For everyone not getting this to work: If you still can only bind one rx/tx, make sure that you radios are set to the same region/frequency. You have to unlock that setting for some Modules (on the Micro TX you have to press the button 10+ times).
I believe this feature was developed after a chat comment was made by a regular TBS user requesting this feature during a TBS lounge several months ago. TBS stated they had never thought about this feature before the comment was read during the lounge. Nice job whoever made the comment.
I love how you explain everything consistently and logically. I struggled for a week to do this, watched a bunch of videos with all sorts of useless assholes jumping over the most difficult moments. Respect and respect to you👍
THIS JUST SAVED MY life. well idk yet, i still have to try this. just recently, any time i disconnected my battery, my crossfire just didnt transmit at all. one day i would have no issues, fly like 5-6 packs and it was beautiful. the NEXT day, no dice. none of my quads connect to my radio.
Hats off to you Joshua, that the best explanation I've see yet. I've attempted setting up my WiFi a couple of time and gave up each time. It's now time to attempt again by following your instructions. Thank You.
Way more complicated than it needs to be, but I got it set up without encountering any issues and now it works like a charm! So great to be able to seamlessly switch from Taranis to Tango 2 without having to rebind.
Spent 2.5 hours doing this for a friend last Sunday so I have a pretty good idea what kind of outtakes you must have in your archives. I know I pretty much exhausted my vocabulary of colorful metaphors. 🤣
now someone needs to complete the two controller mountain challenge. Multibind 2 radios, on person flies up one side of the mountain and shuts off their radio, other person turns on and flies down the other side. As far as i know the challenge issued by trappy still stands. someone do it and become a legend 😂
we´re actually doing something similar with my friend. He´s gonna launch a plane manually from his cottage and then let it fly autonomously and then i´ll manually land it at my place, using multi bind. How come no one has every done this
@@lhotakfpv4113 that’s awesome , so technically if a plane has enough battery you can pass it off to multiple pilots for better range and video call it “passing the torch “ . Sounds fun tho , maybe I can fly my plane to a friends house and he can fly it back to my house
you can see the status of the wifi module by lua. the agent x does not/super slow update while its connected. if the wifi login by agent x fails, use the web ui(my preferred Methode)
Great job Joshua! I have been watching the TBS Live and Lounge videos and was so excited to hear about Multibind. Some of the receivers are buried, like the one in the Raging Droner which is up under the flip fin. I have been holding off updating until I actually understand the directions and can understand what I am doing. I thank you for explaining it all and helping me to finally get it done. This is one of the reasons I support you on Patreon. Thank you for all of your hard work.
Glad you made this video JB. I have the full size Crossfire unit and when I bought my Radiomaster TX16S I got the V2 crossfire with that radio now looks like with a bit more frustration I can use two different radios and two different models awesome. Thanks again for all the videos
Doing step by step i lost all binds. Looks that wifi should be don on v1 first, then on v2. Sad that now i need rebind all drones again. But finaly i made it. Now works all. Thank you very much. Now i understand how dificult was for you to make this video.
PRO TIP: I had the same issue with the WiFi not connecting through AgentX selecting network and typing in password. Here’s the trick. Within the web browser, using the same address as you used to update the firmware you can click on the other tab at the top and it will take you to a screen where you can type in your Wifi information and it worked for me first try. Hope I explained that well. Basically don’t type your wifi password into AgentX, instead type it into the right slots in the web browser using the mac address you used earlier.
I have 6 drones with a crossfire V2 and now I just bought a tango 2 pro v3 to use in multibind with the 6 drones, do I have to update the wifi on the crossfire v2 and the tango 2? Now everything is linked to the crossfire by the normal method, are the 6 drones linked at once because they are already in the crossfire v2? I have not found any video on youtube that clarifies it.
Thanks for demonstrating this. The TBS stuff is great, but a bit confusing to get your head around. I think this is a very handy feature for anyone upgrading to the V3 TBS Tango board.
Joshua Bardwell some old videos were you guys really got into it and listening to both you guys talk about each other over the years. if that's not the case I'm glad you guys are friends now 👍
Wifi firmware 1.17 is not needed. You can also use 1.15 like the TBS manual says. My micro tx v2 sits on 1.15 and i was not able to update it to 1.17 or 1.41 but it still works fine.
THANKS so much Joshua! I was getting so frustrated with this. Just got the Tango II PRO and I wanna bind everything I had on my TX lite, so so frustrating! !
Coolness.....It was VERY hard to find this Module several months back but glad to hear it was worth the time and money(I knew it would be Tho). Thanks for the heads up dude. As a TBS Crossfire noob this will help tremendously. My next 5 inch build will be my first multirotor using Crossfire TX RX.
I believe I'm on the right track to getting this working with TBS Agent Web (agent m). If I understand this correctly, as long as I can see a user ID (under "About") and the ability to enable or disable Multi-Bind (under "Radio Settings"), then this should work. I'm waiting to get my XF Nano TX in the mail, so hopefully, I can test this out soon and be able to use either my XF Micro TX or XF Nano TX with all my XF receivers without re-binding.
