Thank you, sir I had to rewind a couple times. I couldn’t get things to work wasn’t understanding it but now I’ve got it down. I know you had to hit the selector on top to save it.
Wow, I knew nothing about this before today……………..and I’m scared! I have no computer experience in doing what you just showed us. Is there a lesson somewhere that moves at 1/10th the speed?
Just got a Helix, so these are very useful indeed. Thanks. Quick question - what is the stand that you Helix is sitting on. I could do with one of those..
Awesome man! Congrats on the Helix. Such a killer piece of gear. It’s a stand from a company called OnStage. They don’t make this one anymore but there’s a new version. The sides of the “holder” are a little different. The Helix LT was actually a perfect fit. The Floor is a LITTLE snug so I cut up a dish towel and put it on the sides to not scratch it. Holds great though. www.sweetwater.com/store/detail/Autolocator--on-stage-stands-mix400-autolocator-mixer-stand?mrkgcl=28&mrkgadid=1669547280&rkg_id=0&campaigntype=dsa&campaign=aaDSA&adgroup=1669547280:DSA%20-%20Product%20-%20Mixers&placement=google&adpos=1t1&creative=248832405304&device=m&matchtype=b&network=g&gclid=CjwKCAiAl7PgBRBWEiwAzFhmmkY57W-UeCC5eqBMRCefBTwGRVGvdaZpnU1HXjcEUBNGZ2dk60B_fhoCeF8QAvD_BwE
Hey Jeremy, I have an LT and Native, I had a terrible time trying to figure out how to assign the expression pedal so that Native could be used instead of the LT for quickly customizing and laying parts. I finally figured out something very obtuse that helped me and maybe you can think about doing a video on how to use the LT/Native together. My solution was to edit my patch on the LT and add a wah effect, assign to Exp 1, but I didn't save it, and voila, now Native knows the pedal is there and works. Would love to hear your comments on why this is and if there is a better approach. Thanks so much!
hi… is the factory 1 drop down menu where you can get to a user file only on the helix? i watched this trying to learn how to load on HX stomp, and not seeing a similar menu.., maybe it doesnt have that feature?
OK Thanks heaps for that on a side note ...... How do you get the IR just on your HELIX PEDAL if you dont have Helix native? And then how do you remove IRs that you no longer use?
Question: so if I use an amp and an IR, I don’t use the cab? Correct? Could you use an Amp and an IR on one side and drop down to a cab on the other? Or run dual amps, one IR one cab?
You can totally use a combo of IR and Cab block if you want. Many people do for sure. You can also run 2 amps into one cab or IR. Just use a split. I am doing a Pt. 2 to the IR/Cab vid.
Hello Jeremy very helpful on all your videos thank you for that. I see you recommended a stand that hold the helix floor unit I just wanted to make sure it was the floor unit that fits. The stand states that it holds a 21.5 Width but the floor unit is 22.05 wide according to specs from line 6. Just wondering if you could give more detail before I buy.
Yep. It holds both the LT and Floor. The Floor is a LITTLE snug so I cut up a black gym towel to protect the sides from scratching. Mine is an older stand though and the new design is SLIGHTLY different and I’ve not tried it.
So My Line 6 Helix floor already has the 3.7. Is that why when I want to try and download the HX Edit nothing comes up after 'go'. There should be like a "get, then like terms and conditions....none of that comes up
I got some presets on my Helix Floor that i bought that i want to use with Helix Native ....... ...can you copy/paste presets from the HX Edit to the Helix Native plugin the same way???
Hey there! so basically and Impulse Response is an audio snapshot of a speaker and microphone or even multiple microphones. just like when in a studio and your cab is mic’d up. An Impulse Response is a capture of the mic in that position on the speaker.
@@JeremyVarao ohhh, wow! okay! so it’s like a saved version of a potential recording setup, interesting! nobody on the internet has explained it this simply, thank you 🤘🏿🤘🏿
Just got an helix lt today no clue what I’m doing downloading a patch but I’m using 4 cable method but only sound I get is clean channel not the priest I downloaded any help would be great
Hi there , i downloaded the Rev'd Purple Pre w_Real Amp IR™ PodGo. Now the zip file only gives 2 files 1: LRS Rev'd EV30 1.hir = 10kb 2: Rev'd Purple Pre.pgp = kb Did this go well? I also get an error when I try to import the Rev'd Purple Pre.pgp. code - 8309 ???
