IoT Temperature Based Automatic Fan Speed Control & Monitoring System using ESP8266 & Blynk 2.0
HTML-код
- Опубликовано: 14 июл 2024
- Register and get $100 from NextPCB:
www.nextpcb.com/register?code...
PCB Assembly capabilities info:
www.nextpcb.com/pcb-assembly-...
𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻:
In this project, we will make Temperature Based Fan Speed Control & Monitoring System using ESP8266 WiFi Module & observe the data on IoT App Blynk. The fan speed increases based on the increase in temperature. The Blynk App will show the current temperature & Fan speed in percentage. Using the Blynk, we can also set the threshold value at what temperature the fan should turn ON.
To sense the room temperature, we will use a DS18B20 Waterproof Temperature Sensor. For the fan part, a 12V fan is perfect for this application as it is easy to control the speed with the PWM signal. The 16×2 LCD Display will display the instantaneous temperature and fan speed as well.
𝗦𝗼𝘂𝗿𝗰𝗲 𝗖𝗼𝗱𝗲 & 𝗪𝗿𝗶𝘁𝘁𝗲𝗻 𝗧𝘂𝘁𝗼𝗿𝗶𝗮𝗹: how2electronics.com/iot-tempe...
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: www.how2electronics.com
Facebook: / howtoelectronics
Instagram: / howtoelectronics
Twitter: / how2electronics - Наука
Very clear description of the coding on this. I find that really useful because most of the time people only tell you what to download.
how long did you take to do this?
I am thankful to you. you do so much hard work for us.💕💕
I am just waiting to this video 🎉
Thanks, works fine
Super project👍🏼 question: can you maybe next time make the wiring diagram with the "Fritzing Software" 🤔❓finde I easier to understand 😊
Sure thanks i will try next time. The problem here was not all the modules were available.
Nice tutorial
Já fez teste , de desligar e ligar Novamente a fonte da energia , pra ver o comportamento do funcionamento??
Nice project, can you next time setup a IoT based fruit Monitoring project using ESP8266 board.
is it working for you brother?
Great work sir.
What if i want to remove the iot features.
And the codes and components connection .
Very nice
Can we use oled display instead of 16×2 display module.?
Hi brilliant video ...what is the respose speed of this please ? i need to maintain a consistant water temp to 1 degree using a 12v water pump will this work ??
Well, I don't appreciate embedded ads ! Why you don't just put a note with a link in the description ?
How can we add a heating system tho? As well as keep the fan?
can you tell if there is potentiometer is used in this model ?and if yes ,where it is connected along?
plzzz
Nice
I'm a beginner, how do I make app in iOS and connect it to the Arduino?
GAURAV GHOSH
how long did you take to do this?
Can you tell me, this connection in breadboard
Sir please Tell that ....This project can use for Ac fans?
That’s a madam😅 and not sir
Just use a relay instead of the motor driver. If she uses a pwm then try changing it to digital on off.
Word of warning, give at least 200ms delay while turning on and off the relay.
is esp8266 digital pin able to open gate of irf540n please reply soon
Can we use nodemcu
What is the purpose of using power jack in this circuit
To provide power
Hi, can we use battery instead of a ac power adapter
Transformer
👍👍
i Neeeed this ….
I can't understand
Same macha
boli shede work aythilla
Budjett
Do AC 220v fan speed control using this method...????😂 On youtube Everyone do easy DC 12v unusable tiny fan speed control and make video.
There is no use of this fan .
You need triac to control the AC Fan
@@HowtoElectronics can triac control in this IoT temperature based controller .
I am using a manual triac speed controller.
I will make a video on that in a month. Please wait.
@@HowtoElectronics thanku very much.... waiting for video.
There is some error in the program
After compiling plz uplod the correct
We are making this project as our mini project in clg plz help
Can you tell me, this connection in breadboard