Hello, this is an awesome project, I just want to ask that instead of push buttons how can we use the fan speed regulator? If it is possible then can you do a video on that ??
We are using the pushbuttons because we are looking for complete synchronization between the app and the manual switches, For example, when using the 4 steps rotary fan regular, if we set the speed manually from the rotary switch to 4, then from the app to speed 1, the result will be a fan spinning with speed 1 and the switch on speed 4, we tried to avoid this with the two pushbuttons. Another benefit is the two pushbuttons are using two GPIOs, while the 4 speed rotary switch is using four GPIOs, so we are saving two GPIOs by using the pushbuttons.
Why can’t we use the devices added to alexa as triggers for routines? Also it would be really nice if IR can transmit a different code based on the receiver code. E.g received code is samsung vol +/- and transmitted code from esp is NEC or some other brand vol +/-. Would really appreciate the help and would love buy the license as it will make me able to repurpose the old ir remotes to control wifi/zigbee smart devices. Thanks for the amazing product.
Hi,Your IoT Platform is Awesome,for the past 5years I check several IoT Platforms,out of all I like your platform very much and if it’s possible please put 433Mhz Remote for all speed control also (for 4steps) and instead of 2 switch please put normal fan regular one.
Great :) Q: Does CADIO Firmware supports ESP32-S3 Modules? Suggestion: It will be great if you can build a web installer for flashing firmware into ESP devices, like the Tasmota web installer.
Brother I have one problem After upload confirgation mode also done all setting of relay switch gpio pins selected but not device are shown in cadio plz provide solutions
For fan speed controling two main features missing. First one is manual switch for On /Off the fan. Second one is controlling fan speed via IR/RF Remote 🤔😞. Waiting for the update firmware
Need some other features, like pressure sensor, other temperature sensor, and if a switch is link with temperature or other then the switch is disabled, only active through link . This is not good,
hey there! i want to configure esp 01 for cadio, sir so i need 2mb flash file which is removed from the website, please help me & provide it, thank you!!
No this is for AC fan, but you can use the "dimmer" device instead with DC fan, I did it with 12v fan at the end of this video: ruclips.net/video/xIzKyX_BOu0/видео.html
I love this project.but I hade trouble for fan speed control. Because, here all are using regulator type. I'm searching auto reset 2 way switch for switch board. But my bad luck I can't find that. My parents are comfortable with using the regulator. So will you turn the fan speed control push button into a regulator .
Yes it's already supported. If you use (press) switches mode, you can choose (hold any press switch) option in the config button table, so you don't need a config button anymore, and holding any switch for 5 seconds will activate the config mode.
Google home doesn't recognise Cadio fan as speed changeable device it only shows as switch And in Alexa it is detected as dimmable led so you have to say change the brightness instead of change the speed Any solution ?
The trial License is free and valid for 500 operating hours, and it can be renewed for an unlimited number of times by erasing and re-installing the firmware. ''it can be renewed for an unlimited number of times by erasing and re-installing the firmware.'' What's that mean?
It means you have to format the esp board with some flashing software or Android app. Then you just repeat installing cadio firmware again and you will be able to get 500 hours again
I purchased one unit permanent license of your CADIO app. But my Nodmcu got wasted and my unity was deleted. Now how can I restore my permanent license in new Nodmcu. Please help me.😭😭
The unit will never lose the permanent license is under any circumstances, even if you erase the firmware and reinstall it, the unit will automatically restore the permanent license once it connected to the internet
Hello sir , i want to buy subscription of cadio cloud but the problem is that i have no wifi network i want to connect esp32 using sim800l will you help me on it . That how i connect esp32 with cadio app using sim800l. There is no video on it .
Another break through for Cadio ❤ they are the best
Cadio is Growing Fast,good to see ya
When will ESP 32 cam board will be supported
Hello, this is an awesome project, I just want to ask that instead of push buttons how can we use the fan speed regulator? If it is possible then can you do a video on that ??
We are using the pushbuttons because we are looking for complete synchronization between the app and the manual switches,
For example, when using the 4 steps rotary fan regular, if we set the speed manually from the rotary switch to 4, then from the app to speed 1, the result will be a fan spinning with speed 1 and the switch on speed 4, we tried to avoid this with the two pushbuttons.
Another benefit is the two pushbuttons are using two GPIOs, while the 4 speed rotary switch is using four GPIOs, so we are saving two GPIOs by using the pushbuttons.
Really thank you for adding this feature 🎉🎉🎉
Hi cadio , I am really happy with my experience on cadio home automation ❤ . But I have a doubt why don't you ingrate GIOP09 Pin in your software?
i really love it, i hope you could make an introduction video about CADIO voice control function🥰
This Cadio developers are fucking awesome take my money 💰🤑💰🤑💰 i really love this guy so much 😍😍😍😍😍😍😍😍😍😍
Thank's bro, amazing work!!!
Thanks indeed for your great effort. We really appreciate.
Please we hope that you will create an rf433 blaster. Thanks once again.
