Sorry for your loss mate. This is always my go to recommendation for new players and there must be 5 of them on our team here. 3600NT (100 quid) is cheaper than all the pistols I've bought here... Did you replace the whole trigger set with the RA Tech kit? I put it in my original FCG after I wore down the original sears and it always seemed a bit sticky on the reset, so I put a teammates donated original FCG on mine. Valve striker wore down on my original and now on my replacement so I'll be doing a video of transplanting the RATech enhanched striker from my old FCG to the newer one soon. Also had the brittle mag issues with two of my four mags breaking the screw retainer tabs that hold in the gas cartridges at the base. And shedding the connector studs. I've just taped mine together solidly in pairs now to make it easier, although I only tend to carry one pair in the gun for fast changeovers because the mags are a ballache for pouches (HSGI tacos work well for single ones). I broke the front end of the gas nozzle twice doing full auto in tropical heat, and then sheared the back end of the nozzle and seal o-ring off once, but now I have about 3 different nozzle set ups to mix and match parts from, and a spare bolt. Broke the charging handle off twice rough handling it, might get the RATech one of those too. And the bolt stop and related magazine tabs have worn a bit on mine but all still work great thus far. Besides all of the wear I've imparted on it (mainly because I love it and have used it as my go to for so long due to reliability, recoil and accuracy using 0.3g BLS BBs) it's still an awesome workhorse and dirt cheap, easy to service and repair. I've probably put the best part of 15-20,000 rounds through mine here, although it's hard to keep count.
@@checkmate058 It really depends on how you look at how you define better. The GHK m4 has some big advantages that the G36 by WE doesn't have. The GHK m4 can use the Devilhunter mod. This is modifying a greengas mag so it can accept co2 which the G36 can not, it will blow up the magazine. Parts availability is also very good for the GHK m4. However, the WE G36 does score really well for it's value. It's not darn expensive. They go between 200-250 euros while a GHK m4 will go for about 600 euros and higher.
@@checkmate058 also if you want a cheaper way into GHKs then you could always go for a G5 as the mags are compatible. The ghk g5 The WE G36 And the WE Mp5 Are all good starter gbbrs in my book.
@@James-C24 kinda had my heart set on a m4 platform coming from real firearms and loving realism. But this review threw a little wrench into that when he raved about that other design.
@@checkmate058 ive got a ghk m4 and its a great gun. Not fired it yet out on the field but i gassed the mags up left them for about 7 to 9 months got it out a few days ago. Mags still full of gas and it ran like a train. No bbs as i was indoors but its a great reliable platform. If budgets an issue start with a g5 and build up a collection of mags or carry on saving and go for the m4. Either way with a GHK you wont ever be disappointed. You also won't need to do any upgrades to them really certainly not out the box. Just dont by a WE if it takes an M4 style mag just dont their shite. Ive had more issues than id care to mention with my we 416. Unless of course you want a PDW then the we pdws arent bad but i think they have proprietary mags. Although ive heard of QC issues on the new ghks so that's something to bear in mind.
I'm really sorry for your loss. Having lost a few friends over the years it's always weird what stuff about them sticks with you and what things bring nice memories of them. Grate review! I've still not got myself a WE g36, I really should as they are cheap and it would make for a grate indoors or loaner gbbr for letting friends use as who wants to use an AEG (in the words of a pal of mine who came airsofting with me the other weekend 'I'm not using the silly hand blender sound gun it's not fun). I think the only thing putting me off is how much I just don't like the design of the G36 having a strong leaning towards more classic looking (really old) blasters... That said I could make one look like something from dominion tank police...
Thanks Jess. Even little things we remember about them, jokes and stories they told. All those moments will eventually be lost in time like tears in the rain. - Roy Batty. I know what you mean. Its a very modern looking blaster. I was never much into them but over time they've really grown on me. I think you'll really love how it runs, its a pleasure to shoot. Oh yes, AEG's...how dull!
My condolences for your loss dude. It’s never easy to lose people close to us. But unfortunately such is the circle of life. Best thing we can do is keep our heads up high and cherish our memories with them. It’s cool that this hobby helps you remember the good times you’ve had with Pete. It’d sure do the same for me if I lose any airsoft friends. Bout the rifle: the G36 platform has always been a gorgeous rifle to me, and the original CoD 4 back in 2007 made me fall in love with this gun. I’ve always wanted a g36c since, and I had a crappy “dual power” one lol but it’s high time I get a better one. This will absolutely be the one I choose. I’m already picturing how I’d want to doctor one up: an aimpoint comp sight, flashlight on the side rail, a working PEQ red laser in front of the optic, maybe a vertical grip underneath, one of those Laylax external bolt release levers if I can find em, and perhaps a tracer unit suppressor. That’d make this an incredible tactical indoor blaster for me. Not being able to drop my mags for speed loads would bum me out a bit but I can sure get over that. Thanks for the videos as always man, can’t wait to see more as always, cheers! ☕️
Thanks brother. Oh yes. That game was amazing!! The follow-up games were too complicated and there was far too much choice. COD4 was basic and that made it interesting. Sounds like a good idea. Well, you shouldn’t be dropping GBB mags anyway ;-) too bloody expensive to risk it. Glad you enjoyed the video. You’re very welcome, it has been a long-time coming.