Thank you for the great video. To say TBS's WiFi module is wonky is an understatement. I've been wanting to multibind for a while so I can fly both my Tango2 and MicroTXV2 on my main quad. Your video finally inspired me to give it a shot. I was able to get everything upgraded and installed, but the Tango2 always states- Server: Offline 8. Sometimes it changes to different offline numbers. Oddly enough I was able to get my MicroTXV2 connected long enough last night to pull a user ID, but even it is only getting offline server status as well. Do you think it is an issue with my setup or is the issue with TBS servers?
Just want to give an update that this has been resolved and both of my XF TX's are now showing "Online" and multibind is working. Trappy actually replied to my Facebook post, so I'm assuming they must have done something to their cloud servers to resolve it. :-)
Hi JB, I had the same issues with connecting my TX to home WiFi, would not connect finally fix it if you go through the "192.168.4.1" WiFi page it connects with no problem.
JB should post an update to this video...Quattro FPV is absolutely correct. Wifi works when you connect through the web browser. You will be chasing your tail with the Agent X method.
Hi Joshua thank you for making this video. QQ for you if you don't mine. I fly DJI Digital FPV systems and recently ordered my first crossfire quad. Which controller do you recommend I purchase for my crossfire quad?
Just been trying to do this and struggling to connect to WiFI In the end did it quite quickly using TBS Agent lite on the transmitter Radiomaster tx16s
Have not been able to update either my Micro TX nor any receivers for I don’t know how long now. I’ve spent countless hours “bricking” my receivers only having to go through the extremely tedious Emergency Recovery each time, whilst staying on F/W that is now many many versions old. Tried all I can, re-downloaded, re-installed, re-bound, recycled, re-smashed-my-head-with-a-hammer. All to no avail. But meh, they all still fly, just not on the latest firmware. And I think I’ll keep it that way.
Hi Joshua, is it me or something went wrong with multibind ? Everything was working perfectly following your tutorial on my Tango 2 and my X9D+ with the XF module but about one week, since I’ve updated my TBS Agent, the X9D is losing its ID all the time. I can get it back by plugging it on my computer. But 5 minutes later it’s gone again 🤔. Did you encounter this kind of problem recently ?
hi joshua i had a question i'm pretty new to the hobby are tbs crossfire and tbs crossfire nano rx the same? what crossfire remote should i get? bc one of the drones i'm getting is tbs crossfire and the other one is tbs crossfire nano rx
@joshua bardwell i try to do that since a week. Don't find the dammed wifi from my tx lite. I update to 4.11, download the files extract them and drag them to my desktop. But no damn wifi to be found. What am I missing? Please help! It's about multibind. I Got an Id thoa. Is that enough to set both to my id? Same sh.. on my micro tx Thanks Joshua
Hi, Me and my friend plan to fly a route from his cottage to my place with a plane. he´s gonna launch it manually and then press waypoint switch, then let it fly and then i´ll turn on my radio 19 km later and land it. Do you think this is possible using the multibind function?
Well I need a new laptop as my 👽 ware M17x was stolen. So before I get into fpv I will definitely buy a laptop first lol but these videos are really good for help. Thanks bro 👊
Hi Josh 😃, this might be a silly question but, is it possible to fly one drone using 2 TX? What I’m trying to say is that, one Tx will be flown by a primary pilot and the other one is for a the trainee. Thanks 😊🙏
1.08 is what is on the one that came with my tx126s, and I was able to get it on my home (unify) wifi by disabling all but 1 AP, and only having 2.4ghz enabled. Just like I had to do with some of the hinky "smart home" devices I run. After that, I was able to turn all my APs back on, and back to the configs I normally run.. Connects every time now.
How did you setup your wifi network to use blurry characters for the password? :) I also had the same wifi issues that you did, but as soon as it finally connected it has been rock solid ever since.
Heads up but it is WAAAAY easier to get the Crossfire module to connect to your Wifi through it's web interface instead of Agent X. Just connect to the AP, open a browser to 192.168.4.1, click the Wifi tab, scan (doesn't seem to work unless you scan first), click the wifi network, enter the password, and then connect. I spent half an hour trying to connect my Tango 2 and TX16s using Agent X with no luck. Wifi interface worked first time on both.
I've been having this really weird issue in the TBS client, it will sometimes show my channel output map and then sometimes that whole section will just disappear from the client altogether. it's not just that part either there's a bunch of other parts that will just randomly disappear and reappear. I have uninstalled and reinstalled the latest versions and still have this issue intermittently. I'm assuming it has something to do with the signal between the transmitter and receiver being wonky but I have no way to verify. Has anyone else seen this? my gear works fine but sometimes it's a pain in the ass to update stuff.
so no mention what happens when both Tx modules are active ? can we assign one as master and the other as slave so that both can control a single quad and use it for example as a trainer mode ?
QUESTION: When Mulitbinding different models to a single TX, the stick endpoints are set for the first model and carryover to the next model. Is this an inherant issue? THX! Might be a new topic to explore! 8)
Thanks for the video Joshua. I was just looking at the crossfire firmware release notes and for firmware 4.0.0 there is a warning about the update requires FreedomTX V1.21 or newer. What is the implication of this, are you still running OpenTX? cheers.
