flywheel to me.
Actually pretty stupid thing to do. Could see that “saw blade” tearing into the foot and cardboard then walking the engine around the garage. Seriously, were you guys even thinking when you tried this
Long tubes at least! I can’t believe there are teeth left on that low boy. But nice build men!
Man you guy's are bad ass!!
Ha that's the first time I've ever heard of stupidity being called badass😂😂😂😂😂😂😂😂 I mean come on they have this engine on the ground with their feet near a spinning flexplate and hanging wires too come on people buy a fucking engine stand before you and someone else gets hurt😑
Clean build..!
unbelieveable, stupid runs rampant here
The best Tunes engines got one time to do
???
English son, ENGLISH!!!
Are these guys still alive?
I found an abandoned one of these sitting in the woods by us.
Daniel Bailey look up the casting #s on google
Then sell it to me
gimme those heads!
Hey dude you can get vortec heads from rock auto.com for 240.00 plus shipping they are better than those factory camel hump heads stop begging for shitty heads😂😂😂😂😂😂😂
@@phillipthomas5133 might want them for a numbers matching/period correct build
For such a nice motor and you cant build a nice test stand...
All in one assembly lube in the back round.
1:23 for the start up.
Amigo que aceite usa ese motor soy de Venezuela saludos
What's your cam specs on your corvette 350/350? I'm looking for the factory cam specs or a replacement cam with the same specs as the corvette 350/350. I love your engine and how it sounds. Sooooo goooddddddddd. If you want you can message me on my youtube account. I'm looking to build my 350 like the 350/350 corvette style engine.
Where do I find that overhaul kit , I have a 69 L46 that needs building, info please 🙏
It's called the local machine shop, FFS!!
Dumb question but how did you just start that? Picked up a old mud toy with an old 350 has sat for 15 years
Its easy. Look up 1 goose on here he shows how to fire up 350s if you haven't already learned
Shoot it!!!
Man you guys a fkn ruff
Qué precio tiene el motor 350 Chevy
98 gmc sierra
Is this with the harmonic balancer on ?
Alex A clutch plate and flywheel in one
Has to be to keep the oil in
You gotta dead hole cuz
CUAL ES LA PRESION DE ACEITE ADECUADA?
6 psi
The flip flop guy wasn't involved. On wood and oil pan - so what? Every junkyard motor I've ever purchased was fired up this way or I wouldn't buy it. Flex plate? - it's called a flywheel, for a manual. Finally, the wires were no where near any problems and would be hanging in basically the same position after being installed in the car. Stop being a jealous player hater and take your BS someplace else!
seanoleary1979 will always be one or two cocksperts who is going to talk shit haters
If the wires weren't an issue then why does the engine mount (guy) grab them and pull them up and out of the way right after they start the engine up?
Sorry, but there would be a bell housing in the way of the wires, but nice try.
To dangerous
que # de árbol tiene?
No sé lo que quiere decir
Q tipo de árbol de levas tiene? Q graduación 270; 272. Etc.