@@BadaBingPictures no problem man 👍🏻 And yeah! That game is what got me into more realistic modern military FPS games. CoD has fallen flat on its face a lot recently but I love the new modern warfare. I love the variety of gun customization and the gunplay itself. Having modes that are more simplistic like Cod4 would be very cool though. And haha yeah I know 😅 I used to drop my m9 mags all the time and eventually only one of them started leaking. I’m lucky nothing else happened to them lol. Practicing tac reloads without dropping them is key however. Having good pouches will allow for a faster reindex of the mag to the pouch. But now when I get into rifles I’m for sure gonna have to keep in mind the added weight falling to the ground if I drop them. And hell yeah dude! I always enjoy the videos. Love the way you do em! 👍🏻
Sorry for your loss man. We can see Pete was warm, happy and good man. That is amazing tribute to your friend. Love your channel. I bought MWS because of you. Cheers man.
He was a great guy. A true legend, and we miss him dearly. Thank you for your kind words. Really appreciate it, mate. Glad you got yourself a TM M4. Awesome to hear.
Condolences for your loss mate, Pete sounded like a absolute legend. On a lighter note, this video rekindled my love for the G39. Definitely going to blow the dust off mine and show it the respect it deserves. Thanks for the reminder!
In the times of loud RUclipsrs with rubbish diction and poor vocabulary you are so easy to listen, pure pleasure. You got yourself a follower :) and you convinced me to look for this replica to buy :)
Welcome to my little corner of RUclips, Mr Jaworoski. Good to see you. Thanks for watching, and I'm thrilled you're enjoying my content. Yes this G36 is a lovely replica and fun to use as well. I think you'll like it.
Thanks buddy, thrilled you're enjoying the material. I'm slowly working my way through my to-do list. Takes me ages to make just one of these, but I think it's worth it.
Happy days, another Mr. Bing video - cheers mate, like the new indexing/timestamp system, makes winning arguments a whole lot easier. Cheers. Had a bit of an upgrade to my mws recently, got a hao bolt and will be experimenting with a g&p buffer, I'll keep you posted, in the mean time if you weren't already aware have a look at the haoptw kits for mws! On a positive note old soldiers never die, they just hit that great big beautiful NAAFI in the sky, I've got my place reserved - me and JC are gonna knock back a few cold ones.
Ahh Mr Mills, delighted you could join us. Yeah I thought I’d start organising the review into specific sections for quicker navigation. Hope it plays out okay? Sounds cool. How come you bought a new Bolt? I had heard of various new bits available to the Marui M4 system but these days I’ve moved on from that platform. Cheers bud. Hah! Neck back a few for me.
@@BadaBingPictures The new bolt is first of all for lightness for winter like your uac number, secondly for a faster rate of fire and lastly for the looks - gorgeous geissele dark desert earth with the logo. It also completes my urgi build, less charging handle.
Another great video, I don't know why but I do have a soft spot for the G36 with different hand guards (I have the grenade launcher one) and the upper rail can be changed for the scope in rail one, on a different note if you ever want to do a video on the KC02 (best DMR Gbbr) you could always borrow mine (I'm always passing by your way), for that matter I'd even lend you my new GHK AK74M
sorry for your lost badabing! *raises coffee mug* here's to pete! its interesting how you worked your way back to this rifle. or maybe it worked its way back to you? clearly you have great memories from back in the day running it with pete!
I think it's worked its way back to me to be honest. Thanks man. Yeah, I have fond memories of running and gunning our G36's. He also had the G36E and that was cool.
Her Majesty would kindly disagree. Not even chewing gum is allowed on site, let alone camera equipment and toy guns! Patience my friend. Halfway into another review and that should be arriving this month. 👍
If I were to buy one of these the biggest question would be which variant to go for. I suppose given the extremely competitive pricing (along with getting the most from your mag's) the argument could easily be both. A great review and definitely food for thought. Condolences for your loss, it's never easy losing people you care about.
