DIY Sawmill Parts List And Where To Get Them.
HTML-код
- Опубликовано: 25 авг 2024
- 18.75 Sheave - surpluscenter.com part# 1-BK190-E $44.95
4"x1.5" 450lb V-Groove Caster - Ebay $42.00
650lb Boat Winch - Ebay $17.95
4 Barrel Hinge - Ebay $7.98
8 V-Groove Bearing 3/8 - Ebay $19.99
1 Key Stock 3/16 - $4.25
4 Pillow Block 1-3/16 - Ebay $38.99
4 Stop Collar 1-3/16 - Ebay $11.75
Other Pulleys Are Subject To Your Motor!
/ rpridaho
Instagram: @redpoppyranch
Old video but invaluable, I tip my hat and say thank you from the place inside our hearts where honor and fairness come from, bless you and your's.
You seem to a jack of all trades! Good gift to have for building a Homestead and every not a lot of in come coming. And a blessed family too.
Your knowledge and ability to share it is extraordinary!! Thank you so much. Love the family.
Thank you for publishing this video, at the time i first watch it, i Was still puzzle about using tires or sheaves. You were the one to solve my problem, i have purchased the same sheeve and i am greatfull for your advise. It works good. Sgt rod
great job Red. im glad i caught your video. its the money that has kept me from getting a mill. and building one is my only option. so thumbs up to ya. and i hope to see your mill running.
Appreciate the video. Its crazy to look at the inflated prices of the items you have listed in 2023
I worked in an old apartment building that had two of both those pulleies in every hallway for the old dum waiters! Sold everyone to guys building sawmills! I got $50 each for the big ones.$10 for smaller ones back in 2014
Hep buddy thanks form the info, you've done your home work, and given a great deal of though to the build. Good luck stay safe in these uncertain times.
Dang Man I just now found your videos. You have done a great job putting them together. I have been thinking about building one myself. You got me thinking......
Gawd I can't believe its been 6 years since I started watching Red Poppy Ranch, clear before there was the ranch here it is Jan 29 2024 now !!! and he has hardly used this mill he built !!!
Top Man
The way to Homesteading not like these "WANGLE*****" types who ask for new kit to be sent to them for free.
Keep up the good work Seeds from this channel are now sown your will reap the harvest in the coming years
Thanks Richard!
I'm all excited for the big reveal & seeing you mill some lumber 😎
I can hardly wait for part 3!
You're rocking it ! Flying right through that looking forward to seeing it done and working.
bought same pulley from surplus center but get the pulley for 1.5 shaft my shaft broke with the smaller shaft after some use all these items cam be bought at surplus center .com blade guides from cook saw are great but pricey
Can't wait to see the mill in action! Will last a lifetime!
From where I buy it ?
I would recommend some diagonal welded bracing and a double vertical arm instead of a single. 4 pipes, not two for the vertical support. 3 bearing blade guides not one in order to encapsulate and control the blade and keep it from slipping off. 13 hp or above, 10 inch large pully or larger on the drive wheel.
Thought about this today after looking at mills. Pretty sure I will diy with a small diesel using a pto/clutch setup that allows for blade engagement progressively, as well as a clutch to a power feed. I actually am considering using a hydrostat mower transaxle to run both blade and carriage. I think if I take my time getting good deals/scavenging, under $1000 is doable. Also a tiller might be a really good PTO source! The ability to have a hydraulic output alone is cool. I mean honestly they can be had cheap enough, (nearly free) it would be worth it just for hydraulics to turn or lift, and drive to feed. I'm betting the hydros are good enough to at least lift and lower a saw or turn a log. Even cooler if I can utilize the low RPM PTO to lift a log. Anyone thought of adding a vertical cutter to their carriage? Something else it might be able to do. Use circular saw blades with adjustable position on an output shaft, say 3 of them, that could cut 1x or 2x on a first pass, with the band saw taking the second. Could even use the depth of the band cuts to be the set depth of the circular saws. I think 7-10 hp would have no problem with a few 10" blades long as the feed speed is reasonable. Still faster than turn slice turn
A second note I look forward to seeing this come to life at 1/3 cost of new
Thank you for the video you are like a wizard,Take Care and can't wait for the finished job.
I had a question about the shiv the one that you list the part shows a v-groove shouldn't it be a flat groove for a Saw band?
Fantastic info on what's needed and providing sites where to get everything. I see the large pulleys are almost double the price now though. :(
Thanks for the parts list. Thats what i call cool. Im in Mendocino. Going to build one dudes.
