Coincidentally, I called with some of these questions on the same day this was posted and I can attest to the fact that the virtual hand-holding was incredibly helpful. Thank you.
One thing you should mention regarding shock fit/compatibility is that, in general, the orientation of the shock does not matter - either the front/back orientation or flipping it vertically. The dynamics are identical independent of the orientation. It may look a little odd, but you can fit some shocks with piggyback reservoirs in more bikes this way.
The more complex a rear suspension system is, the harder it is to upgrade to a better, compatible shock that is tuned or can be tuned the proper way. Then again, this is a great guide, thank you very much!
One point I've noticed for choosing between air and coil can be rider weight, which is especially important for very tall riders (i.e. people at the very limit of XL/XXL frame recommendations). Thanks to maximum recommended air pressures, air shocks have a maximum weight limit before sag simply becomes too much to ride with. With a coil shock, on the other hand, sag is dependent on the spring weight, and there are plenty (or at least enough) 700+lb springs available that would work for people too heavy to run air shocks.
I've been looking for the explanation given in 6:20 for like 2 weeks now, this is the third time I've found the information needed in your channel thank you!... besides you explain this in terms understandable for a mortal mtber like me.
I over-stroked my yeti during a lunch ride. Not only did my longer stroke length feel amazing for me but but it felt better for others as well. Finally with a longer stroke length I’m now able to stuff some shoots I’d never be able to reach the bottom of previously. It feels awesome ! 😜 but for the best feels...I'd highly recommend over-stroking your shaft while simultaneously under-tickling your seat tube.
Good point. Most videos talk about eye to eye sizes and stroke, but rarely somebody talks about the rear shock simply do not squeeze into my frame. I was negatively surprised when my new Fox shock did not fit due to LV and SV size difference. And there is very little info about that in general. Frequent rare issues, yes.
Wow, I saw the link to the new version on your old video, but I did not expect the new video to have literally come out today. What a coincidence, I suppose this is destiny
Really helpful video, Bought a frame with a busted Rockshox Ario and didn't know what to get until that whole part about what I felt was missing. Now I find myself in another rabbit hole trying to find a good and not wallet destroying 165mm rear shock.
Ohlins has a setup guide which advises which of their shock options are recommended for your specific frame and your rider weight.... it even gives you recommended volume spacer numbers and pressures......
I overstroked my giant trance... but I experimented a lot and ended up with a 2.5mm travel spacer over the stock 6mm spacer. With no contact under harsh bottom out/frame flex. Probably could have gone the full 6mm if I had been willing to live without the piggyback.
Have a 2020 Speicalized Levo SL with a FOX FLOAT DPS Performance, 3-position adjustment, 52.5x210mm, Rx Trail Tune and looking for something more tuneable and having less stiction. Assume the new FOX Float X will fit my Levo SL. Did get a FOX 36 Factory Fork from you a few weeks ago and absolutely love it. Now, need to bring the rear shock of my bike up to the level of its new fork.
Bought a 11-6 for my size S SB130 and had one of the high speed damper knobs take paint off the inside of my downtube. Push swapped out the knob with a low profile preset knob for free, but I wish they would have told me about this issue as they said they knew about the issue beforehand.
Well.....color me disappointed. I saw the first chapter and saw "Eye-to-Eye-----Stroke----then, Mount" and thought I was going to see a whole different type of flick. :-D Great video on shocks! Keep up the work.
As always great information, very informative (in a way a five-year-old could understand) which is exactly what I needed. My only question: When exactly did Jack Black join the Worldwide Cyclery team?
This is excellent thank you. I have an ohlins on my 2016 specialized enduro pro carbon and the seals are blown. It won’t hold pressure beyond a few days. Starting to look at replacement options.
Depends. Most of the time it would result in your tires rubbing to the seatpost especially when the axle path is forwards. At most, you can only get 20mm of wheel travel before you run into trouble and that's with backwards axle path.
@@SneakyB exactly! cause there are bike like the yeti which from factory offeres 2 versions the normal and the lunch ride which is just over shocked... or like my bike which is an intense primer (first gen) that you can go to a 200x57 shock and it gets you to 140 mm of travel that said it does require the "recluse link" to safely do this
Fox service website section, type in the 4 letter code on your current fox shock , and it will tell you the size and stroke , and what bike it came on. Such as KTM Prowler 230x65
When you find your measurements its written out like this e.g. 190x50mm or 7.5x2in (Eye length x Stroke length). You guys didn't mention that part. Now its easy to search which shocks are even compatible with your frame.
