they usually show the web that spiderman swings from is actually multiple strings wrapped around each other, and when it latches on to something the ends spread out to hold on to more of that surface. So if you figure out how to make that effect you won't need an anchor in the future, other than that great job.
stfu you fucking weirdo respectfully. acting like no one serious actually know physics?? why tell an electronics tech or an engineer what you prefer? respectfully brother, because you don’t know at all what you’re talking about, no actual engineer will hear you out. you want to go prove you can make a better one??? no??? then respectfully sit down and be quiet.
Something to consider is that when you add swinging into the mix your anchor will need to be a lot stronger than if you're just hanging. As an aerialist all of our safety equipment is tested at 5k+ lbs of force (since a aerialist dropping 20-30 feet can exert about half that)
@@rylanmallais2377 holding a small amount of weight many different times without breaking is much different than holding a ton of weight for a short amount of time, its almost easier
@@beebum272 true but the act it could hold him multiple times means it probably could hold quite a bit more for s short period, that being said i know its not a very reliable answer but for what we have right now it should suffice
Every time I check for "real web shooters" I see some improvement over the years. Back in 2015 I remember a viral video of someone who could shoot webs that looked like Spider-Man but couldn't hold their weight, now around 10 years later the community has finally overcome that. I wonder what you'll do next! Soon you'll be swinging from building to building!
This is just strait up cool. Smart move to create a platform for further development instead of reinventing the wheel for each iteration. Should mean we'll get to see cooler stuff sooner. Good luck.
I think the best part about these kinds of invention-style videos is that there's always the comments section to help give constructive advice and suggestions, really brings the whole community together
This is insanely sick considering I’ve always heard that replicating peter parkers web shooters would be “impossible” awesome to see that turn more into a possibility with each of these cool designs!
it will prob take one century before we replicate an exact copy,it is complicated,dangerous,and much more,the major factor is the safety,cause ofc,shooting webs is already fun and safe,but if we want to swing we need to make it safe,cause if u just slam to a wall,well,goodbye
7:55 i guarantee it's possible for you to do. Amazing work as always also i've realized ive been watching your vids for months and never subscribed, i had to fix that
Awesome job Joel! Suggestion: Use a mesh of nylon rope saturated with the glue. Instead of your anchor being a solid piece of metal it would be a complex knot covered in glue. When it sticks to a surface it hits and spreads out. The difficulty will be spreading the force out evenly over the glue rather than pulling on a single point at once. Some sort of slipknot like structure that dynamically adjusts to whatever surface/angle you hit could work.
@@JoelCreates unfolding Wire mesh sabot with a hot glue slug inside the cartridge. Induction heating would only need to heat the tip where the slug is.
To simplify: in engineering, if it can go wrong, it goes wrong. I wish more people would show that side of engineering. It's not all sunshine and rainbows, and that's why not as many people do it. You'll fail, probably a lot. It happens. Thanks for the amazing video.
@@solarsynapse yes but its worth it since seeing your creation ACTUALLY working will inspire you to make more creations! Maybe even some being actually helpful!
All of this started out of spite lol. Great work Joel! Edit: I’ve seen other creators make geckotape and even that couldn’t hold near this much weight. Really impressive stuff.
You should look into the spring loaded arrow heads that open upon impact like the old reaper heads it could help with launching the plates later on. This is super cool btw.
I dont think that would work on bricks, bud. Even if the arrow could penetrate at the speed it would shoot, the plates on the sides of the head would need to be extremely powerful in order to force outwards through the stone. Although it would be an amazing idea.
if u traveled back in time people there would be super surprised about things u have rn like your mobile phone it's just a small thing wich contains a lot of possibilities
I would imagine a more malleable mesh for the anchor at the end of the rope for fitting it into the tubing. Finding something that could be strong enough and malleable is gonna prove pretty difficult though. GL! Hope to see the progress. Maybe something like a origami chain mail solution? Also have you considered using like a neutral temperature adhesive and coating the mesh on the end of the rope in it?
Hey man, quick question. Have you considered building the platforms similar to a bullet? With the glue head in the front, and a collapsible umbrella style metal mesh behind it? Can be launched with a compressed air charge, potentially part of the bullet, and should be able to glue, stick, and swing in 1 round as long as the glue dries quickly enough. Look into it? I don't have the resources to do it myself. Thanks and good luck.