@@JoshuaBardwell Do you run crossfire Shot? If so, I thought you needed to run TBS's version of OpenTX, which I believe is currently based on OpenTX 2.3.5.
I already configure multibind for my micro v1 and tango 2. Huge problem is to connect to WiFi network from Agent X. I try several times without any success. It say cannecting and do nothing. Finally I connect to TX wifi module and configure WiFi connection in browser.
One question! while you don't have that much power for video transmitter even on DJI , What is the point that you upgrade your radio transmitter with TBS to over 10 kilometer ?
QUESTION: I have no user id in the tango 2 or the micro tx menu Things I have Checked: Signed in to tbs agent x Green light in all devices Wifi connected Firmware upto date (newer) Any thoughts?!
Make sure your new TXv2 isn't region locked. You will never get this to work if it is. There's a document on TBS to show how to disable the region lock. I went around in circles for a few aggravating hours before figuring this out.
Have you already made a video about the vtx-channel automatically following the fusion modul via tbs cloud? I think I followed all the steps but I can't get it to work.
TBS Agent X is a piece of shit you unfortunately cant avoid. Launch, pray its in mood, do whatever you need to do and run. Not updating, hanging in weird ways, not binding receivers or updating them, behaving erraticaly in all forms and factors. Kudos to you for managing to push through it to find the exact feature I was looking for. It will take me probably a week before I find out how exactly did you manage to do it :)
Well Like i said. Its a shit you cant avoid. I managed to get through wifi, upgrading firmwares etc. I stayed on 3.72 as i know upgrading firmware on TX will almost certainly disconnect all rx. Managed to get wifi working, logged in the cloud. First old module, then new module. Now ALL MY QUADS ARE UNBOUND!!!! Time to disasemble each one and rebind....
Actually I found out that disabling multibind on the original micro tx V1 after the whole operation (when it is unbound) re-enables binding with the models (green instead of red), and if you do it with wifi enabled, turning it back on keeps the binding and seems to transfer to V2....
Good info. I’ve been considering crossfire for a while. Doing my research. Just haven’t got around to it. I’m dealing with a FrSky X7 at the moment. Contemplating doing the baud rate mod or just get a Tango 2 or something like that. I just got the R9M setup so...yeah. I don’t know right now.
Still stuck connecting the transmitter to my internet. Does "Connecting" and never connects. Not sure if it'll ever work out just randomly work like with Joshua. Trying to multibind a Tango2 and a Full-sized 2W crossfire module.
Also what if I am binding them on another control completely with another tx module, like I have used the jumper t16pro2 with a micro crsf I am now using the jumper t lite with a nano tx
This thing is driving me mad , my tx module wifi on agent x is on for a few seconds then goes off for a few seconds so can't look at the wifi settings in agent x because it will not stay on 😡, is this the same process for linking the Fusion to wifi cloud ?, also when on the cloud web page and search for clients it always finds nothing even after an hour , I have watched videos and there networks show up in a few seconds but nothing and I am surrounded with many networks and this is driving me mad 😡.
I just lost ALL my bindings following this. I tried disabling multibind but it didnt work. Do I now have to rebind all my models? There is something wrong or missing with this guide.
@@albert8329 true, but you may not have lost them. if you turn it of it still might be bound, then when you turn it on it will download the number into the receiver and multibind will work. i had to do that on mine. regardless it’s kind of wonky but cool once you get it working... good luck
When you update firmware, you have to update the firmware on the receiver too. Turn on the module. Put it in bind mode. Plug in the receiver. It will auto-bind and the module will ask, "update firmware"? Then just hit yes and wait for it to finish.
Learned something today :) . The tbs agent is lagged and reads the wifi module through usb. The radio already tries to connect to the home/local wifi to get the userid after the first prompt "are you sure you want to connect to the wifi" from the tbs agent. So dont do anything and hold tight even if the Tbs agent prompts you to connect to the wifi second time (the second time actually cancels the wifi connection). As you do this open up the wifi module in the radio and check progress in the tx/tango 2 module display. Wait for a bit and use mobile hotspot preferably so u c wenever the module connects to ur phone wifi. i watched this video multiple times but could not get it working. So wanted to share my feedback incase anyone else faces the same issue. And lastly thank u very much for all the fpv learning videos u post :) @Joshua Bardwell
I've tried everything but I cannot get the Multi-bind option to show up, the transmitter is connected to my network as I can access it's new internal IP (eg 192.168.1.142) from my hardwired PC, the radio says that it is online. I have an x-lite with the nano tx, I have also tried on a x7 with the micro tx v2. Both firmware are the most recent 'XF Micro TX' is running 4.10 and 'XF wifi' is running 1.17. Any suggestions would be much appreciated. Thanks
I had issues just binding my Micro TX V2 to the receivers. (Never had crossfire before) I finally bind them but don’t know exactly what work. How I made it. 😅😅😅 I don’t know
I feel like having all my RX ID's and email stored online is unnecessary. Would be far simpler if TBS agent had you plug both modules in and then do a straight copy between. What is TBS doing with the data? It feels like another registration ID but with RX serials. 🤔
I completely agree that it should be possible to link these guys simply by plugging in to TBS Agent. I have no idea why it's required to connect the device to WiFi.