That feeling when there's sale and they have every size, except yours. Tip on newer Fox shocks, use the ID printed to the shock. Should have all needed info.
Awesome vid! You guys talked about over stroking but didn’t talk about under stroking. Is there a particular threshold that’s OK to move forward with. Specifically, i have a 190x51 shock on my bike (OEM) and am looking to replace and options I like only have 190x50. Is 1mm actually going to have significant impact in performance?
Yes. The stroke is directly related to how much travel the bike will have. So you absolutely have to get that right. If your stroke is less, you will have less travel. If your stroke is more, you will have more travel, potentially allowing the rear wheel of the bike to smash into the seat tube or the linkage to smash into itself. So in other words, it is imperative to get the stroke right.… That last part is also what she said.
My 2014 Santa Cruz Tallboy LTc with a Cane Creek double barrel air shock only requires 140 psi to support my weight, but my 2020 Ibis Ripmo with a Fox Float X2 requires over 300 psi! Why do I need twice the pressure on such similar bikes?
Great advice, thank you. I’ve just bought a 2020 S2 Stumpjumper carbon 29’er. Limited Edition Troy Lee Designs, it came with a Fox DHX2 coil 500lb. I feel a could go with a 450 (I’m 69kg - 152lb) Any advice? This video was super helpful but are there any other SJ riders here using coil that can share their experience? Thanks in advance 🤘🏽
Just a point that they don’t cover … under stroke??? For instance…. 205x65 but they have installed 205x60 ! Less travel?? Is it ok to under stock your shock/ bike???
What do you think of the EXT Suspension Storia LOK V3? I’ve seen you displayed it on the UNNO, so how do you like it? I’m riding it in my Nukeproof Mega with a custom tune for my frame and style of riding and it’s THE absolute best shock I’ve ever ridden! Makes my Mega more plush and capable than my older DH bikes all while still having amazing amounts of pop and insane climbing abilities!
would anyone please let me know does 230/60 is compatible with Remedy 7 2020 or i will mess up the geometry? the stock version is 230/57.5. can't find anything on trek's website
i bought a new shock of trade me for 300 dollars a fox dpx2 and i did the measurements wrong, and when i got it, it did not fit the mounting bit at the top was wrong, and now im down 300 dollars.
One thing that has been a major point of confusion regarding compatibility: how does shock tune have to do with it? For example, I have a rascal with the stock super deluxe select. I've been considering getting something with more knobs or a coil or something in the long term. But even if I wanted to just buy a super deluxe ultimate which the bike can come stock with, can I just buy one and slap it on the bike or do I need to take it somewhere to get it tuned like it would be from factory? If I don't, what problems can I run into?
Most of the time when looking for a new shock going with a Medium Compression and Medium Rebound tune will be very close or exactly what the stock bike is spec'd with. There are a few shocks that are tuned pretty far out from that spec so to be sure I would contact the frame manufacture, or look up what the stock shock is by entering a code online or calling the manufacture of the shock and giving them the serial number. For a Rascal you can do the M/M tune of an off the shelf shock and it will feel great. If the bike has a really specialty tune then I would contact the brand or a shock manufacture for more info.
Hi worldwide Is it possible for you to make a video on how to allign the circular washers when reinstalling shocks and pivot bolts. I am finding it extremely difficult to do
When will I be able to get my hands on the screw on fender for my?? Rockshox SID Ultimate Race Day - Crown 29" Boost 15x110 120mm Gloss Black 44 Offset Tapered DebonAir, Maxle Stealth C1
Hey guys! Awesome advice all the time. I am riding an older 2011 Norco Range 2 with a Rockshox Monarch rt3 8.5" /2.5" rear shock. I want to go coil. What coil shock would you guys recommend. Cheers
Hello I’m new to mtbing. I just picked up a 2024 polygon D6 and I wanted to upgrade rear shock and I know the one on the bike is 190x45 but I can’t seem to find that size I can only really find 190x50/51. Can I use this size and do you have any recommendations? Thank you and keep them videos coming
What shock are you currently running? Let us know!
My legs haha, but hopefully soon a Rockshox Deluxe on an Evil.
You two have very different heads.. LMAO
im currently running a rockshox super deluxe select +
When is the review of the new float X? Thanks
DPX2 factory but wanna get rid of the Kashima, don't like the looks of it. Super Deluxe incoming!
I got a shock recently when my wife left me - I consider this to be a substantial upgrade.