@@kilovwdude6457 he got got the resources. Also sounds dangerous. What if the glue doesn’t dry fast enough. A hot glue on rounds sounds interesting though
This is really cool. I love how making Spider-Man webshooters a reality has brought so many different creators and ideas to the table, and it's amazing to see how close this web of creativity has come to turning fiction into reality.
Make the web anchor collapse into the CO2 cartridge and then when its fired the outward pressure of the co2 would cause it to "Blossom" open like a flower, or a net, or a hollow point round. If the anchor is metal and inside the co2 cartridge, then the glue could be pre placed/heated in the center. Not sure if that's the best description of the idea. But I'm sure by now, you've come up with an idea way better.
Andrew: i spent so much time developing my webshooters. Tom: you still use your selfmades? I have some made by tony stark. Tobey: you guys use webshooters?
It’s insane to me that this exists. I watched a video last night of a guy using suction cups to climb a building. You guys are 3 regular people, just fans with some serious intellect who’ve made a sci-fi action franchise closer to reality just on a whim & dream! Kudos to all your effort, your work though it may be criticized from the scientific community or the public at large will live on in the domain of public opinion & us nerds & geeks alike as a testament to how formidable the human spirit can be. This is extremely impressive & although you will have/had days where you thought of the fact that scenes in film depict trial & error in the form of a montage your whole video shows that same thing. It maybe 8+ minutes for us? But your dedicating so much time & effort into this & we thank you. Please keep going & remember for all human history you shall be remembered as a pioneer & what a common human can do to pushing the limits of human ability. This is generation 1, if you produced an offspring & taught them this & they carried on your legacy?? Imagine Gen 10!! From the mind of two guys making comic books dreaming up their wildest dreams, in a few centuries there could ACTUALLY be a Spider-Man. That. Is. An. ABSOLUTELY INSANE concept to envision. But it’s 100% in the realm of possibility. Imagine 300 years ago my ancestor living in a teepee envisioning me tapping into my iPhone a comment on a RUclips VIDEO sending this message of hope directly to you instantaneously at the click of an arrow. Then connecting with my family in a moment just as quick or ordering any type of food to my house, a car to pick me up, sounds transmitted to my airpods for hours on end & me working from my laptop that’s barely the thickness of a hide they used to cover with. That would be extremely alien & science & technology advances so much more exponentially every day. I cannot begin to express my profound respect for you & you work.
I absolutely love when makers make videos like this dissecting their designs into simple pieces to understand, great job Joel! Both on the video and the build!!!!
What if there was like a mesh of thin rope in with the hot glue, maybe attached to some ball bearings for weight, and they shot out and you could have it drag the rope behind. You could also team up with JT since he has experience with grappling hooks and having projectiles pull ropes
wow, super impressive. i thought this had been done to death online, but heating the cartridges through the belt, fully mechanizing the shooter, the quick change valves, all of it were really good. excited to see where your brain takes you from here, you're clearly looking at it from a different perspective than a lot of other youtubers
SPIDER-TECH SPIDER-TECH SO INTELLIGENT HE COULD BUILD A MECH SPINS A WEB ANY SIZE CATCHING VIEWS JUST LIKE FLIES WATCH OUUUUUUUT HERE COMES THE SPIDER-TECH!
For your anchor, an idea I'm sure you already thought of would be to make cuts kind of like slices of pizza so that it could essentially fold in on itself and be compactbut then when shot it would need to spring back in to shape as it's being hurled through the air. I thought that anchor system you had was just absolutely brilliant
Wow! This is really cool. It's even cooler that different RUclipsrs are working together. I'd love to see just how far this goes. Maybe some day, through your combined efforts, we will see a Spider-Man movie using practical webshooters that are 100% real based on ground work made by fans like you.
Awesome! Amazing how you built all of this first try without making even a single mistake and you were able to get this video out to us so soon after the last web shooter video! Joel is the undisputed master of this field
Have you tried experimenting with 2-part epoxies? For example, if it says 2 drops of hardener and you put in a bunch, epoxy can get *really* hot and set in seconds. Switch the cartridge for two compartments of carefully-selected sizes, and a mixing nozzle. The nozzle may quickly clog, but disposable one-off cartridges or easily replaceable nozzles could sort that.
Hell yeah. Always been a fan of the traditional mechanic of how a webshooter functions, with fluid and a valve system, not those spring and wire crap that's getting popularity. You guys got my full support in this.