@@JoshuaBardwell are we sure that the ID of the RX are stored on the cloud servers? is it the case that once the TX have user ID's used as part of the bind process (looks like a one time connection to the cloud servers for each tx), the RX just looks for the matching ID of the other TX? I'll try and set up a and test tonight. thanks so much for the walk through.
Hey JB (and or anyone) I just got a v2 after years of rocking my v1 without an issue. The v2 came with 4.02 beta firmware installed and the most recent is 4.10. Has anyone tested 4.10 as stable? Should I just stick to 4.02 for now? Thanks
@Joshua Bardwell, Can you use this system to do "handoff" from one controller to another while the quad is still in flight? I'm thinking of things like flying over to the other side of a mountain, where a second pilot takes over on the other side :)
This doesn’t really apply to me as I run all my quads on CRSF and off of a Spektrum radio. Which has SD slot and card reader and makes copying and transferring models super easy but I love all analog & non DJI content. Lol 😂 old school nerd here 🤚
I have a Taranis/Lite and Tango 2, half my quads bound to one, half to the other, and they all work perfectly. I'd love to have Multibind working, but.. I'm in the "if it aint broke dont fix it" zone and all this updating looks like a dicey pita.. I'll pass until the bugs are out of it. Not a big deal really, the Tango already meets/exceeds the enjoyable range of my dji/vistas anyway.
What happens if you power up transmitter A with quad A and then you power up transmitter B and quad B? Assuming both transmitters are bound to each quad with multi-bind? Is it going to cause problems? I am just asking because I want to bind all my quads to both of my transmitters and sometimes I want to fly together with my son.
Hi, is it possible to use multi-bind to have a second TBS transmitter as a trainer unit? I have all my quads on Crossfire, I have TBS Tango 2 and I'm looking for options to teach my son by buying just one more transmitter from TBS and another pair of goggles.
JB - sorry for a slightly dumb question - but can i ask does this actually update the firmware and receiver firmware via the TX ? so basically wireless updates for all firmware moving forward or something else? thanks
![☀ Мультибинд и TBS Облако. Две аппы на один приёмник? [TBS Cloud | Multibind]](http://i.ytimg.com/vi/d-GdyERiyO8/mqdefault.jpg)
![☀ Мультибинд и TBS Облако. Две аппы на один приёмник? [TBS Cloud | Multibind]](/img/tr.png)
![☀ Крошечная антенна на 900MHz - обманули физику? [TBS Minimortal T]](http://i.ytimg.com/vi/ISNthKMqSH8/mqdefault.jpg)
For everyone not getting this to work: If you still can only bind one rx/tx, make sure that you radios are set to the same region/frequency. You have to unlock that setting for some Modules (on the Micro TX you have to press the button 10+ times).
Thank you for posting this, I was about to freak out and return the new Tango II because I couldn't get Multibind to work.
any recs on videos of this or which button youre referring to?
got it. ruclips.net/video/y07Gmly86b8/видео.html
I believe this feature was developed after a chat comment was made by a regular TBS user requesting this feature during a TBS lounge several months ago. TBS stated they had never thought about this feature before the comment was read during the lounge. Nice job whoever made the comment.
I love how you explain everything consistently and logically. I struggled for a week to do this, watched a bunch of videos with all sorts of useless assholes jumping over the most difficult moments. Respect and respect to you👍
I love it when you have issues and problems, I mean I don't feel so alone when I see you struggle. We are all in the struggle together
THIS JUST SAVED MY life. well idk yet, i still have to try this. just recently, any time i disconnected my battery, my crossfire just didnt transmit at all. one day i would have no issues, fly like 5-6 packs and it was beautiful. the NEXT day, no dice. none of my quads connect to my radio.
That's pretty amazing, actual binding without pressing bind button, who would have thought that could ever actually happen.
Hats off to you Joshua, that the best explanation I've see yet. I've attempted setting up my WiFi a couple of time and gave up each time. It's now time to attempt again by following your instructions. Thank You.
Way more complicated than it needs to be, but I got it set up without encountering any issues and now it works like a charm!
So great to be able to seamlessly switch from Taranis to Tango 2 without having to rebind.
Spent 2.5 hours doing this for a friend last Sunday so I have a pretty good idea what kind of outtakes you must have in your archives. I know I pretty much exhausted my vocabulary of colorful metaphors. 🤣
now someone needs to complete the two controller mountain challenge. Multibind 2 radios, on person flies up one side of the mountain and shuts off their radio, other person turns on and flies down the other side. As far as i know the challenge issued by trappy still stands. someone do it and become a legend 😂
we´re actually doing something similar with my friend. He´s gonna launch a plane manually from his cottage and then let it fly autonomously and then i´ll manually land it at my place, using multi bind. How come no one has every done this
Already all set to do..we will soon release the vdo
@@lhotakfpv4113 that’s awesome , so technically if a plane has enough battery you can pass it off to multiple pilots for better range and video call it “passing the torch “ . Sounds fun tho , maybe I can fly my plane to a friends house and he can fly it back to my house
@@megahertz6787 I tried it with crossfire and it works, though it took me a while to figure it out :D
@@lhotakfpv4113 so you passed a plane to a friend or a quad ?