Watch the section on compatibility issues? 😊
😂
This is unbelievable ,I’m using hard tail and road bike, but I’m keep watching this two funny guy anyway thanks for your tips 🚴♂️🚴♂️🚴♂️
Coincidentally, I called with some of these questions on the same day this was posted and I can attest to the fact that the virtual hand-holding was incredibly helpful. Thank you.
One thing you should mention regarding shock fit/compatibility is that, in general, the orientation of the shock does not matter - either the front/back orientation or flipping it vertically. The dynamics are identical independent of the orientation. It may look a little odd, but you can fit some shocks with piggyback reservoirs in more bikes this way.
You guys are awesome, I ride road bikes but love the videos for the comedic effect you guys pull off
Blowing through travel and blowing minds🤯
The more complex a rear suspension system is, the harder it is to upgrade to a better, compatible shock that is tuned or can be tuned the proper way. Then again, this is a great guide, thank you very much!
Can you do upgrading your fork? I really like this channel! You talk and mention everything as good as experts. Thanks
We did a video on forks already 😁 - ruclips.net/video/mkSKadeSKTc/видео.html
One point I've noticed for choosing between air and coil can be rider weight, which is especially important for very tall riders (i.e. people at the very limit of XL/XXL frame recommendations). Thanks to maximum recommended air pressures, air shocks have a maximum weight limit before sag simply becomes too much to ride with.
With a coil shock, on the other hand, sag is dependent on the spring weight, and there are plenty (or at least enough) 700+lb springs available that would work for people too heavy to run air shocks.
I've been looking for the explanation given in 6:20 for like 2 weeks now, this is the third time I've found the information needed in your channel thank you!... besides you explain this in terms understandable for a mortal mtber like me.
so glad they made this video. Only took me over a month to finally get proper information to have confidence in picking out a new rear suspension.
I over-stroked my yeti during a lunch ride. Not only did my longer stroke length feel amazing for me but but it felt better for others as well. Finally with a longer stroke length I’m now able to stuff some shoots I’d never be able to reach the bottom of previously. It feels awesome ! 😜 but for the best feels...I'd highly recommend over-stroking your shaft while simultaneously under-tickling your seat tube.
Good point. Most videos talk about eye to eye sizes and stroke, but rarely somebody talks about the rear shock simply do not squeeze into my frame. I was negatively surprised when my new Fox shock did not fit due to LV and SV size difference. And there is very little info about that in general. Frequent rare issues, yes.
Wow, I saw the link to the new version on your old video, but I did not expect the new video to have literally come out today. What a coincidence, I suppose this is destiny
Really helpful video, Bought a frame with a busted Rockshox Ario and didn't know what to get until that whole part about what I felt was missing. Now I find myself in another rabbit hole trying to find a good and not wallet destroying 165mm rear shock.
Guys, I'm just Shocked by your advice 😱🤘👊😀😜
Jeff talks the most, but you can tell Jared is really the star of the show.
Not really looking to upgrade my shock but... it’s fun watching you guys and I am learning stuff.
"Chances are, if you are trying to do it, and no one else has done it before, you probably shouldn't do it."
That is some sage advice.
If you're trying to out-think the designer... what does that say about his design to begin with?
Nice thinking about buying an new shock
I wouldn't mind looking like Jared one day. I like his shirt a lot
Straight FIRE
Ohlins has a setup guide which advises which of their shock options are recommended for your specific frame and your rider weight.... it even gives you recommended volume spacer numbers and pressures......
I over stroke by 2.5 mm. You can test the clearance issue by taking out all the air and compression the suspension.
I overstroked my giant trance... but I experimented a lot and ended up with a 2.5mm travel spacer over the stock 6mm spacer. With no contact under harsh bottom out/frame flex. Probably could have gone the full 6mm if I had been willing to live without the piggyback.
Just upgraded my Rocky Mountain altitude with a fox float x2 factory today. Absolutely love it!! 🤩🤩
Sweet, just came from the fork upgrade video.
dynamic duo
Jared, show me your sweater vest!
Have a 2020 Speicalized Levo SL with a FOX FLOAT DPS Performance, 3-position adjustment, 52.5x210mm, Rx Trail Tune and looking for something more tuneable and having less stiction. Assume the new FOX Float X will fit my Levo SL. Did get a FOX 36 Factory Fork from you a few weeks ago and absolutely love it. Now, need to bring the rear shock of my bike up to the level of its new fork.
Bought a 11-6 for my size S SB130 and had one of the high speed damper knobs take paint off the inside of my downtube. Push swapped out the knob with a low profile preset knob for free, but I wish they would have told me about this issue as they said they knew about the issue beforehand.
This video is helpful I want to replace mine because it’s clapped.