This is super cool. The idea of using the glue with mesh grill to hold on to it is just perfect. If you want to integrate both of them in the same time, why dont you use the induction coil to heat up the mesh grill that is pre coated with the glue in a casing or something that releases its stickiness on impact!
May need to have a collapsible version of the mesh so that it takes up less space? Then when fired expands, maybe using centripetal force to spread out the mesh ?
@@Scott_C oh yeah. I thought of a simple umbrella like mechanic. Like there’s a peg at the front that when push, also pushes out the mesh outward. I have a design in mind but not sure how to share it.
@@Scott_C i don’t want the mesh to be wide open when fired caused it might not fly towards the target nicely as the mesh will have too much resistance.
Awesome! For 40 years I've dreamt of doing whatever a spider can, like my all time favorite fictional hero. I'm probably too old now, but I sure hope you guys are able to live the dream.
This is so amazing! I do have a suggestion on how you might be able to use one wrist for your glue cartridges and another wrist for your rope and anchor. In order to swing multiple times you would have to have a rotate-able wrist piece for multiple different anchors and ropes which would automatically rotate after the previous shot was fired and released. This would allow you to shoot the glue with one hand and the rope with the other and hold onto the rope while you swing to shoot the glue for the next rope to attach to. In order for you to be able to swing using both hands you would have to have the anchor and rope mounts on both wrists and glue mounts on both wrists which may prove problematic 😬☹️ I hope this helps out in any way!
I went into this video thinking ``A geez, another youtuber trying to make a web shooter´´, and oh man, I was wrong. The web shooter looks awsome, and its not junky or too heavy like other peoples attepts at making one, I´m honestly amazed, well done! And also, the belt and the heating mecanics are brilliant!
i would suggest using small, but very sturdy hinges on the mesh plate. fold the plate inwards so when the cartridge propels the mesh and glue, it also opens up, thus sticking to the wall with the glue. just an idea
It has always been my dream to not only build web shooters like you, but to be able to use them in the real world. How far the engineering world has come is truly incredible, and I can't believe we have come this close to being able to swing like the iconic comic book character that spiderman will always be
You could make your anchor like a flower, with the “bud” at the front of the projectile and the petals hinged and tucked back like a slimmer shuttlecock, then you could load that in your hot glue chamber (with the glue already heated and coating the mesh) so when the projectile is fired and the bud contacts a surface, the petals would fling forward and expand outwards into your current shape. Your rope could be a slimmer wire, maybe a few platted lengths of deep sea fishing wire (rated for massive fish or possibly medium sized adults haha), set up on a spool on your belt and fed up a thin but rigid pipe to your wrist. That would be what I’d try next if I was in your shoes. I’m not a maker, just thought I’d add a different perspective
Hell yes! I thought this project was gonna stay on the sticky side exclusively for the next couple years but you've done it already! I'm proud of you bro!
I'd love so much for this to become a big world event, the Web-Shooter challenge, a bunch of designing channels getting on the "let's make the spider-man web-shooter a thing and all collaborate in our own way" train to the point of having Sony/Marvel eventually officially getting involved!
Totally agree.... there's so much talent out here especially our kids.....so yes web shooter challenge .... let's have fun changing the work bringing fiction to real life
Domino Effect Meme: the smallest domino reads "YT user @Fk_F comments on a Michael Reeves video" and the largest domino reads "The realization of Spider-Man's technology IRL"
Hot glue “paintballs” inside of a foldable glue anchor kinda makes it so you could attach it to anywhere. You’d have to figure out how to launch the anchor and ropes, come up with a way you make the anchor deploy and strike a surface hard enough to spread the glue and get a good enough stick. Sounds like a tall order though
You could possibly use a spring loaded fold up version of the metal web bracket. Possibly folding into the canister right behind the glue! I’m sure you’ve already though of this trough haha
definitely worth taking another step, man. spiderman is my favorite superhero and it pleases me so much to see such talented people trying to get close to the tech that he uses on a regular basis. maybe someday, the stepping stones you're creating is what might make the actual webbing tech come to reality.
"This character is so inspiring, and your hand is so talented. I will definitely make a video of the process of making a cement works on my channel. "..
It’s an amazing feat to accomplish for sure. All the work you have done is already bringing you that much closer to making the real thing. It is so cool, thank you for bringing spider man that much closer to reality
like it's a childhood dream to swing like spiderman so beeing able to create something like that, i would be in paradise!! Good work and it's really insane man!!