Why you're not making videos for long time
Sir is it possible to control fan speed with Google Assistant with this project ?
Yes
Why can’t we use the devices added to alexa as triggers for routines? Also it would be really nice if IR can transmit a different code based on the receiver code. E.g received code is samsung vol +/- and transmitted code from esp is NEC or some other brand vol +/-. Would really appreciate the help and would love buy the license as it will make me able to repurpose the old ir remotes to control wifi/zigbee smart devices. Thanks for the amazing product.
Good job sir thank you for ❤❤❤❤❤
Hi,Your IoT Platform is Awesome,for the past 5years I check several IoT Platforms,out of all I like your platform very much and if it’s possible please put 433Mhz Remote for all speed control also (for 4steps) and instead of 2 switch please put normal fan regular one.
Fan speed control using IR and RF remotes is now supported.
Yes, Regrading Manual Control, Instead of 2 Buttons, If you Can use 4Pole Fan Rotatory Switch Means Good.
Can we use cadio for commercial use
I HAVE A SUGGESTION FOR YOU..
THE USED GPIO PINS SHOULD NOT APPEAR IN GPIO LIST...
IT WILL BE EASIER
PLEASE,PLEASE work on info file it should be editable after flashing and using(so no need to flash esp32 when we want to edit info file) Please
Yes , I am also facing some issues with it . Can you tell me how to add a sensor in cardio. If I have already made 4 on/off model .
Can we add seven segment display to show fan speed , if yes then ,how?
it is possible to use this for my smart pet project like pumping water for bowl?
Hello. I want to integrate this into my home alarm system. Which mode should I use?
Water level can be seen in cadio pletform ?
Can I connect more than one nodeMCU with this app
Great :)
Q: Does CADIO Firmware supports ESP32-S3 Modules?
Suggestion: It will be great if you can build a web installer for flashing firmware into ESP devices, like the Tasmota web installer.
In one account how many units I can create after purchase platform plan
And what is the cost of the plan
Hi this is a great project. Can i ask if you have a source code for the microcontroller? Thank you
Can we turn on or off with manual switch
Hello my friend, does it support servo motors?
Cool, very good... it is possible to add an RF 433 transmitter
At last ❤❤ Thanks man
Can I integrate cadio to HA?
how to add soil moisture and rain sensors
can you you use 2 door sensor with one esp for next project please
it would be so nice if you show us how to use CadioSerial Library
Please give updates....the current firmware is unstable in power supply.
Sir, is possible veribal input data
Am I able to connect 2 or more mobile with one CADIO esp32
please, How to set up a Smart Home Automation System with Multiple ESP32 IoT Networks with Cadio, How to setup / configure multiple units in Cadio?
Just repeat what you did for the first unit, and they will automatically be linked to your account
It work perfect but when the esp8266 turn off and you turn it on again all the data on esp8266 is clash what need to do for that
Brother I have one problem
After upload confirgation mode also done all setting of relay switch gpio pins selected but not device are shown in cadio plz provide solutions
Thank you for your help
Nice work friend , what program do you use for schematic diagram drawing in the video?
Just a PowerPoint presentation
Legal muito bom... é possível adicionar um transmissor RF433
For fan speed controling two main features missing. First one is manual switch for On /Off the fan. Second one is controlling fan speed via IR/RF Remote 🤔😞. Waiting for the update firmware
Under testing, will be supported very soon.
Fan speed control using IR and RF remotes is now supported.
Please make a video on serial output as soon 🙏🏻
Hi, what is boost mode in cadio Android app.
Need some other features, like pressure sensor, other temperature sensor, and if a switch is link with temperature or other then the switch is disabled, only active through link . This is not good,
When will you upload the video?
how to add soil moisture sensor
How to control servo motor using cadio
I want to use 2 fans but i am only getting the settings menu for one fan...
I have already bought the license and i want to control 2 fans
Does it support touch sensor 🤔🤔🤔🤔
Yes
hey there! i want to configure esp 01 for cadio, sir so i need 2mb flash file which is removed from the website, please help me & provide it, thank you!!
Can you tell us how to upload the FILE IN ESP32 SMD CHIP
HOW WE CAN USE ULTRASONIC SENSOR WITH CADIO?
Hello
Can I use the same circuit for a 12v fan speed control fan?
No this is for AC fan, but you can use the "dimmer" device instead with DC fan, I did it with 12v fan at the end of this video:
ruclips.net/video/xIzKyX_BOu0/видео.html
@@cadioHomeAutomation
ırfz44n can I use?
Ir receiver not working properly in esp32 how can solve this problem
Need to control fan with TRIAC module with ZVC
Can you please share the code using triac for smooth control of fan
Plz make possible to reset the gpio pin and wifi password with in the app it is easy to use it
Only the wifi credentials, in the config mode.
@@cadioHomeAutomation please one of my client is complaining of device going offline and he has the permanent license
@@smartteg7381 update the firmware to the latest version
@@cadioHomeAutomation okay I will try that and give you feedback
Sir is it possible to control fan speed with Google Assistant with this project ?