Haven't heard of the clap in that context. Does it mean the shock has totally failed?
Damn McClure they came out with this right after you got yours
There are progressive coil springs, best of both worlds for linear designed frames
what happens to your push industries shock when you end up losing 20lbs? is it then useless to you?
You would send the shock in and have then re-tune it.
@@alanbachman6453 well that sounds easier than loosing the 20lbs to start with.
That's right
Well.....color me disappointed. I saw the first chapter and saw "Eye-to-Eye-----Stroke----then, Mount" and thought I was going to see a whole different type of flick. :-D
Great video on shocks! Keep up the work.
As always great information, very informative (in a way a five-year-old could understand) which is exactly what I needed.
My only question: When exactly did Jack Black join the Worldwide Cyclery team?
Over stroking can be solved my mulleting your bike
Ya'll are a hoot! On a serious note good info.
This is excellent thank you. I have an ohlins on my 2016 specialized enduro pro carbon and the seals are blown. It won’t hold pressure beyond a few days. Starting to look at replacement options.
This video was so so helpful like wow all my questions are answered. kinda disappointed I'm stuck with 120mm travel on the rear forever though :/
i love his ymca moustache
Any review on Megneg ?
I can review it in 3 words... It's WAY better
What you can overstroke your shock?😱 than I can overfork my bike with like 30mm with no problems! Mega🤩
No they said u shouldn't do it
Depends. Most of the time it would result in your tires rubbing to the seatpost especially when the axle path is forwards. At most, you can only get 20mm of wheel travel before you run into trouble and that's with backwards axle path.
Nope
@@SneakyB exactly! cause there are bike like the yeti which from factory offeres 2 versions the normal and the lunch ride which is just over shocked... or like my bike which is an intense primer (first gen) that you can go to a 200x57 shock and it gets you to 140 mm of travel that said it does require the "recluse link" to safely do this
You can do it, fitting offset bushings
PERFECT!!
I see Mario, but what the heck did they do with Luigi?
HARDTAIL FTW!
Fox service website section, type in the 4 letter code on your current fox shock , and it will tell you the size and stroke , and what bike it came on. Such as KTM Prowler 230x65
THAT'S RIGHT
When you find your measurements its written out like this e.g. 190x50mm or 7.5x2in (Eye length x Stroke length). You guys didn't mention that part. Now its easy to search which shocks are even compatible with your frame.
nice vid!
Love overstrocking my shock
Please do a coil shock comparison, I’m searching for a replacement of my rockshox super deluxe 😁😁
Fox dhx2
Meg neg
Damn I wish I'd seen this video before buying a rear shock last year 😳😅
You were great as Bilbo Baggins in Lord of the rings
That's right.
You guys are hilarious 😆! I may have no interest in the topic, still love your videos.
I’m almost in the sweet spot in my bike setup. Rebound is still something I’m struggling with. I’m close but...
That feeling when there's sale and they have every size, except yours.
Tip on newer Fox shocks, use the ID printed to the shock. Should have all needed info.
... right! 62.5 on new foxes and no 65 option unless you send it to fix for an extra $130. I literally went with a rockshox for that single reason
Dude with the hat look like Nacho Libre! Lol!
So much going on here. The mustache. The poofy hair. The flat brim hat. The chest hair. 😁
My 2021 Norco Fluid FS3 has a 190 x 45 Xfusion shock. What you recommend upgrading to
Never, over stroke. Facts.
Awesome vid!
You guys talked about over stroking but didn’t talk about under stroking. Is there a particular threshold that’s OK to move forward with. Specifically, i have a 190x51 shock on my bike (OEM) and am looking to replace and options I like only have 190x50. Is 1mm actually going to have significant impact in performance?
Weird question, love the new Ketl shirt Jared is wearing, is he willing to share what size he is wearing and maybe his height/weight?? kthanksbye
THey said it last time, it's the sun hoody or something
All the info on it + sizing details is here 😎 - ketlmtn.com/products/nofry-sunhoodie
I have that sun hoodie, thing is sweeettt.
@@175thStreet Me too! It's rad!
I hate the air suspension on my emtb. I wish it had progressive coil.
I own a hard tail, still enjoyed the video haha
I got lucky and switching from rockshox to fox I used all my old shit
Ayeee fellow ashevillain!
Santa Cruz have a great website
next episode will we get a "that's right" counter? editor?
I’m upgrading because I have a Trash shock
Will a 185x50 fit on my Schwinn hardtail?
Yes
Couple of zip ties will set you right.