Using the TBS nano module, love it! Eventually won from the Ghost, but mostly because Ghost is impossible to get.
you can see the status of the wifi module by lua. the agent x does not/super slow update while its connected.
if the wifi login by agent x fails, use the web ui(my preferred Methode)
Great job Joshua! I have been watching the TBS Live and Lounge videos and was so excited to hear about Multibind. Some of the receivers are buried, like the one in the Raging Droner which is up under the flip fin. I have been holding off updating until I actually understand the directions and can understand what I am doing. I thank you for explaining it all and helping me to finally get it done. This is one of the reasons I support you on Patreon. Thank you for all of your hard work.
Glad you made this video JB. I have the full size Crossfire unit and when I bought my Radiomaster TX16S I got the V2 crossfire with that radio now looks like with a bit more frustration I can use two different radios and two different models awesome. Thanks again for all the videos
Doing step by step i lost all binds. Looks that wifi should be don on v1 first, then on v2. Sad that now i need rebind all drones again. But finaly i made it. Now works all. Thank you very much. Now i understand how dificult was for you to make this video.
PRO TIP:
I had the same issue with the WiFi not connecting through AgentX selecting network and typing in password.
Here’s the trick. Within the web browser, using the same address as you used to update the firmware you can click on the other tab at the top and it will take you to a screen where you can type in your Wifi information and it worked for me first try.
Hope I explained that well. Basically don’t type your wifi password into AgentX, instead type it into the right slots in the web browser using the mac address you used earlier.
Just as I ordered the TBS Crossfire Nano TX to use with my Taranis X9Lite S and my Tango2 v2, Bardwell releases a "How-to multibind" video... Legend
I have 6 drones with a crossfire V2 and now I just bought a tango 2 pro v3 to use in multibind with the 6 drones, do I have to update the wifi on the crossfire v2 and the tango 2? Now everything is linked to the crossfire by the normal method, are the 6 drones linked at once because they are already in the crossfire v2? I have not found any video on youtube that clarifies it.
Thank you so much I'm a new crossfire user and this was driving me crazy.
Useful only for a few of us. Binding with crsf is the most simple thing ever.
Completely agree. Easy as hell
9:24 Stopped me dead in my tracks. lol
"Put your hands up, now back away slowly"
Thanks for demonstrating this. The TBS stuff is great, but a bit confusing to get your head around. I think this is a very handy feature for anyone upgrading to the V3 TBS Tango board.
"perfect .... amazing" that made my day x'D
I wish you and Trappy were more amicable. Your tutorials really create synergy with the products. 👍 What’s shaking JB? Noice content brother
What makes you think we're not amicable.
Joshua Bardwell some old videos were you guys really got into it and listening to both you guys talk about each other over the years. if that's not the case I'm glad you guys are friends now 👍
Wifi firmware 1.17 is not needed.
You can also use 1.15 like the TBS manual says. My micro tx v2 sits on 1.15 and i was not able to update it to 1.17 or 1.41 but it still works fine.
THANKS so much Joshua! I was getting so frustrated with this. Just got the Tango II PRO and I wanna bind everything I had on my TX lite, so so frustrating! !
!!!!FIXED!!!! Could never get the Wi-Fi to work with TBS Agent. Do it over the web ui. Worked instantly.
yes perfect timing! thats what i've been waiting for, was just about to do it myself since i now own a tango 2 and jumper t16.
Coolness.....It was VERY hard to find this Module several months back but glad to hear it was worth the time and money(I knew it would be Tho). Thanks for the heads up dude. As a TBS Crossfire noob this will help tremendously. My next 5 inch build will be my first multirotor using Crossfire TX RX.
I believe I'm on the right track to getting this working with TBS Agent Web (agent m). If I understand this correctly, as long as I can see a user ID (under "About") and the ability to enable or disable Multi-Bind (under "Radio Settings"), then this should work. I'm waiting to get my XF Nano TX in the mail, so hopefully, I can test this out soon and be able to use either my XF Micro TX or XF Nano TX with all my XF receivers without re-binding.
Thank you for the great video. To say TBS's WiFi module is wonky is an understatement. I've been wanting to multibind for a while so I can fly both my Tango2 and MicroTXV2 on my main quad. Your video finally inspired me to give it a shot. I was able to get everything upgraded and installed, but the Tango2 always states- Server: Offline 8. Sometimes it changes to different offline numbers. Oddly enough I was able to get my MicroTXV2 connected long enough last night to pull a user ID, but even it is only getting offline server status as well. Do you think it is an issue with my setup or is the issue with TBS servers?
Just want to give an update that this has been resolved and both of my XF TX's are now showing "Online" and multibind is working. Trappy actually replied to my Facebook post, so I'm assuming they must have done something to their cloud servers to resolve it. :-)
TBS is the best just coz the things they do. thx for a great vid as normal and for the stressess and time u save us.
Hi JB, I had the same issues with connecting my TX to home WiFi, would not connect finally fix it if you go through the "192.168.4.1" WiFi page it connects with no problem.
Good thinking man, saved me a lot of headache, thanks.