They used to make K and E upgrade packs so you could upgrade your C if you had one already. KY Airsoft can provide the spare parts so you could build whatever you wanted. I never touched the K variant but Pete owned the E version as well. It was lovely having that full sized G36. Added a little bit more weight and that naturally soaked up the recoil so it wasn’t as hard as the C. Still, it was badass. Depends on where you see yourself playing. Thanks for watching, mate. Cheers for your kind words also.
@@BadaBingPictures appreciate the heads up, I'll have a look and see what I can find out. I'm leaning towards the C as I do a fair amount of CQC stuff but I don't think I've ever seen the Helstodt (spelling probably wrong) dual optic on a C. Admittedly that's not an issue but I'd part with my TM G36K and keep the sight as they're hard to find.
@@FreeFragUK The C works out fantastic in close quarters so it’s got a great loud bark and snappy too. Trouble is the stock over here for any gas G36 is a bit limited.
I'm sorry for the loss of friend which Pete . May He Rest in Eternal Peace (in Heaven). I'm sure He's happy looking from above and seeing this video is made to Honor Him .
If these were in stock anywhere in Canada I might have picked one up instead of an MWS MK18 for 950CAD. I also noticed in the tear down there was a rubber buffer to absorb some of the shock of the bolt hitting the receiver. Why this isn't standard on most GGBR's like the GHK G5 is beyond me. My Kwa VZ.61 has something similar and the thing its rock solid, whilst I read that MP7 and MP9 polymer bodies crack all the time.
Also had one for quite a long time, it's still alive and kicking, but sadly something weird has happened to auto-fire, it's tripping a lot there, while single fire works like a clock, haven't really got there yet. I also have quite an early model, so yeah, taping the barrel nut to have a better outer barrel fix is required and the hop-up unit was actually really crappy, I was needed to shim the hop-up arm (notch was actually too small for the stock nub, so it was applying too much pressure on the rubber), then with a new rubber it wasn't enough, so I've exchanged the nub with H-nub and it's working great and became perfectly aligned (some other nubs I've tried were inclined to tilt in a single direction, so hop-up was also uneven and that hurts accuracy big time). Absolutely agree on that the gun is probably the best entry ticket to the world of GBBRs - pretty affordable, while maintaining a descent level of quality.
I have one of these and love it. Modified mine to a G36K A3, shooting 400 fps with .20g bbs. Only issue I have with mine is it eats the nozzle o-ring might be a issue with the ra tech nozzle but the stock nozzle shoots too hot for the fields I play at.
Does anyone know what happened out of the blue where these things just dissapeared from like all archives and everywhere in the US? They’re practically never heard of besides outside of the states. I owned one a decade ago and ended up selling it because I could never find replacement parts, regretting that now that they seem to be a sought after item
Grab one if you can. All WE GBBRs with the open bolt system use the same internals, you can take the WE KAC PDW or 416 or M4 or G36 Internals and swap them out, since the firing group has the same parts for all these gbbrs, all have the same internals. Josef Mucha did a video about this if you are interested in finding out more about it.
I own the C variant already had to buy a new factory nozzle I only put 200 rounds through it with green gas and just today in the cold a part of the nozzle broke off where it locks into the hop up chamber I'm not sure what caused it if anyone can help also does anyone know the difference between the grey nozzle and the black one some we g39s have a black one I own two they both have grey nozzles 🤔
@@BadaBingPictures you got me thinking of getting one. Lol. I’ve had several WE before. Usually hold up ok. If you understand that knockers and trigger parts do break. I like the deal for under 200. And hk stickers are available online. Lol.
i had those G36K and C, installed a we PDW inner barrel by Laylax/prometheus . Shoots 450fps for The C type, and 520FPS for the G36K with modified prometheus AEG inner barrel 363mm rock solid never failed to shoot, that barrel wobble can be remedied if u use Ares B&T style Handguard with a little filling . my only complain is just the magazine case. just like your video explain. overall a very reliable GBBR. hammer destroyed after 4 years. if u want to upgrade the trigger set i suggest only to change the hammer with the ratech one leave other stock
Hey Badabing! Always awesome to watch one of your videos. And you've made this one just for me, I've asked for it a few weeks ago and there it is ;-) I have a question, I think I've seen in one of these game footages one with a carry handle with the integrated optics although I can't find it again by scolling through. Anyway, do you know if it can take one of those AEG carry handles with integrated optics? You see for me it doesn't have to be such a precise replica, a WE G36c with one of those carry handles would be a good enough Stargate gun. So sorry for your loss man! Unfortunately our airsoft goup has also lost a comrade a couple of years ago, it's horrible, he was also too young to pass away.
Thrilled to hear you enjoyed my video. Thanks bro. Yes, I’m my gameplay footage I was actually using the old classic scoped G36 carry handle. (Although just out of shot) Can’t remember the brand but it was for an AEG and it bolted on perfectly. Sorry to hear that. Awful, just awful. Always a reminder to take as many photos and videos as you can.