@@JeremyVarao I downloaded this from the line6.com but i saw that i make a big mistake, becouse I did buy it for the Podgo and i have an helix line 6 19" rack :S i hope they be able to change it
I just bought a collection of presets from tine junkie. Unfortunately, they don't have a folder with all of the presets. Each preset is its own folder so I have 100 folders to move over, one folder at a time. Grrrrrr
Lol. I can't even install hx edit. I downloaded it a bunch of times. It said successful but it's not there. When i click the icon it just downloads it again.
Oh man! Sorry. This is the 2nd comment about me hauling ass while explaining. I will make a dedicated IR vid asap. I will try and have it up in the next day or two! Thanks for pointing that out.
An IR is an Impulse Response. It is effectively a capture of a Microphone + Speaker that you can use in place of a stock Helix cabinet. They are sold by dozens of companies. You can find Mesa, Engl, Friedman… all brands and speaker/mic combos. These generally sound better (but not always) than stock cabinets.
@@JeremyVarao Oh wow. Another layer of complexity. You have the Helix Speaker cabs but also I guess you also have the same cabs but mic'd. And I'm sure along with that goes another layer of complexity---Mic selection? I just pray to God that we don't even have the option of MIC PLACEMENT. I'm pretty good with tech but wow. It is gonna be a big change from years of pedals. Unit comes in two days.
Just got the Helix today and your video was a godsend! Very simple yet confusing if you're having to guess at it so thanks so much for your help!
Thank you, sir I had to rewind a couple times. I couldn’t get things to work wasn’t understanding it but now I’ve got it down. I know you had to hit the selector on top to save it.
Thanks, without this video I wouldn't even know about HX edit, this was the piece missing to my Line 6 puzzle haha. keep up the good work
BAM! Thank You! Guys like you are gold to us newbies.
im so thankful i found this
excellent video!
What are you using for a stand for the Helix?
Perfect! Thank You.
Thanks, any help for us poor guys with Windows 10?
Wow, I knew nothing about this before today……………..and I’m scared! I have no computer experience in doing what you just showed us. Is there a lesson somewhere that moves at 1/10th the speed?
you can email me at dunkysndemos@gmail.com if you want and we can set up an online zoom or Google Meeting and I can walk you through it.
Boston Baby :) Great video Brother
Yeah KID! Thanks for checking it out!
Pride to join the Idiots Club, I'm truely honored.
Just got a Helix, so these are very useful indeed. Thanks. Quick question - what is the stand that you Helix is sitting on. I could do with one of those..
Awesome man! Congrats on the Helix. Such a killer piece of gear.
It’s a stand from a company called OnStage. They don’t make this one anymore but there’s a new version. The sides of the “holder” are a little different. The Helix LT was actually a perfect fit. The Floor is a LITTLE snug so I cut up a dish towel and put it on the sides to not scratch it. Holds great though.
www.sweetwater.com/store/detail/Autolocator--on-stage-stands-mix400-autolocator-mixer-stand?mrkgcl=28&mrkgadid=1669547280&rkg_id=0&campaigntype=dsa&campaign=aaDSA&adgroup=1669547280:DSA%20-%20Product%20-%20Mixers&placement=google&adpos=1t1&creative=248832405304&device=m&matchtype=b&network=g&gclid=CjwKCAiAl7PgBRBWEiwAzFhmmkY57W-UeCC5eqBMRCefBTwGRVGvdaZpnU1HXjcEUBNGZ2dk60B_fhoCeF8QAvD_BwE
@@JeremyVarao Thanks for that Jeremy.
Can you down load IRS onto the HX stomp XL the same way?
You can indeed
Hey Jeremy, I have an LT and Native, I had a terrible time trying to figure out how to assign the expression pedal so that Native could be used instead of the LT for quickly customizing and laying parts. I finally figured out something very obtuse that helped me and maybe you can think about doing a video on how to use the LT/Native together. My solution was to edit my patch on the LT and add a wah effect, assign to Exp 1, but I didn't save it, and voila, now Native knows the pedal is there and works. Would love to hear your comments on why this is and if there is a better approach. Thanks so much!
hi…
is the factory 1 drop down menu where you can get to a user file only on the helix?
i watched this trying to learn how to load on HX stomp, and not seeing a similar menu..,
maybe it doesnt have that feature?
OK Thanks heaps for that on a side note ...... How do you get the IR just on your HELIX PEDAL if you dont have Helix native?
And then how do you remove IRs that you no longer use?
Thank you, I am definitely an idiot..so it was very helpful.
Very helpful!!!
Thanks bro!
Helix question, I'm adding more and more presets, can you add new user folders? In HX edit?
Hooooooooooo ...........
my hero!!!
Trying to follow getting IR on computer. You went through so quick I could not get it. Please describe how to do it. Thanks. Enjoyed series up to now
Will do. You are not the first person to say I was trucking through too fast! LOL! Will get a dedicated IR vid up in the next day or two. Thanks!