I love this project.but I hade trouble for fan speed control. Because, here all are using regulator type. I'm searching auto reset 2 way switch for switch board. But my bad luck I can't find that. My parents are comfortable with using the regulator. So will you turn the fan speed control push button into a regulator .
kindly use touch sensor
i have a one question , if i buy a unit and same esp32 going to faulty after some days , so in that case how to transfer license for new esp32 .
egycad.com/cadio/docs/pricing/
CADIO Home Automation: Can something else be used instead of the capacitor here?
What is the problem with capacitors?
Can I use six relays and six switches in Nodmcu?
You need an external MCU
For config button instead on off holding mcu board button can we try (on off )switch continuously 10-12 times the config mode will turn on
Yes it's already supported.
If you use (press) switches mode, you can choose (hold any press switch) option in the config button table, so you don't need a config button anymore, and holding any switch for 5 seconds will activate the config mode.
@@cadioHomeAutomationdo it supports config mode on light on off switch
@@cadioHomeAutomation nice 😍
Google home doesn't recognise Cadio fan as speed changeable device it only shows as switch
And in Alexa it is detected as dimmable led so you have to say change the brightness instead of change the speed
Any solution ?
Try saying:
Set fan to 50
Set fan to 100
HI , Please make a video about " unit license purchase" and if i buy one unit then how many esp32 i am able to connect it permanently .
egycad.com/cadio/docs/pricing/
@@cadioHomeAutomation dear i am not understand , if i use 6 ESP32 then how much i pay for this
@@cadioHomeAutomation that means one esp32 means 7$ and if you use 10 esp32 then it will be 70$
i want to switch from blink to cadio .
wow you did it!!
cadio is about to solve the problem of phone battery draining and mobile getting hot.
please update the cadio app opening system, becouse this is very slow. Tank you
CADIO Home Automation: Can CARDIO firmware be uploaded to Nodemcu Esp32 by smart phone?
We highly recommend using the esp flash download tool by espressif and flashing it using a pc.
Sir clap swich and mic sensor to control
I would appreciate it if you could tell me how to get the discount coupon code in your Permanent License Manager.
Hello sir, you can contact cadio@egycad.com for more information on this query
Sir I am waiting for your next video
When Will your next video come ?
Does not have a reverse function?🙄
The trial License is free and valid for 500 operating hours, and it can be renewed for an unlimited number of times by erasing and re-installing the firmware.
''it can be renewed for an unlimited number of times by erasing and re-installing the firmware.''
What's that mean?
It means you have to format the esp board with some flashing software or Android app. Then you just repeat installing cadio firmware again and you will be able to get 500 hours again
How to reconfigure the cadio switch
Erase then re-install the firmware
What amount we have to pay for full subscription?
egycad.com/cadio/docs/pricing/
configuration setting error message "GPIO Should not be dublicated" no english no arabic l am turkish help pls l am lisans account full 😢😢
Fan speed control using ir remote only on &off working but speed control not working
Fan speed control using IR and RF remotes is now supported.
are cadio work only on routeur wifi of home or i can make it work on my data conexion or airbox (flybox) wifi ?
and after 30 DAYS of utilisation of CADIO should i buy licence or no ?
and thank you 😍
Any wifi network.
@@yosrihadjali7573 egycad.com/cadio/docs/pricing/
It'll be perfect of it can do analog control output
You can use the DIMMER device type.
ruclips.net/video/xIzKyX_BOu0/видео.html&feature=share9
Can you please tell me how to upload code in SMD ....ESP32 SMD CHIP
Sorry, haven't tried it before
Can we use multiple esp with one cadio account??
Yes
I purchased one unit permanent license of your CADIO app. But my Nodmcu got wasted and my unity was deleted. Now how can I restore my permanent license in new Nodmcu. Please help me.😭😭
Hello sir, kindly contact cadio@egycad.com
Nice one
Thanks ❤️
Please update your cadio login interface. Because, this is very slow and and on off button touching fast . Tank you ❤
Awesome.
Please made a video on how we can increase the number of gpio pin in esp 32 🙏🙏🙏🙏🥺
will my permanent licence become useless or work if i update the firmware
The unit will never lose the permanent license is under any circumstances, even if you erase the firmware and reinstall it, the unit will automatically restore the permanent license once it connected to the internet
today i have taken permanent license thank you. CADIO
Thanks for support and your instant reply
Hi please make a video on how to read voltage
How to configure the gpio pin with cadio app
From the info file Interface, after installing the firmware
Hello sir , i want to buy subscription of cadio cloud but the problem is that i have no wifi network i want to connect esp32 using sim800l will you help me on it . That how i connect esp32 with cadio app using sim800l. There is no video on it .
Unfortunately sim is not supported yet
How do I factory reset Nodmcu?
From the esp flash download tool click erase
good but make a option of custom logo for paid cusomer
Hi sit why vedio has stopped uploading
How to fromat the nodmcu
Using "erase" option in the esp flash download tool
Please add nfc control