I love that there’s this whole community on youtube thats grown around making webshooters a reality
That's a fact me too bro me too
Same
Ikr
Kizit
Same. They might actually do it, too!
@@ivoryas1696 Here’s to hoping! I’ve always wanted to make a video about it but I’m not smart enough lol
Brilliant work mate, I look forward to seeing where this idea can go if you stick with it!
I sure hope he *sticks* with it
PREACH
Appreciate it man, you really inspired me to swing for the fences!
Beans
Good pun
Makes me happy to know that I'm not the only one almost killing myself with a CNC machine. Thank you Joel!
Ayy hello!
fancy seeing you here joel
Can we get a rocket powered spiderweb shooter? No idea what that even means but..
I swear they are secretly out to get us!
And he's not kidding I've seen it.
YOUR rockets are to die for. Lol
Absolutely love you work inegza.
awesome prize give aways.
🍅🍅🍅🍅
they usually show the web that spiderman swings from is actually multiple strings wrapped around each other, and when it latches on to something the ends spread out to hold on to more of that surface. So if you figure out how to make that effect you won't need an anchor in the future, other than that great job.
stfu you fucking weirdo respectfully. acting like no one serious actually know physics?? why tell an electronics tech or an engineer what you prefer? respectfully brother, because you don’t know at all what you’re talking about, no actual engineer will hear you out. you want to go prove you can make a better one??? no??? then respectfully sit down and be quiet.
Bro this is crazy!!! Such a killer concept, I can’t wait to see what you do with those anchors next
Hey Louis love your vids
Dudes, by the end of all this, you guys are gonna get invited to join the Spider-Verse
I also can't wait for another Web shooter
Jesus loves you all very much repent and believe onto Him and be saved from eternal punishment of sin amen, Jesus DIED for you
THE LIKES
My dream has always been able to swing like Spider-Man. Amazing 👏🏽
I still remember the drive home from the first Tobey Maguire spiderman movie
@@JoelCreates lucky
pun intended?
ayyy gento🤩
S
Something to consider is that when you add swinging into the mix your anchor will need to be a lot stronger than if you're just hanging. As an aerialist all of our safety equipment is tested at 5k+ lbs of force (since a aerialist dropping 20-30 feet can exert about half that)
okay but 14days worth of hanging before breaking and theyre planning on them being 1 time use
@@rylanmallais2377 holding a small amount of weight many different times without breaking is much different than holding a ton of weight for a short amount of time, its almost easier
@@beebum272 true but the act it could hold him multiple times means it probably could hold quite a bit more for s short period, that being said i know its not a very reliable answer but for what we have right now it should suffice
Every time I check for "real web shooters" I see some improvement over the years. Back in 2015 I remember a viral video of someone who could shoot webs that looked like Spider-Man but couldn't hold their weight, now around 10 years later the community has finally overcome that. I wonder what you'll do next! Soon you'll be swinging from building to building!
This is just strait up cool. Smart move to create a platform for further development instead of reinventing the wheel for each iteration. Should mean we'll get to see cooler stuff sooner. Good luck.
Straight
@@lordofCottonFeilds Str8
This is so awesome. Keep it up! The world needs this
*gasp* you are that guy who gives pizza at the end of gameranx videos and your favorite game is Metal Gear Solid!!!!
still waiting for the pizza jake...😒
No shot 😂
Jesus loves you all very much repent and believe onto Him and be saved from eternal punishment of sin amen, Jesus DIED for you
ruclips.net/video/JfbyiPaurlM/видео.html 🕷️💜
I think the best part about these kinds of invention-style videos is that there's always the comments section to help give constructive advice and suggestions, really brings the whole community together
Yeah, you'd think the youtuber is smarter, but then you read the comments and see someone make a huge paragraph of calculations and scientific advice
This is insanely sick considering I’ve always heard that replicating peter parkers web shooters would be “impossible” awesome to see that turn more into a possibility with each of these cool designs!
Before every major invention and innovation is the herd of naysayers calling it impossible.
See also, The Wright Brothers.
the word impossible only means "we haven't found how to make it possible. yet"
it will prob take one century before we replicate an exact copy,it is complicated,dangerous,and much more,the major factor is the safety,cause ofc,shooting webs is already fun and safe,but if we want to swing we need to make it safe,cause if u just slam to a wall,well,goodbye
7:55 i guarantee it's possible for you to do. Amazing work as always
also i've realized ive been watching your vids for months and never subscribed, i had to fix that
"We've been waiting for you all summer and we're so glad you're finally here"
Oh, hi Dapz!