Loads of information thank you very much
I looked on eBay cant find pulleys for 17.00 what is the other cheaper web site thanks Koz
Since you posted the source and price for those 18.75 inch sheaves, the store increase the price 300% . Capitalism at its best :)
Joe Biden at his best
Seen this post was 4yrs ago wonder what they are now
Just what I was looking for!. Thanks !!
Looking forward to seeing this thing work.
I just received my wheels today and shaft and bearings. Going 1 3/16” as well.
Hey there where did you get the wheels from I’m missing something? I can’t find the link
Parts list but no link to find parts
Great video
I have most parts for a mill just needed a few items now. The big shives
Where the clutch pulley without clutch you be cranking engine with blades engaged making it harder to crank ?
Muy bien amigo, me gustaria saber que motor poner para una maquina bastante grande que estoy haciendo. Saludos de argentina.
I would be interested in the safety features when you get that far. Both personal and mechanical ... blade stops ... etc.
Absolutely!
any idea when part 3 will be put on your channel..this is the best diy videos on RUclips on a sawmill build..thanks william
I'm really trying to do it right. Hopefully later this week. Thanks for watching!
Great presentation
Nice ,can't wait to see it working with all together
Thanks for the video and the laundry list.
If the blade 1 inch boar (vertical) what is the right shaft size and from where you got the shaft?
Love the detailed list of parts! I would love to build one of these!!
How can get a full list of all the components that make a sawmill???
I'm thinking about building myself one also.
Good Morning from South Carolina. I am building a mill based on using the sheaves. How do you determine what the blade width should be or what blade width are you using? Thanks.
Great info, thanks.
I really enjoy your channel, cheers
Thanks for the support!
Wish you the best of luck but concerned about those large pulleys. They look like belt pulleys. If so I don't think they will work as they are. Is there something missing?
I really like the boat winch idea. I am building one of these too. What is the vertical travel of the blade for every click of the boat winch? Can you move 16ths of an inch? Is it consistent?
Thanks for making the videos!
Not sure yet. I will figure out what the turns represent on the winch. It's not as precise as acme rods but way cheaper...
Thats a ratchet winch you want a worm gear winch
On any cable winch, as the cable accumulates on the shaft the size is going to increase, thus changing the amount of travel on each turn.
What do you run in the inside of your pulley for the blade to rude on ?
Did you use hot rolled bar stock for the shafts or cold rolled?
love your videos. With a "B" belt what is the width of the blade you are using?
I'm curious as to how balanced the sheaves are? I know they are typically statically balanced.
I ask because I intend to build my own upright bandsaw. I can order wheels from a few different equipment manufacturers, but I'm looking at $300-400 for the wheels alone.
I honestly don't mind the cost, if I'm assured of running the machine at 3000+ SFPM with little vibration, but if I can get wheels for $100, obviously I'm in favor ...
Theball Player i've ran them at over 4000 SFPM without any issue which is way too fast by the way. The blades are designed to run that fast. I haven't had any balance issues.
What size belt did you use to fit snub on the pulley's?
Good job. Will the 18.75 wheels on eBay work well . I have found some at a place called warehouse surplus. Your help much appreciated. Thank
What kind of store does one buy stuff like this? I want to get into the "maker" scene but finding stuff like this in first place is very hard. Home Depot, Canadian Tire etc does not really carry stuff like that.
Would you have the part number for the belts that you used on the sheaves as well?? And thanks for the info too!!
Great Job!! I don't see a link where to buy the wheels can anyone help? thanks
did you ever build the sawmill? kind of interested to see it finished.
Very helpful thanks
Get a 14''to16'' drive pulley, you will find out why when you try to use the one you have.
can you explain why ? i'm planning on building a resaw
Sir I want to buy a sawmill but.when I will get it
Hey, how long a shaft did you use per side of you would be so kind? Just trying to get a rough idea how much I should order. Great job documenting the project. It is funny, our red poppies just came up when I come across your channel. We only have a couple though that grow around the gas well. Wish we had the profusion that grows in you AO, would love to harvest them for the herbal properties. Think parts are edible also.
I ordered three feet and used around 1.25' per side
Thank you kindly. Was hoping I might get away with a yard section, but seemed like it might be a tad short.
Where did you buy the larger pillows?
Where did you buy the large pulley set?
Where did you get your shafts for the sheaves
Local steel yard. 1-3/16 steel rod. I cut grooves in it.