Really...man you are a lifesaver. This really is a shitty process using the TBS Agent X.
JB should post an update to this video...Quattro FPV is absolutely correct. Wifi works when you connect through the web browser. You will be chasing your tail with the Agent X method.
Mine won’t connect through the web page or agent x
Great video, as always. Gotta make the switch to crossfire! Also I see you got great taste in networking gear.
Pretty interesting! Thanks a lot, Joshua! 😊
Stay safe there with your family! 🖖😊
TBS woohoo! Thanks for always continue to innovate! This is a cool feature!
thanks for the video! we want to see the video about all the other functionality of tbs cloud
Hi Joshua thank you for making this video. QQ for you if you don't mine. I fly DJI Digital FPV systems and recently ordered my first crossfire quad. Which controller do you recommend I purchase for my crossfire quad?
Tango 2 is an obvious choice if you want the game controller form factor. RadioMaster TX16S is my current daily.
Please do video about all the TBS stuff with the WiFi. The fution with the vtx, with the crsf
Just been trying to do this and struggling to connect to WiFI
In the end did it quite quickly using TBS Agent lite on the transmitter
Radiomaster tx16s
Joshua very good video, thanks, it made life easier
Omg makes me feel better I've tried 5 times to film this same type of video.
Have not been able to update either my Micro TX nor any receivers for I don’t know how long now. I’ve spent countless hours “bricking” my receivers only having to go through the extremely tedious Emergency Recovery each time, whilst staying on F/W that is now many many versions old. Tried all I can, re-downloaded, re-installed, re-bound, recycled, re-smashed-my-head-with-a-hammer. All to no avail. But meh, they all still fly, just not on the latest firmware. And I think I’ll keep it that way.
Hi Joshua, is it me or something went wrong with multibind ? Everything was working perfectly following your tutorial on my Tango 2 and my X9D+ with the XF module but about one week, since I’ve updated my TBS Agent, the X9D is losing its ID all the time. I can get it back by plugging it on my computer. But 5 minutes later it’s gone again 🤔. Did you encounter this kind of problem recently ?
hi joshua
i had a question
i'm pretty new to the hobby
are tbs crossfire and tbs crossfire nano rx the same?
what crossfire remote should i get?
bc one of the drones i'm getting is tbs crossfire
and the other one is tbs crossfire nano rx
Is that the radiomaster TX16S MAX edition in the thumbnail? Hopefully the release an upgrade kit for early adopters.
I want that folding handle!! And the cnc buttons and other stuff
@joshua bardwell i try to do that since a week. Don't find the dammed wifi from my tx lite. I update to 4.11, download the files extract them and drag them to my desktop. But no damn wifi to be found. What am I missing? Please help!
It's about multibind. I Got an Id thoa.
Is that enough to set both to my id?
Same sh.. on my micro tx
Thanks Joshua
Hi, Me and my friend plan to fly a route from his cottage to my place with a plane. he´s gonna launch it manually and then press waypoint switch, then let it fly and then i´ll turn on my radio 19 km later and land it.
Do you think this is possible using the multibind function?
I do think it is possible.
Well I need a new laptop as my 👽 ware M17x was stolen. So before I get into fpv I will definitely buy a laptop first lol but these videos are really good for help. Thanks bro 👊
Did you switch to that updated tx16s with that cnc folding handle? It’s in the thumbnail
I yes I saw the user id now changed on both modules to be the same.
Hi Josh 😃, this might be a silly question but, is it possible to fly one drone using 2 TX? What I’m trying to say is that, one Tx will be flown by a primary pilot and the other one is for a the trainee. Thanks 😊🙏
ruclips.net/video/D9Z40WPyjoQ/видео.html&ab_channel=JoshuaBardwell
1.08 is what is on the one that came with my tx126s, and I was able to get it on my home (unify) wifi by disabling all but 1 AP, and only having 2.4ghz enabled. Just like I had to do with some of the hinky "smart home" devices I run. After that, I was able to turn all my APs back on, and back to the configs I normally run.. Connects every time now.
How did you setup your wifi network to use blurry characters for the password? :)
I also had the same wifi issues that you did, but as soon as it finally connected it has been rock solid ever since.
Heads up but it is WAAAAY easier to get the Crossfire module to connect to your Wifi through it's web interface instead of Agent X. Just connect to the AP, open a browser to 192.168.4.1, click the Wifi tab, scan (doesn't seem to work unless you scan first), click the wifi network, enter the password, and then connect. I spent half an hour trying to connect my Tango 2 and TX16s using Agent X with no luck. Wifi interface worked first time on both.
I've been having this really weird issue in the TBS client, it will sometimes show my channel output map and then sometimes that whole section will just disappear from the client altogether. it's not just that part either there's a bunch of other parts that will just randomly disappear and reappear. I have uninstalled and reinstalled the latest versions and still have this issue intermittently. I'm assuming it has something to do with the signal between the transmitter and receiver being wonky but I have no way to verify. Has anyone else seen this? my gear works fine but sometimes it's a pain in the ass to update stuff.
@-- figured as much, thanks! I'm just happy the hardware works pretty damn good once you get over that hassle!