You can do that, sure. Although I found these mags too chunky on their own, let alone clamped together...and removing them out of a pouch can be trickier as its a bit of a UNIT.
Sorry for your lost Im pleased you're having all that props such as a flecktarn jackrt abd so. I could only running VFC ones lol And it seems Im the only picked the lemmon among my friends
Thanks buddy. Oh yes. I love Flecktarn. It was my first camouflage that I bought for Airsofting many many years ago. I just had to have some German decoration for the table. I've just got some Lebkuchen as well, so the next H&K GBB will have that ;-) I haven't had the pleasure of the VFC G36. It looks great.
@@BadaBingPictures Well, the pleasure of VFC is using RS parts and assemble to KA4 configuration, which is the wildest dreams you can get for a G36 . The problem VFC is the same old problem ,you hardly get support parts once production ceased, just like dirivng a Lancia sometimes I dont know it is kind of sorrow seeing such ppl leaving us, either ito the eternal life or other reasons they have. However, I would always be glad know ppl playing airsoft and caring others like that
Just received some bad news about an old friend this morning. Fuck Cancer. What are the odds that this is the first video that I click on this evening? Must mean something right? I'm sorry for your loss, It's more than obvious that Pete truly meant something to you. I'm sure he still crosses your mind. The intro was a beautiful tribute. I think we all could have been friends with Pete.
Sorry to hear that mate. Not just our friends and family, but our 4-legged family too. Just heart wrenching. Thanks. I still come across old photos that I thought I had lost. So it’s nice that he’s still fresh in our minds. Yep. He was one of those guys that could break the ice in any situation. Total legend.
Got my h&k 416a5 gbbr today after waiting 2 and a half months and man was it worth it zero barrel wobble and locks back 100% very pleased with it on your video you did the crono and was getting 480 isn’t 480 on full auto illegal?
Congrats. Happy new gun day! Another solid unit feedback, thanks for letting me know. Issues are rare nowadays. Regarding the FPS, I can’t remember that far back but if it gave me 480 then yeah probably. 🤷♂️
That is not bad for that one part is the only to break. Which means parts are easy since it is a known issue but since other companies make steel versions for that part that means this is a really great gun.
Hi guys, I've this gun and I've already broke 3 nozzles after having a cooldown and releasing all the gas. Everything else looks fine inside the gun, the hammer is still there too, so could it be the gas or a broken mag causing the issue? I'm using a silicon based green gas which gave me 0 problems on my pistol.
Great review. There is an Army Armament version which is a cheaper version of the WE version and requires the "upgrade" parts quicker due to breaking. Would be worth seeing a video of that for comparison.
Hi bud, Thanks for watching. Glad you liked it! I've seen the Army version and I'd like to look at a comparison but I just don't have the budget nor the time to dedicate to it. I hear their magazines are considerably heavier than the WE. So I would rather buy the WE magazines and save on weight, even though they're likely to be more expensive.
Anyone who has ever shot a G36, either a fake one or a real one will tell you, if you have to touch the charging (NO) maintenance handle outside of maintenance, youre using it wrong. The g36 is meant to cut costs. It cheap to produce because of the polymer, the real magazines are less than 5 quid each, its easy to take apart and maintain, and on top of it all, using it get so much easier once you discover the secrets of the bolt release. If youre a right hand shooter, lay your left hand around the magwell, such that the gun rests on your left thumb with the bolt release and give it a fiststrike on top of the buttstock with your right hand and the bolt carrier will jump forward. Similarly you can also angle it 45 degrees to your left (positive mathematical sense, negative clockwise) and you can also use your right hand and fiststrike the right side of the gun to release the bolt. If youre a boring man, you can also just release with your left hand by tilting your left hand away from you.
Yeah I suppose you’re right. It’ll even things out. The gas seals on the magazines are 1mm thin wide o rings. I think any high pressure gas will just blow them out if it’s in comfortable temperatures.
The gun is now for well known for its copy, the Army Armament R36. Out of all GBBRs from WE Army Armament copied the G36c, that's says everything about the design.
Golden Eagle make WA AR15 platform GBBR's. Cost same money like WE g36 and you start with Full Steel TCG, this is another platform with promising upgrades potential without pot metal TCG.
@@BadaBingPictures after watching this kinda makes me want on...I've got a bead on a used one with 5 mags for about 300bucks. And it has the HK trades on it too
@@BadaBingPictures oh yes the g3 is doing fine...I stuck a 300mm crazy jet with a 70 degree autobot in it...she is a tack driver!! People on the field hate me for it...I can hit shots with it up to 200ft..but then all my gas guns do that...on another note...I've recently started a facebook page...ghostwalker airsoft tech..take a look...nothing fancy yet. I've been off fb for about 5 years now so a lot has changed and I'm still feeling my way around..take a look if you are so inclined.