Is the stroke really like "useful"? Is it bad when you buy same eye to eye but different stroke? Let me know please!
Yes. The stroke is directly related to how much travel the bike will have. So you absolutely have to get that right. If your stroke is less, you will have less travel. If your stroke is more, you will have more travel, potentially allowing the rear wheel of the bike to smash into the seat tube or the linkage to smash into itself. So in other words, it is imperative to get the stroke right.… That last part is also what she said.
Yo Jared good seeing u at sky park 😁
That's right!
Rare compatibility issues.... X-fusion P1-RL. I know ancient, but even worse it's not a direct compression type shock
........that's right........LOL Jared's the best!
You missed a "that's right" at 11:04
My 2014 Santa Cruz Tallboy LTc with a Cane Creek double barrel air shock only requires 140 psi to support my weight, but my 2020 Ibis Ripmo with a Fox Float X2 requires over 300 psi! Why do I need twice the pressure on such similar bikes?
Great advice, thank you. I’ve just bought a 2020 S2 Stumpjumper carbon 29’er. Limited Edition Troy Lee Designs, it came with a Fox DHX2 coil 500lb. I feel a could go with a 450 (I’m 69kg - 152lb) Any advice? This video was super helpful but are there any other SJ riders here using coil that can share their experience? Thanks in advance 🤘🏽
Just a point that they don’t cover … under stroke??? For instance…. 205x65 but they have installed 205x60 ! Less travel?? Is it ok to under stock your shock/ bike???
Maybe easier to rebuild and instal upgraded guts in your stock suspension? Is that a thing?
That’s right!!!
What about upgrading the frame on your shock 🤔
knowledge and funny keep it up
When upgrading you need to match the same shock sizes correct?
What do you think of the EXT Suspension Storia LOK V3?
I’ve seen you displayed it on the UNNO, so how do you like it?
I’m riding it in my Nukeproof Mega with a custom tune for my frame and style of riding and it’s THE absolute best shock I’ve ever ridden!
Makes my Mega more plush and capable than my older DH bikes all while still having amazing amounts of pop and insane climbing abilities!
Shocks go boing boing boing boing!!
would anyone please let me know does 230/60 is compatible with Remedy 7 2020 or i will mess up the geometry? the stock version is 230/57.5. can't find anything on trek's website
i bought a new shock of trade me for 300 dollars a fox dpx2 and i did the measurements wrong, and when i got it, it did not fit the mounting bit at the top was wrong, and now im down 300 dollars.
Jeff oughta spot a 'stache too. Just saying.
One thing that has been a major point of confusion regarding compatibility: how does shock tune have to do with it? For example, I have a rascal with the stock super deluxe select. I've been considering getting something with more knobs or a coil or something in the long term. But even if I wanted to just buy a super deluxe ultimate which the bike can come stock with, can I just buy one and slap it on the bike or do I need to take it somewhere to get it tuned like it would be from factory? If I don't, what problems can I run into?
Following @worldwidecyclery
Most of the time when looking for a new shock going with a Medium Compression and Medium Rebound tune will be very close or exactly what the stock bike is spec'd with. There are a few shocks that are tuned pretty far out from that spec so to be sure I would contact the frame manufacture, or look up what the stock shock is by entering a code online or calling the manufacture of the shock and giving them the serial number. For a Rascal you can do the M/M tune of an off the shelf shock and it will feel great. If the bike has a really specialty tune then I would contact the brand or a shock manufacture for more info.
Custom service was good
Hi worldwide
Is it possible for you to make a video on how to allign the circular washers when reinstalling shocks and pivot bolts.
I am finding it extremely difficult to do
When will I be able to get my hands on the screw on fender
for my??
Rockshox SID Ultimate Race Day - Crown 29" Boost 15x110 120mm Gloss Black 44 Offset Tapered DebonAir, Maxle Stealth C1
Hey guys! Awesome advice all the time. I am riding an older 2011 Norco Range 2 with a Rockshox Monarch rt3 8.5" /2.5" rear shock. I want to go coil. What coil shock would you guys recommend. Cheers
I want to upgrade my current 150mm shock from rockshock to a 160mm rockshock and I dont know if I can do it
Hello I’m new to mtbing. I just picked up a 2024 polygon D6 and I wanted to upgrade rear shock and I know the one on the bike is 190x45 but I can’t seem to find that size I can only really find 190x50/51. Can I use this size and do you have any recommendations? Thank you and keep them videos coming
Would i benefit of the rear suspension when i am 250lb, riding just light terrain and standard roads? I currently have the hard tail bike.