Oh look, it's god
The god himself has spawned
Imagine the honor of god himself commenting on your RUclips video
At this point take my credit card
Take mine too
Tho i dont have one
@@I.M_BRretard
*slams credit card on table.*
You don’t have a credit card💀😊
@@YoCosmicStarsyou don’t know that my man😊
Awesome job Joel! Suggestion: Use a mesh of nylon rope saturated with the glue. Instead of your anchor being a solid piece of metal it would be a complex knot covered in glue. When it sticks to a surface it hits and spreads out. The difficulty will be spreading the force out evenly over the glue rather than pulling on a single point at once. Some sort of slipknot like structure that dynamically adjusts to whatever surface/angle you hit could work.
This!
This!!! Do this!!!
Great points, I am thinking something flexible for sure!
@@JoelCreates you could try using a stronger adhesive too, that way you'd need less surface area for the anchor.
@@JoelCreates unfolding Wire mesh sabot with a hot glue slug inside the cartridge. Induction heating would only need to heat the tip where the slug is.
Its definitely worth taking another step. To swing like spider man would be a dream come true
To simplify: in engineering, if it can go wrong, it goes wrong. I wish more people would show that side of engineering. It's not all sunshine and rainbows, and that's why not as many people do it. You'll fail, probably a lot. It happens. Thanks for the amazing video.
It becomes frustrating for sure. 3000 attempts to make a light bulb.
@@solarsynapse yes but its worth it since seeing your creation ACTUALLY working will inspire you to make more creations! Maybe even some being actually helpful!
All of this started out of spite lol. Great work Joel!
Edit: I’ve seen other creators make geckotape and even that couldn’t hold near this much weight. Really impressive stuff.
You should look into the spring loaded arrow heads that open upon impact like the old reaper heads it could help with launching the plates later on. This is super cool btw.
I dont think that would work on bricks, bud. Even if the arrow could penetrate at the speed it would shoot, the plates on the sides of the head would need to be extremely powerful in order to force outwards through the stone. Although it would be an amazing idea.
I can't wait for the finished product
Its amazing to see something that I've always seen as impossible come to reality little by little, Great Work!
this how my grandparents felt when smart phones came out
Webshooters will be a thing bro, we will swing exactly like slider man
ruclips.net/video/JfbyiPaurlM/видео.html 🕷️💜
if u traveled back in time people there would be super surprised about things u have rn like your mobile phone it's just a small thing wich contains a lot of possibilities
anything is possible, just requires more really smart people to make it
Not me thinking it was a hotdog the first time I saw it
It's New York style
its nice to see that people like you and The. Amazing are still making real web shooters after pretty much a decade of progress
Dude! You must continue... This could be revolutionary.
I would imagine a more malleable mesh for the anchor at the end of the rope for fitting it into the tubing. Finding something that could be strong enough and malleable is gonna prove pretty difficult though. GL! Hope to see the progress.
Maybe something like a origami chain mail solution?
Also have you considered using like a neutral temperature adhesive and coating the mesh on the end of the rope in it?
If he uses that metal that returns to its shape with heat it would work perfectly
@@ethansquires2880 nitnol
ruclips.net/video/JfbyiPaurlM/видео.html 🕷️💜
Kevlar would almost certainly work now that I think of it
Hey man, quick question. Have you considered building the platforms similar to a bullet? With the glue head in the front, and a collapsible umbrella style metal mesh behind it? Can be launched with a compressed air charge, potentially part of the bullet, and should be able to glue, stick, and swing in 1 round as long as the glue dries quickly enough. Look into it? I don't have the resources to do it myself. Thanks and good luck.
I feel dumb
Good idea I hope he see this
Or maybe try making it yourself fam
@@kilovwdude6457 he got got the resources. Also sounds dangerous. What if the glue doesn’t dry fast enough. A hot glue on rounds sounds interesting though
Sounds like something worth looking into
This is really cool. I love how making Spider-Man webshooters a reality has brought so many different creators and ideas to the table, and it's amazing to see how close this web of creativity has come to turning fiction into reality.
nice pun
Make the web anchor collapse into the CO2 cartridge and then when its fired the outward pressure of the co2 would cause it to "Blossom" open like a flower, or a net, or a hollow point round.