@@BadaBingPictures Thats fine i totally understand. You make me really want to pick up an MWS. Keep up the good work dude! Really enjoyed your content. Wish that i had discovered your channel sooner!
Hey Badabing! So guess what, I bought a WE G36c from taiwangun on black friday and 4 extra mags. (In no small part thanks to your praise.) But TBH thanks to the bad luck I had with my two latest buys (WE Apache A3 and LCT G3) I dreaded it. And then the gun came and I inspected it tip to butt (just how the navy likes it - if you're a Garand Thumb fan ;-) ) and I could find no flaw and also no mags leak. Literally the only two small complaints I had was that the bolt release button was stiff and not all mags clicked in that positively, you have to go in in an angle towards the back. And then I've put two BBs through a chronograph, the first came out at 130m/s the second 129m/s (in around 20°C (68F)). WHAT THE HELL, that's DMR territory, around 1.7J! Your chrono results are much lower and taiwangun also showed 1.2J on the product page. Do you know what's going on? Does the gun need some sort of a break-in period? It came soaked in silicone oil, does that need to clear out or something?
Hi mate, Congrats on your new blaster! How are you liking it so far? Yes the bolt release is very stiff, thats just how it is. I really want to get my HK extended bolt release fitted but I just don't have the time atm. In regards to the DMR speeds, thats pretty typical of units direct from Taiwan. Others can arrive which feature EU nozzles and those kick out friendlier readings. Mine may be one of those EU nozzles with longer tabs on the rear nozzle half that push the cylinder farther forward. The one which originally came with mine was a green nozzle, must have been a generational improvement -although it had an FG 20% Restrictor disc *AND* an NPAS! Completely strangled the gas system where it performed terribly. Seeing as I had an earlier nozzle which was completely stock I swapped them over and thats the one I used for this review. No breaking -in required to be honest. Clear out any silicone that may have seeped into the chamber and away you go. It doesn't ask much from you, just gas and go.
@@BadaBingPictures Yes, but taiwangun.com is a store in Poland so I expected 1.2J from the gun. Anyway, I'm gonna have to do something with it... I may look around on kyairsoft, do they respond to emails if I ask them? THB those 2 rounds through the chrono are the only ones fired by the gun. When it arrived my city was under a 2nd round of lockdown, which ended successfully last weekend (well, realtively, infection rate dropped 1‰) but now the weather is pretty bad so I can only admire the gun for now. And it looks surprisingly good. Much better than it's price would suggest. I've seen a "tactical bolt release" on begadi, which would probably help, but it's out of stock :-/ They also have a nozzle set so I'm going to ask them. My nozzle is a strange grey colour, I don't know what is up with that. Some people say that the NPAS is not very stable so I'm not eager to fit one of those in the nozzle.
Oh right. I've never bought from taiwangun so I wasn't aware. They responded to my messages on FB and IG, give it a shot. Ah yes. You're right about the grey colour, mine is the same but I see it as green as my eyes have a hard time with colours. I would rather cut the chrono readings with a different inner barrel rather than cut off the gas with an NPAS.
@@BadaBingPictures That's a good idea, because then I could go for a crazy jet, those work well for me in 3 other guns. Any suggestion on what length I should try? I know I've asked you before about the usual speed gains/losses with one unit of barrel length/diameter change and I swear, this time I'll write your response down. Social media is not ideal to search previous comments. You should check out taiwangun, they have pretty good prices and fast shipping (at least inside the EU, IDK if brexit changed anything for you guys). And their black friday deals were real. And their staff is helpful. Unfortunately they don't have as many gas blowback stuff as for ex airsoftpro.cz
@@BadaBingPictures I can buy a crazy jet from a local store but should I go for the 200mm or the 180 or even lower? The 150 is out of stock, but there's a 138. They are all 6.04 just like the stock barrel (at least if you can believe what taiwangun says about the stock barrel, I'm too afraid to stick calipers into an inner barrel, I may scratch it).
Thanks mate! The flash hider spins in such a way that it creates a clean vortex for the BB to travel through and leads to greater accuracy. Don’t tell anyone or we’ll get in trouble 😉
As every WE gun in our airsoftteam broke, even the expensive RA Tech tuned one which cost around 1000 €, i started to hate this company for eternity. There where: the ak47u, m16a1 vietnam, smg 8, around 4 Glock 18c. Every single gun of these broke and lacked extremely in therms of cooldown. WE go to hell!