Thank you
Thanks a lot.
Why didn't you buy locking bearings instead of locking blocks?
Eh where did you get all those materials?
Awesome
How many rpms will your motor tolerate? And have you factored in the torque on your shaft? Do you have something to regulate those rpm's?
Not officially sure. I have an Idea what it's going to take. The pulleys I have are likely too small but I'm going to try it. There will be a little figuring once I get it all together.
Hey there. If the engine came off a generator as you mentioned, 99.9% of today's generators like you get at the local home centers run 3600 RPM, goverened speed no matter what the HP, watts / KW. Hope this helps and again, sweet build you have going on there. As for the tapered shaft on the gen motor, I just had a snowblower motor given to me here in North central FL...Go figure. We don't get much snow in FL. Anyhow, the shaft is in 3 steps with the smallest diameter being 7/8" (.875"). It's going to be a bit of a challenge getting things lined up on it when I decide to build.
change the crank shaft in the motor
Hey there where is the parts link to purchase the parts
With an 11 hp engine your blade should roll out around 3800 sfpm . With that being said I can look right at your set up and tell you that your blade speed is going to be about three as fast as you want/need it to be. My guess is that you needed three of the 18.75 pulleys not two. Don't take my word for it, do the calculations for your self on this site. vintagemachinery.org/math/sfpm.aspx
Also SFPM in relationship to HP are a general guideline in the sawmill world and can vary with max RPM of said engine. Most standard engines run at 3600 to 3800 RPM max. This is what I've found from other sawyers/builders.
10 HP = 3600 SFPM
11 HP = 3800 SFPM
12 HP = 4000 SFPM
14 HP = 4200 SFPM
16 HP =4400 SFPM
18 HP and up 4500 SFPM and the blade should never exceed this nor should it need to, if the gear ratios are correct it will cut with authority.
nice job
Donde puedo encontrar esas partes
Am in Gulu how do I get these parts
You said you were leaving a link to get parts I don’t see one?
Thanks for the info : Saves EVERYONE hours and & $ in research. what was your final optimal ratio for RPM blade speed
in relation to engine RPM ?
New videos coming soon on the mill
I heard somewhere, can't remember, a blade speed , how ever you get there, of 50 mph.
They clocked it with police radar.
Can you tell me where you found the larger wheels for that price please and where you found the rest of your parts
I put it in the link. I found mine on Ebay. I'm not sure if there are anymore that cheap but surpluscenter.com had the next best price.
Royunderhill
What’s the website for the pulleys
I looked up the sheave you listed at Surplus Center #1-BK190-E. The description said "Fractional HP". Does that mean it's rated to transmit only a fraction of one Horse Power?
Anybody? What does "fractional HP" mean? The price on those wheels is very attractive BUT I want to get a pair that won't break under load, or worse.
OK Mister
Good video! What size belts do you run on those bandwheel/sheaves?
I think about 57".
Ok Thanks
Not seeing the link to any website?
How you order that weels
Como compro las partes.
Please update. Inflation has savaged this list.
What about the blade?
How many cost off bend saw
What was the green things called
Pillow block bearings.
How do you make the 18.75 sheave run the blade on?
You put a v belt over the sheave.
how long a belt?
Send me the link for the sheaves please
Where can we put our order in for a custom made mill? lol
Wheres the link for parts?
How fo you plan to have a band blade run in a V grove ? fill the grove with liquid rubber to support the band ? or machine one side off the V and make a flat surface ?
Just confused on the planing with the 18 in pully
I will but a v-belt on each pulley. This helps with traction and keeps it from metal on metal.
That sounds fine to fill the V area , there is a shoulder to hold the band on also , on pulleys on band saws , besides the guide wheels on the supports , worth your time to look at some expanded saw pulley pics . Great to see you do this build at such a lower cost .
Best regards John
Will do John!
@@RedPoppyRanch did you end up using a belt to fill it in. If so what one? Nearly done with my build just need to figure out that part
Gostaria que foce em português
I want this
Wow great job, would you make me one ? 😄
where did you get the sheaves for 17 dollars
ebay
I've had a hard time finding any that size or close to that size for less than 200 dollars
Red Poppy Ranch I’ve been looking at different places for the sheaves and they aren’t cheap. Almost every place wants at least $200 a piece for them. I’ll keep looking around
Do you have a drawing of your mill and all parts discripion that you would like to sell
Also interested in plans.
I am Indian please tell me sir
All parts list apload