If the anchor is metal and inside the co2 cartridge, then the glue could be pre placed/heated in the center. Not sure if that's the best description of the idea. But I'm sure by now, you've come up with an idea way better.
Andrew: i spent so much time developing my webshooters.
Tom: you still use your selfmades? I have some made by tony stark.
Tobey: you guys use webshooters?
Didnt tom create his own web shootersand fluid in civil war, tony just upgraded his gear or am i wrong?
@@LuciferMorningstar-uj9hz idk tbh 😅
It’s insane to me that this exists. I watched a video last night of a guy using suction cups to climb a building. You guys are 3 regular people, just fans with some serious intellect who’ve made a sci-fi action franchise closer to reality just on a whim & dream! Kudos to all your effort, your work though it may be criticized from the scientific community or the public at large will live on in the domain of public opinion & us nerds & geeks alike as a testament to how formidable the human spirit can be. This is extremely impressive & although you will have/had days where you thought of the fact that scenes in film depict trial & error in the form of a montage your whole video shows that same thing. It maybe 8+ minutes for us? But your dedicating so much time & effort into this & we thank you. Please keep going & remember for all human history you shall be remembered as a pioneer & what a common human can do to pushing the limits of human ability. This is generation 1, if you produced an offspring & taught them this & they carried on your legacy?? Imagine Gen 10!! From the mind of two guys making comic books dreaming up their wildest dreams, in a few centuries there could ACTUALLY be a Spider-Man. That. Is. An. ABSOLUTELY INSANE concept to envision. But it’s 100% in the realm of possibility. Imagine 300 years ago my ancestor living in a teepee envisioning me tapping into my iPhone a comment on a RUclips VIDEO sending this message of hope directly to you instantaneously at the click of an arrow. Then connecting with my family in a moment just as quick or ordering any type of food to my house, a car to pick me up, sounds transmitted to my airpods for hours on end & me working from my laptop that’s barely the thickness of a hide they used to cover with. That would be extremely alien & science & technology advances so much more exponentially every day. I cannot begin to express my profound respect for you & you work.
They just need radioactive spider to bite them, and 💥
Spider-Man
Bro just wrote an essay
@@vaze-11 and it was beautiful
Bruh i saw the exat same videos
Good essay But too much words
I absolutely love when makers make videos like this dissecting their designs into simple pieces to understand, great job Joel! Both on the video and the build!!!!
What if there was like a mesh of thin rope in with the hot glue, maybe attached to some ball bearings for weight, and they shot out and you could have it drag the rope behind. You could also team up with JT since he has experience with grappling hooks and having projectiles pull ropes
wow, super impressive. i thought this had been done to death online, but heating the cartridges through the belt, fully mechanizing the shooter, the quick change valves, all of it were really good. excited to see where your brain takes you from here, you're clearly looking at it from a different perspective than a lot of other youtubers
SPIDER-TECH
SPIDER-TECH
SO INTELLIGENT HE COULD BUILD A MECH
SPINS A WEB
ANY SIZE
CATCHING VIEWS
JUST LIKE FLIES
WATCH OUUUUUUUT
HERE COMES THE SPIDER-TECH!
For your anchor, an idea I'm sure you already thought of would be to make cuts kind of like slices of pizza so that it could essentially fold in on itself and be compactbut then when shot it would need to spring back in to shape as it's being hurled through the air. I thought that anchor system you had was just absolutely brilliant
Zackary Piper mentioned spring loaded arrow heads, and I thought of this exact same thing after! It's such a cool idea and concept
@@lisaborkowski6456 ha! Arrow head sounds waaaay cooler and more official than "pizza slices"
6:14 genuinely the best writing of any RUclips video. PLEASE CONTINUE THIS
Wow! This is really cool. It's even cooler that different RUclipsrs are working together. I'd love to see just how far this goes. Maybe some day, through your combined efforts, we will see a Spider-Man movie using practical webshooters that are 100% real based on ground work made by fans like you.
ruclips.net/video/JfbyiPaurlM/видео.html 🕷️💜
Awesome! Amazing how you built all of this first try without making even a single mistake and you were able to get this video out to us so soon after the last web shooter video! Joel is the undisputed master of this field
Have you tried experimenting with 2-part epoxies? For example, if it says 2 drops of hardener and you put in a bunch, epoxy can get *really* hot and set in seconds. Switch the cartridge for two compartments of carefully-selected sizes, and a mixing nozzle. The nozzle may quickly clog, but disposable one-off cartridges or easily replaceable nozzles could sort that.
this is the best web shooter on youtube
Hell yeah. Always been a fan of the traditional mechanic of how a webshooter functions, with fluid and a valve system, not those spring and wire crap that's getting popularity.