@-- lol 😂 but it works better than any other control link I’ve ever used. So go figure
so no mention what happens when both Tx modules are active ? can we assign one as master and the other as slave so that both can control a single quad and use it for example as a trainer mode ?
The first one to turn on is active. The 2nd one waits patiently until the 1st one disappears.
QUESTION: When Mulitbinding different models to a single TX, the stick endpoints are set for the first model and carryover to the next model. Is this an inherant issue? THX! Might be a new topic to explore! 8)
So far on both my micro tx and my nano tx it has just sat on connecting
Thanks for the video Joshua.
I was just looking at the crossfire firmware release notes and for firmware 4.0.0 there is a warning about the update requires FreedomTX V1.21 or newer. What is the implication of this, are you still running OpenTX?
cheers.
I dunno about that but I'm still running OpenTX 2.3.9.
@@JoshuaBardwell Do you run crossfire Shot? If so, I thought you needed to run TBS's version of OpenTX, which I believe is currently based on OpenTX 2.3.5.
Will you ever do a video on the nano tx?
I already configure multibind for my micro v1 and tango 2. Huge problem is to connect to WiFi network from Agent X. I try several times without any success. It say cannecting and do nothing. Finally I connect to TX wifi module and configure WiFi connection in browser.
One question! while you don't have that much power for video transmitter even on DJI , What is the point that you upgrade your radio transmitter with TBS to over 10 kilometer ?
Because you want to be sure that you won't failsafe control link. Then you only have to worry about one thing instead of two.
I have full module but i dnt see the wifi module,i must go with the same way that u use for v1? Thx
QUESTION:
I have no user id in the tango 2 or the micro tx menu
Things I have Checked:
Signed in to tbs agent x
Green light in all devices
Wifi connected
Firmware upto date (newer)
Any thoughts?!
Make sure your new TXv2 isn't region locked. You will never get this to work if it is. There's a document on TBS to show how to disable the region lock. I went around in circles for a few aggravating hours before figuring this out.
Have you already made a video about the vtx-channel automatically following the fusion modul via tbs cloud? I think I followed all the steps but I can't get it to work.
TBS Agent X is a piece of shit you unfortunately cant avoid. Launch, pray its in mood, do whatever you need to do and run.
Not updating, hanging in weird ways, not binding receivers or updating them, behaving erraticaly in all forms and factors.
Kudos to you for managing to push through it to find the exact feature I was looking for. It will take me probably a week before I find out how exactly did you manage to do it :)
Well Like i said. Its a shit you cant avoid. I managed to get through wifi, upgrading firmwares etc. I stayed on 3.72 as i know upgrading firmware on TX will almost certainly disconnect all rx. Managed to get wifi working, logged in the cloud. First old module, then new module. Now ALL MY QUADS ARE UNBOUND!!!! Time to disasemble each one and rebind....
Actually I found out that disabling multibind on the original micro tx V1 after the whole operation (when it is unbound) re-enables binding with the models (green instead of red), and if you do it with wifi enabled, turning it back on keeps the binding and seems to transfer to V2....
Why are both tx'en connected now? Cuz they have loggod on through the same agent X account to the internet?
Good info. I’ve been considering crossfire for a while. Doing my research. Just haven’t got around to it. I’m dealing with a FrSky X7 at the moment. Contemplating doing the baud rate mod or just get a Tango 2 or something like that. I just got the R9M setup so...yeah. I don’t know right now.
I love my r9, I've had no issues with it.
I thought the release notes said you need some special version of OpenTX to use version 4.0. No?
I wonder about this. Isn't it true to bind every quad again, when the TX is updated?
Still stuck connecting the transmitter to my internet. Does "Connecting" and never connects. Not sure if it'll ever work out just randomly work like with Joshua. Trying to multibind a Tango2 and a Full-sized 2W crossfire module.
Also what if I am binding them on another control completely with another tx module, like I have used the jumper t16pro2 with a micro crsf I am now using the jumper t lite with a nano tx
This thing is driving me mad , my tx module wifi on agent x is on for a few seconds then goes off for a few seconds so can't look at the wifi settings in agent x because it will not stay on 😡, is this the same process for linking the Fusion to wifi cloud ?, also when on the cloud web page and search for clients it always finds nothing even after an hour , I have watched videos and there networks show up in a few seconds but nothing and I am surrounded with many networks and this is driving me mad 😡.
7:00 Exactly how i feel going from frsky r9m to micro tx v2 on a qx7. I gave up and bought a tango:(
I just lost ALL my bindings following this. I tried disabling multibind but it didnt work. Do I now have to rebind all my models? There is something wrong or missing with this guide.
bind with multibind off then turn multibind on while the quad is plugged in, it will download your number to the receiver
I already lost all my bindings. I think that if I have to rebind everything I can just do it with multibind enabled and it would work.
@@albert8329 true, but you may not have lost them. if you turn it of it still might be bound, then when you turn it on it will download the number into the receiver and multibind will work. i had to do that on mine. regardless it’s kind of wonky but cool once you get it working... good luck
When you update firmware, you have to update the firmware on the receiver too.
Turn on the module. Put it in bind mode. Plug in the receiver. It will auto-bind and the module will ask, "update firmware"? Then just hit yes and wait for it to finish.
