I’ve been trying to aim my lights for the past 10 months with no luck. All I can do is rotate a beam adjustment screw a little bit and do a road test on the way to work. I don’t have a wall and 25ft of level ground.
We recommend going to your local Firehouse, and asking them if you can utilize their doors and ramp to aim your headlights if you can't find anywhere else!
Cannot adjust my headlights on my 3.6 gas gladiator. Cannot get to the adjustment screws while headlights are installed. Only way to access them is to remove the headlights, which seems a little goofy to me.
Hey there! Sorry about that! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Your not alone. Trying to adjust mine and have to pull the lights out to adjust them. Seems a little strange to me. Hopefully gen 2 will have adjustment screws accessible from the top so they can be installed amd then adjusted
just installed these on my gladiator and they are accessible but barely. the driver side reachable using the supplied key tool just may need to move factory harness and inch or so to help align the tool, passenger side is way easier but you will need to remove the 10mm bolt hold factory air cleaner box in place and just pick up on that end of the box. Their is enough play in the intake hose to be able to move the box with out have to disconnect the hose. Hope this helps!!!
Our production team is working hard to assemble, test, and pack the lights so they can be shipped to you as fast as possible! We appreciate your patience!
I received mine last Friday, got them installed finally yesterday. I think I don’t have the bolts tight enough though because I can only see about 15’ in front of the Jeep, anything beyond that is blacker than black. Headlight seemed tight, didn’t want to overtorque the bolts. Don’t know what torque spec is
Sir, I really want to join your team I have mailed too but they haven't replied. I want to share my passion and skills with a high quality and standard team like diode dynamics.
I’ve been trying to aim my lights for the past 10 months with no luck. All I can do is rotate a beam adjustment screw a little bit and do a road test on the way to work. I don’t have a wall and 25ft of level ground.
We recommend going to your local Firehouse, and asking them if you can utilize their doors and ramp to aim your headlights if you can't find anywhere else!
Cannot adjust my headlights on my 3.6 gas gladiator. Cannot get to the adjustment screws while headlights are installed. Only way to access them is to remove the headlights, which seems a little goofy to me.
Hey there! Sorry about that! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Your not alone. Trying to adjust mine and have to pull the lights out to adjust them. Seems a little strange to me. Hopefully gen 2 will have adjustment screws accessible from the top so they can be installed amd then adjusted
Same, i can get the drivers side with a ratchet but the passenger side has to come out. They should have come with a 90 degree adapter
Because its a Chrysler😆
just installed these on my gladiator and they are accessible but barely. the driver side reachable using the supplied key tool just may need to move factory harness and inch or so to help align the tool, passenger side is way easier but you will need to remove the 10mm bolt hold factory air cleaner box in place and just pick up on that end of the box. Their is enough play in the intake hose to be able to move the box with out have to disconnect the hose. Hope this helps!!!
very informative! i'll use this for my new Elite Max JT headlights :)
Oh yeahh!!!! 🤘🤘🤘
Are the lights shipping yet?
Our production team is working hard to assemble, test, and pack the lights so they can be shipped to you as fast as possible! We appreciate your patience!
I received mine last Friday, got them installed finally yesterday. I think I don’t have the bolts tight enough though because I can only see about 15’ in front of the Jeep, anything beyond that is blacker than black. Headlight seemed tight, didn’t want to overtorque the bolts. Don’t know what torque spec is
Sir, I really want to join your team I have mailed too but they haven't replied. I want to share my passion and skills with a high quality and standard team like diode dynamics.
Hey there! You can apply online here:
www.diodedynamics.com/careers