Question: so if I use an amp and an IR, I don’t use the cab? Correct?
Could you use an Amp and an IR on one side and drop down to a cab on the other?
Or run dual amps, one IR one cab?
You can totally use a combo of IR and Cab block if you want. Many people do for sure. You can also run 2 amps into one cab or IR. Just use a split. I am doing a Pt. 2 to the IR/Cab vid.
can you do it on the POD go?
A video. showing how to load presets/IR's or a full series like this one?
@@JeremyVarao yes
I just bouth helix lt
And i cant find pressets i made im lost on pages
Are you using HX Edit? Also, do you know what Preset bank you saved them under?
No yet
Im just working on hardware
I dont where i saved 1A i think
Thanks a lot for heping
How do you get hx edit
Hello Jeremy very helpful on all your videos thank you for that. I see you recommended a stand that hold the helix floor unit I just wanted to make sure it was the floor unit that fits. The stand states that it holds a 21.5 Width but the floor unit is 22.05 wide according to specs from line 6. Just wondering if you could give more detail before I buy.
Yep. It holds both the LT and Floor. The Floor is a LITTLE snug so I cut up a black gym towel to protect the sides from scratching. Mine is an older stand though and the new design is SLIGHTLY different and I’ve not tried it.
Hi ! (Sorry for my english) rename windows snapshots ? For : verse, refrain, chorus, solo etc ? Thank !
So My Line 6 Helix floor already has the 3.7. Is that why when I want to try and download the HX Edit nothing comes up after 'go'. There should be like a "get, then like terms and conditions....none of that comes up
Thank you
I got some presets on my Helix Floor that i bought that i want to use with Helix Native .......
...can you copy/paste presets from the HX Edit to the Helix Native plugin the same way???
can someone please tell me what an impulse response is?
Hey there! so basically and Impulse Response is an audio snapshot of a speaker and microphone or even multiple microphones. just like when in a studio and your cab is mic’d up. An Impulse Response is a capture of the mic in that position on the speaker.
@@JeremyVarao ohhh, wow! okay! so it’s like a saved version of a potential recording setup, interesting! nobody on the internet has explained it this simply, thank you 🤘🏿🤘🏿
Just got an helix lt today no clue what I’m doing downloading a patch but I’m using 4 cable method but only sound I get is clean channel not the priest I downloaded any help would be great
Hi there , i downloaded the Rev'd Purple Pre w_Real Amp IR™ PodGo.
Now the zip file only gives 2 files
1: LRS Rev'd EV30 1.hir = 10kb
2: Rev'd Purple Pre.pgp = kb
Did this go well?
I also get an error when I try to import the Rev'd Purple Pre.pgp. code - 8309 ???
Hmm... not sure. I have not bought or downloaded this. Was it from LiveReadySound?
@@JeremyVarao I downloaded this from the line6.com but i saw that i make a big mistake, becouse I did buy it for the Podgo and i have an helix line 6 19" rack :S
i hope they be able to change it
Thank you!
I just bought a collection of presets from tine junkie. Unfortunately, they don't have a folder with all of the presets. Each preset is its own folder so I have 100 folders to move over, one folder at a time. Grrrrrr
Lol. I can't even install hx edit. I downloaded it a bunch of times. It said successful but it's not there. When i click the icon it just downloads it again.
I just got my helix last week I geuss I am a dummy because I can not get where to get the IRs
These tutorials are helpful, but you didn't explain what an impulse response even is!
Oh man! Sorry. This is the 2nd comment about me hauling ass while explaining. I will make a dedicated IR vid asap. I will try and have it up in the next day or two! Thanks for pointing that out.
What is IR? You got a lot of pedal guys here. That word means nothing to us and have no idea what it is.
An IR is an Impulse Response. It is effectively a capture of a Microphone + Speaker that you can use in place of a stock Helix cabinet. They are sold by dozens of companies. You can find Mesa, Engl, Friedman… all brands and speaker/mic combos. These generally sound better (but not always) than stock cabinets.
@@JeremyVarao Oh wow. Another layer of complexity. You have the Helix Speaker cabs but also I guess you also have the same cabs but mic'd. And I'm sure along with that goes another layer of complexity---Mic selection? I just pray to God that we don't even have the option of MIC PLACEMENT. I'm pretty good with tech but wow. It is gonna be a big change from years of pedals. Unit comes in two days.
Immediate subscribe click.
The most important part of actually adding the IR to the Preset was too fast. You switch between IRs and I got lost. Good try though.
my home no Pc
Many thanks!