Learned something today :) . The tbs agent is lagged and reads the wifi module through usb. The radio already tries to connect to the home/local wifi to get the userid after the first prompt "are you sure you want to connect to the wifi" from the tbs agent. So dont do anything and hold tight even if the Tbs agent prompts you to connect to the wifi second time (the second time actually cancels the wifi connection). As you do this open up the wifi module in the radio and check progress in the tx/tango 2 module display. Wait for a bit and use mobile hotspot preferably so u c wenever the module connects to ur phone wifi. i watched this video multiple times but could not get it working. So wanted to share my feedback incase anyone else faces the same issue. And lastly thank u very much for all the fpv learning videos u post :) @Joshua Bardwell
I love the thumb nail
I've tried everything but I cannot get the Multi-bind option to show up, the transmitter is connected to my network as I can access it's new internal IP (eg 192.168.1.142) from my hardwired PC, the radio says that it is online. I have an x-lite with the nano tx, I have also tried on a x7 with the micro tx v2. Both firmware are the most recent 'XF Micro TX' is running 4.10 and 'XF wifi' is running 1.17. Any suggestions would be much appreciated. Thanks
I had issues just binding my Micro TX V2 to the receivers. (Never had crossfire before)
I finally bind them but don’t know exactly what work. How I made it. 😅😅😅 I don’t know
I feel like having all my RX ID's and email stored online is unnecessary. Would be far simpler if TBS agent had you plug both modules in and then do a straight copy between. What is TBS doing with the data? It feels like another registration ID but with RX serials. 🤔
I completely agree that it should be possible to link these guys simply by plugging in to TBS Agent. I have no idea why it's required to connect the device to WiFi.
@@JoshuaBardwell are we sure that the ID of the RX are stored on the cloud servers? is it the case that once the TX have user ID's used as part of the bind process (looks like a one time connection to the cloud servers for each tx), the RX just looks for the matching ID of the other TX? I'll try and set up a and test tonight. thanks so much for the walk through.
Perfect timing. It is as if you were reading my problems on discord LOL
Hi Joshua, which Open TX version you use in your TX16s, please? I see you have enabled CRSF shot. Thanks in advance!
This is the IRC Ghost custom build.
@@JoshuaBardwell Thanks Sir!
Hey JB (and or anyone) I just got a v2 after years of rocking my v1 without an issue. The v2 came with 4.02 beta firmware installed and the most recent is 4.10. Has anyone tested 4.10 as stable? Should I just stick to 4.02 for now? Thanks
0:22 i was like dooo it throw it dooooit....
When I connect to the crossfire wifi m module on my computer it connects but it disables the internet and I can't go to no further steps
My module won’t connect to the WiFi network, even after the 1.17 update to the WiFi network. Any thoughts please?
@Joshua Bardwell, Can you use this system to do "handoff" from one controller to another while the quad is still in flight? I'm thinking of things like flying over to the other side of a mountain, where a second pilot takes over on the other side :)
I think in theory this would work however the timing of the handover would need to be tested.
This doesn’t really apply to me as I run all my quads on CRSF and off of a Spektrum radio. Which has SD slot and card reader and makes copying and transferring models super easy but I love all analog & non DJI content. Lol 😂 old school nerd here 🤚
Great stuff men thank u
Can this work when using hotspot?
I have a Taranis/Lite and Tango 2, half my quads bound to one, half to the other, and they all work perfectly.
I'd love to have Multibind working, but..
I'm in the "if it aint broke dont fix it" zone and all this updating looks like a dicey pita.. I'll pass until the bugs are out of it.
Not a big deal really, the Tango already meets/exceeds the enjoyable range of my dji/vistas anyway.
Could you use this to multi bind a module in a tx16s and a Tango 2?
Epic thumbnail xD
What happens if you power up transmitter A with quad A and then you power up transmitter B and quad B? Assuming both transmitters are bound to each quad with multi-bind? Is it going to cause problems? I am just asking because I want to bind all my quads to both of my transmitters and sometimes I want to fly together with my son.
Only one transmitter will work with each quad. If two transmitters and two quads are powered up, I'm not sure what will happen. Don't do that.
Can you please test the mamba mini f405 mk2 stack ?
Will this work with full size crossfire?
Hi, is it possible to use multi-bind to have a second TBS transmitter as a trainer unit? I have all my quads on Crossfire, I have TBS Tango 2 and I'm looking for options to teach my son by buying just one more transmitter from TBS and another pair of goggles.
I don't think multi bind has that capability. You would need radios with a trainer port.
@@JoshuaBardwell so minimum investment would be 2 taranis +1 tbs module at least. :-) thanks for your quick answer.
JB - sorry for a slightly dumb question - but can i ask does this actually update the firmware and receiver firmware via the TX ? so basically wireless updates for all firmware moving forward or something else? thanks
Not wifi. It updates the receiver from the module using the wireless control link. The same wireless link that normally controls the aircraft.
@@JoshuaBardwell right. Understood. So you still have to have to use the wired update to upgrade the firmware for the Crossfire Nano module ?
Yes you plug it in to your computer using USB and update it using TBS Agent X software.