I’m the same with VFC. At least WE guns have a high chance of working out of the box. VFC doesn’t bother finishing them in the first place. Personally I’ve never had a bad WE gun. And any parts required are plentiful and cheap, no complaints here.
Most WE Guns absolutely suck, youre absolutly right. The Ar15 receiver parts are so unfathomably soft, once broke the fittings of the dust cover right of by just closing the dust cover. To be fair, the we g39 ist one of the best WE rifles performance wise regarding hop, gas efficiency, and body reliability (that I even have to say that). But long term everything brakes. There are even parts in the antiquated trigger groups which make no sense (this little silver thingy which traps the striker and when worn out jams the gun, until you remove it completely - which changes nothing...). The other guns are so abysmal in terms of cooldown, won't even start in this department.
@@BadaBingPictures did you ever try out a KWA lm4? these have rock solid internals ootb which last forever, so initial flaws have been ruled out quite fast by the company, gas efficiency is with the best gbbr rifles and you can even fire the gun reliably sideways (not that it makes sense most times because of the hop up). So many people are mocking the hop up systems, but its actually quite good once you understand how it works (which most people doesnt seem to bother with and complain all over the internet). With the maple Leaf hop rubbers and the stock assembly its very good for a gas gun indeed.
@@marcelschultz4033 I haven't tried the KWA LM4. But to be honest with you I have no need to. Not when I have the GHK and TM M4's. The LM4 doesn't offer me anything more than those other platforms. Plus they're not very well supported where I am, so it wouldn't be a wise investment.
@@BadaBingPictures You can get mostly all parts from rainbow8 in taiwan or from the kwa pro shop, which both are fast and reliable. I'am kind of a KWA advocate here in germany for the lm4 since the beginning (we first got it in 2016, years after release afterhaving to tinker endlessly with WE crap ARs). I also repair GBB rifles as hpbby for the gbb community, especially KWA stuff. Its compared to all the other systems the most reliable one with the best low temperature gas efficiency. I play mine since 2016 exclusively as my primary gun, as a side note. Way ahead of VFC and WE and absolutely in the league with GHK (which I also like), but with a little bit more refined and quality internals stock. Was just interested if you ever tried one, since you had some trouble with vfcs and stuff. cheers
My condolences to your loss Should I get this or the Army version? From what I see in the reviews, Army's version has steel FCG but heavier mags and bad bucking.
Love the vid, best WE g36c review on RUclips. This GBBR is my first airsoft rifle, after 4 years of using, it still holds up well, but the outer barrel has some wobbling, is there any ways to fix it?
Thanks buddy. FG Airsoft used to make an upgrade barrel nut and that reduced or eliminated the barrel wobble. Although that company no longer exists. You can try and lap the outer barrel lugs with electrical tape and see if that takes out the slack.
Hey man just found out that u can screw off the extended recoil buffer (the rubber looking thing in the recoil buffer) so the bolt can travel fully just like what i wanted and wanna test this out since but im concerned that is this can cause bolt override or even damage my gun or just reduce the ROF in exchange of a more realistic action?
Probably not a good idea tbh. It’ll be metal colliding with another piece of metal. Might mush up the back of your bolt carrier or deform the piece where the rubber buffer screws onto. Likely both. At best the bolt will travel an extra cm. Not really a boost in realism.
They’re both the same thing. Both are G36’s made by WE Tech. When they first released it, it came under the name G39 and later in they changed its name as 999 to further avoid copyright. At least this is how I understood it anyway.
@@BadaBingPictures Ah okey, thanks man! I just bot it, i stoped when understand that it very difficult to find magazine in the market, so i started looking for another gun, it's so stupid - not selling magazine for this gun. Maybe you can sugest me smt new model? thanks
Thanks mate. They share the same internal components. The only differences being the bolt catch assembly and the AR’s have a one piece selector. I have some RA Tech Steel Internals that came from an M4 originally and it’s a perfect match for the G36. Cost saving on WE’s part if they can use the same parts. The trigger pack themselves are slightly different to account for the G36 bolt release.
Not sure on VFC or Real furniture. (Real carry handles fit i believe) I’ve seen a few people that have installed the Ares B&T rail successfully. No word of any fitment issues.
@@HK-wq1ei It’s definitely not compatible. I bought a real HK extended bolt release for the G36 and it goes straight up through the trigger pack to catch the bolt. On the WE G36 this presents a huge problem as the valve striking assembly is right where the extended bolt release would be for the real one. If that makes sense? Then the WE version bolt release is reversed. Push up to release. On the real/VFC 36 it’s push up to lock open, and with the extended paddle it’s push down to drop the bolt. I am in the process of cutting off the L shaped part to attach to the existing WE button catch, and reversing the mechanism so it corrects the operation. RA Tech were working on a similar upgrade many years ago but seems they abandoned that idea.