You guys got my full support in this.
This is super cool. The idea of using the glue with mesh grill to hold on to it is just perfect. If you want to integrate both of them in the same time, why dont you use the induction coil to heat up the mesh grill that is pre coated with the glue in a casing or something that releases its stickiness on impact!
May need to have a collapsible version of the mesh so that it takes up less space? Then when fired expands, maybe using centripetal force to spread out the mesh ?
@@Scott_C oh yeah. I thought of a simple umbrella like mechanic. Like there’s a peg at the front that when push, also pushes out the mesh outward. I have a design in mind but not sure how to share it.
@@Scott_C i don’t want the mesh to be wide open when fired caused it might not fly towards the target nicely as the mesh will have too much resistance.
@@idiotsandwich7528 i'd post it to Thingiverse.
@@Scott_C thanks
7:12 that's some strong tape
have you considered converting a 3d pen into a webshooter? apart from the usualstuff , you could even create objects like the 1960's animated show
I'm so happy people are still working on making real web shooters, its awesome !!!
6:41 Spiderman Homecumming....
bro💀
Ayo WTH 💀
Spider-Man cuming
naw 💀
💀
Wow. This is already 99% better than all the other “web shooters” out there
Man this guy is amazing! I’m really starting to think him and JD will make this happen
A real Spider-Man web shooter?! WOW
It's so awesome to see comic book and sci-fi gadgets coming to real life. Can't wait to see how far it goes
Awesome! For 40 years I've dreamt of doing whatever a spider can, like my all time favorite fictional hero. I'm probably too old now, but I sure hope you guys are able to live the dream.
Your never too old
Me waiting till to see him go “up up and away web…. Fly!!”
with the type off web cartriges you use you could ditch the spider man utility belt and do the scarlet spider :)
This is so amazing! I do have a suggestion on how you might be able to use one wrist for your glue cartridges and another wrist for your rope and anchor. In order to swing multiple times you would have to have a rotate-able wrist piece for multiple different anchors and ropes which would automatically rotate after the previous shot was fired and released. This would allow you to shoot the glue with one hand and the rope with the other and hold onto the rope while you swing to shoot the glue for the next rope to attach to. In order for you to be able to swing using both hands you would have to have the anchor and rope mounts on both wrists and glue mounts on both wrists which may prove problematic 😬☹️ I hope this helps out in any way!
But then wouldn’t have to hit the same exact spot twice if he’s shooting the glue and the anchor separately
I went into this video thinking ``A geez, another youtuber trying to make a web shooter´´, and oh man, I was wrong. The web shooter looks awsome, and its not junky or too heavy like other peoples attepts at making one, I´m honestly amazed, well done!
And also, the belt and the heating mecanics are brilliant!
i would suggest using small, but very sturdy hinges on the mesh plate. fold the plate inwards so when the cartridge propels the mesh and glue, it also opens up, thus sticking to the wall with the glue. just an idea
I cant believe that people are this close to actually make becoming spiderman a possibility. I just wish Stan Lee was still here to see these people.
1:08 "with great power comes great responsibility" XD
Swinging and hanging are two entirely different beasts, but look forward to seeing this evolve.
I give 💯 for his courage 7:20
I subscribed. Your channel is going to be huge in a few years millions of subscribers
This is so inspiring! Cool seeing this become a reality!
Make sure to "stick" with it!
you really just pulled a spiderman type of joke there
Rlly bruh
im literally building a real life webshooter on my channel just posted the first episode proving it works
haha, thanks for the likes.
:/
It has always been my dream to not only build web shooters like you, but to be able to use them in the real world. How far the engineering world has come is truly incredible, and I can't believe we have come this close to being able to swing like the iconic comic book character that spiderman will always be
You could make your anchor like a flower, with the “bud” at the front of the projectile and the petals hinged and tucked back like a slimmer shuttlecock, then you could load that in your hot glue chamber (with the glue already heated and coating the mesh) so when the projectile is fired and the bud contacts a surface, the petals would fling forward and expand outwards into your current shape. Your rope could be a slimmer wire, maybe a few platted lengths of deep sea fishing wire (rated for massive fish or possibly medium sized adults haha), set up on a spool on your belt and fed up a thin but rigid pipe to your wrist. That would be what I’d try next if I was in your shoes.