Sorry for your loss mate.
This is always my go to recommendation for new players and there must be 5 of them on our team here. 3600NT (100 quid) is cheaper than all the pistols I've bought here...
Did you replace the whole trigger set with the RA Tech kit? I put it in my original FCG after I wore down the original sears and it always seemed a bit sticky on the reset, so I put a teammates donated original FCG on mine.
Valve striker wore down on my original and now on my replacement so I'll be doing a video of transplanting the RATech enhanched striker from my old FCG to the newer one soon.
Also had the brittle mag issues with two of my four mags breaking the screw retainer tabs that hold in the gas cartridges at the base. And shedding the connector studs. I've just taped mine together solidly in pairs now to make it easier, although I only tend to carry one pair in the gun for fast changeovers because the mags are a ballache for pouches (HSGI tacos work well for single ones).
I broke the front end of the gas nozzle twice doing full auto in tropical heat, and then sheared the back end of the nozzle and seal o-ring off once, but now I have about 3 different nozzle set ups to mix and match parts from, and a spare bolt. Broke the charging handle off twice rough handling it, might get the RATech one of those too. And the bolt stop and related magazine tabs have worn a bit on mine but all still work great thus far.
Besides all of the wear I've imparted on it (mainly because I love it and have used it as my go to for so long due to reliability, recoil and accuracy using 0.3g BLS BBs) it's still an awesome workhorse and dirt cheap, easy to service and repair.
I've probably put the best part of 15-20,000 rounds through mine here, although it's hard to keep count.
Rest In Peace Pete! 🙏
Did i miss something?
@@DzasterNL yes, the intro
The G36 by WE, also our recommendation for the gbb community.
Our condolences for Pete. May he rest in peace.
Looking into getting a gbbr is this Better than the Ghkm4?
@@checkmate058 It really depends on how you look at how you define better. The GHK m4 has some big advantages that the G36 by WE doesn't have. The GHK m4 can use the Devilhunter mod. This is modifying a greengas mag so it can accept co2 which the G36 can not, it will blow up the magazine. Parts availability is also very good for the GHK m4. However, the WE G36 does score really well for it's value. It's not darn expensive. They go between 200-250 euros while a GHK m4 will go for about 600 euros and higher.
@@checkmate058 also if you want a cheaper way into GHKs then you could always go for a G5 as the mags are compatible.
The ghk g5
The WE G36
And the WE Mp5
Are all good starter gbbrs in my book.
@@James-C24 kinda had my heart set on a m4 platform coming from real firearms and loving realism. But this review threw a little wrench into that when he raved about that other design.
@@checkmate058 ive got a ghk m4 and its a great gun. Not fired it yet out on the field but i gassed the mags up left them for about 7 to 9 months got it out a few days ago. Mags still full of gas and it ran like a train. No bbs as i was indoors but its a great reliable platform. If budgets an issue start with a g5 and build up a collection of mags or carry on saving and go for the m4. Either way with a GHK you wont ever be disappointed. You also won't need to do any upgrades to them really certainly not out the box.
Just dont by a WE if it takes an M4 style mag just dont their shite. Ive had more issues than id care to mention with my we 416. Unless of course you want a PDW then the we pdws arent bad but i think they have proprietary mags.
Although ive heard of QC issues on the new ghks so that's something to bear in mind.
I'm really sorry for your loss. Having lost a few friends over the years it's always weird what stuff about them sticks with you and what things bring nice memories of them.
Grate review! I've still not got myself a WE g36, I really should as they are cheap and it would make for a grate indoors or loaner gbbr for letting friends use as who wants to use an AEG (in the words of a pal of mine who came airsofting with me the other weekend 'I'm not using the silly hand blender sound gun it's not fun). I think the only thing putting me off is how much I just don't like the design of the G36 having a strong leaning towards more classic looking (really old) blasters... That said I could make one look like something from dominion tank police...
Thanks Jess. Even little things we remember about them, jokes and stories they told. All those moments will eventually be lost in time like tears in the rain. - Roy Batty.
I know what you mean. Its a very modern looking blaster. I was never much into them but over time they've really grown on me. I think you'll really love how it runs, its a pleasure to shoot. Oh yes, AEG's...how dull!
Condolences for your loss.
PDI makes a replacement striker btw, steel, very good.
My condolences for your loss dude. It’s never easy to lose people close to us. But unfortunately such is the circle of life. Best thing we can do is keep our heads up high and cherish our memories with them. It’s cool that this hobby helps you remember the good times you’ve had with Pete. It’d sure do the same for me if I lose any airsoft friends.