I’m not a maker, just thought I’d add a different perspective
good job, you are a genius!!
Love seeing spidey gadgets come to life. It's always amazing to see what passionate and persistent creators can make. Keep up the dream.
Hell yes! I thought this project was gonna stay on the sticky side exclusively for the next couple years but you've done it already! I'm proud of you bro!
Can't wait to see it fully developed!
I love this. Plz go to the next level
I'd love so much for this to become a big world event, the Web-Shooter challenge, a bunch of designing channels getting on the "let's make the spider-man web-shooter a thing and all collaborate in our own way" train to the point of having Sony/Marvel eventually officially getting involved!
One can only dream
Totally agree.... there's so much talent out here especially our kids.....so yes web shooter challenge .... let's have fun changing the work bringing fiction to real life
Domino Effect Meme: the smallest domino reads "YT user @Fk_F comments on a Michael Reeves video" and the largest domino reads "The realization of Spider-Man's technology IRL"
It's truly amazing the time we live in to be able to share ideas with those around the world to improve our projects
Joel, have you ever heard about a "Mechanical Lock Camera Remote Shutter Cable"? That might help make this project a little more.... flexible.
That is awesome! It would be so cool to see someone swinging around like Spider-Man!!
Super cool! That's so awesome you found another person working on the same sory of idea too! Can't wait to see where this goes.
Very exited to see where developments on this goes, you and JT are awesome :3
Hot glue “paintballs” inside of a foldable glue anchor kinda makes it so you could attach it to anywhere. You’d have to figure out how to launch the anchor and ropes, come up with a way you make the anchor deploy and strike a surface hard enough to spread the glue and get a good enough stick. Sounds like a tall order though
I love how you are getting extremely close to the real thing,I just wonder what people in the future could do.
Spiderman might exist in the future wow
Trully amazing seeing how superheroes inspire us into making improvements like this, keep it up!
Cool, Joel!
Please make a part two where you make the final web system shootable
You and JT are the future. I can just imagine replacing cars with web shooters to get around. Thank-you!
imagine if that actually were to happen, all the buildings would get so dirty lol
@@koray3774
Don’t worry. The webs dissolve in about an hour so it’ll be fine.
ruclips.net/video/JfbyiPaurlM/видео.html 🕷️💜
@@multiverse_media2023 but still, if there's like thousands of people swinging around then it will pile up more than dissolve
You could possibly use a spring loaded fold up version of the metal web bracket. Possibly folding into the canister right behind the glue! I’m sure you’ve already though of this trough haha
definitely worth taking another step, man. spiderman is my favorite superhero and it pleases me so much to see such talented people trying to get close to the tech that he uses on a regular basis.
maybe someday, the stepping stones you're creating is what might make the actual webbing tech come to reality.
everything you make is incredible
That was surprisingly good, so awesome, so much creativity and passion, keep on track man ❤️
ruclips.net/video/JfbyiPaurlM/видео.html 🕷️💜
"This character is so inspiring, and your hand is so talented. I will definitely make a video of the process of making a cement works on my channel.
"..
i would love to see how far you guys can go, please continue to amaze us! 🕷️🤟🕸️
2080: Everyone is spiderman because of Joel's idea. ;)
2099
This guys will make the dreams come true ❤️❤️❤️
Absolutely loved the thought you put in. Great job!
Keep pushing forward my man I'm supporting you, and your webshooting prototype! You've got my full support!
It’s an amazing feat to accomplish for sure. All the work you have done is already bringing you that much closer to making the real thing. It is so cool, thank you for bringing spider man that much closer to reality
like it's a childhood dream to swing like spiderman so beeing able to create something like that, i would be in paradise!! Good work and it's really insane man!!
Dude, this video held me more than any other! I am WITH YOU on the journey!!! Fantastic video!!!
Thank you :)
Damn, I wish you luck with this huge endeavor you stuck yourself into!
I'm looking forward to seeing where this will go!
This is cool I love it!
Excited to see where this project goes!
Yh 3rd time will be the whole suit lol 😂
love how much respect and appreciation you give to those who came before on the road to building your own :) fantastic stuff!
Can't wait to see where this goes, Spiderman was a large part of my childhood, so being able to swing like him would be a drama come true
I'm slowly going to believe that an actual web shooter might be possible. An that is awesome.
How did you learn to be such a good inventor??? This is *amazing!*