Bout the rifle: the G36 platform has always been a gorgeous rifle to me, and the original CoD 4 back in 2007 made me fall in love with this gun. I’ve always wanted a g36c since, and I had a crappy “dual power” one lol but it’s high time I get a better one. This will absolutely be the one I choose. I’m already picturing how I’d want to doctor one up: an aimpoint comp sight, flashlight on the side rail, a working PEQ red laser in front of the optic, maybe a vertical grip underneath, one of those Laylax external bolt release levers if I can find em, and perhaps a tracer unit suppressor. That’d make this an incredible tactical indoor blaster for me. Not being able to drop my mags for speed loads would bum me out a bit but I can sure get over that.
Thanks for the videos as always man, can’t wait to see more as always, cheers! ☕️
Thanks brother.
Oh yes. That game was amazing!!
The follow-up games were too complicated and there was far too much choice. COD4 was basic and that made it interesting.
Sounds like a good idea.
Well, you shouldn’t be dropping GBB mags anyway ;-) too bloody expensive to risk it.
Glad you enjoyed the video. You’re very welcome, it has been a long-time coming.
@@BadaBingPictures no problem man 👍🏻
And yeah! That game is what got me into more realistic modern military FPS games. CoD has fallen flat on its face a lot recently but I love the new modern warfare. I love the variety of gun customization and the gunplay itself. Having modes that are more simplistic like Cod4 would be very cool though.
And haha yeah I know 😅 I used to drop my m9 mags all the time and eventually only one of them started leaking. I’m lucky nothing else happened to them lol. Practicing tac reloads without dropping them is key however. Having good pouches will allow for a faster reindex of the mag to the pouch. But now when I get into rifles I’m for sure gonna have to keep in mind the added weight falling to the ground if I drop them.
And hell yeah dude! I always enjoy the videos. Love the way you do em! 👍🏻
Hey Badabing, sorry for your loss bro! Always missing your posts!
RIP Pete (Pedro) Andrew
I was lucky to come out the other side of cancer.. 🙏🏼
Best of luck to anyone dealing with such times
Ahhhhh! Glad to see a new video :)
That intro sure hit me in the feels, sorry for your loss. May Pete skirmish on in the afterlife.
F#¤in get 'em Pete!!
Thanks mate. He was legend.
Sorry for your loss man. We can see Pete was warm, happy and good man. That is amazing tribute to your friend. Love your channel. I bought MWS because of you. Cheers man.
He was a great guy. A true legend, and we miss him dearly.
Thank you for your kind words. Really appreciate it, mate. Glad you got yourself a TM M4. Awesome to hear.
Great video as always and great tribute to your friend.. My condolences.. May he rest in peace
Condolences for your loss mate, Pete sounded like a absolute legend.
On a lighter note, this video rekindled my love for the G39. Definitely going to blow the dust off mine and show it the respect it deserves. Thanks for the reminder!
when the bois cried.
sorry for your loss. he looks like such an amazing person.
Another fantastic proffessional video!
And a briliant dedication to Pete at that.
RIP Pete. You had a great life and great friends. May the Lord bless the family and friends
Excellent video and very touching intro. Keep safe lad.
Cheers buddy!
Great platform always a solid first GBB go to! and a awesome tribute!
My condolences man. Great Review as always. I still wish I got one of these when I got the chance. Hard to find nowadays.
That was very informative thank you for your video
You are very welcome. Glad you got some helpful information from it.
Thanks!
In the times of loud RUclipsrs with rubbish diction and poor vocabulary you are so easy to listen, pure pleasure. You got yourself a follower :) and you convinced me to look for this replica to buy :)
Welcome to my little corner of RUclips, Mr Jaworoski.
Good to see you. Thanks for watching, and I'm thrilled you're enjoying my content.
Yes this G36 is a lovely replica and fun to use as well. I think you'll like it.
Condolences for Pete! Excellent videos. You've convinced me to purchase the WE MP5K!
I have just bought one of these GBBRs! I love it!!!! Sorry for your loss!!
Congrats on your purchase mate.
Thanks! 👍
I bought this gun because of this VDO and will use it in game first time tomorrow. Thx for the great review and sorry for your loss.
That's excellent to hear. Hope you're enjoying it?
All the best!
Thanks for watching, cheers bud.
How did it work out for you? I’ve had bad luck with WE...
RestInPeace Pete, I never knew you but I know you’re a respected guy from this channel.
He’d be overwhelmed with all the kind words spoken of him in this comment section.
Thanks man.
I'm very sorry for your loss. But one other thing I wanted to say is that this review is SO GOOD!
Great tribute to Pete, another top video as always!
Thanks buddy.
Glad you enjoyed it!
Quality work as usual Bing! Take care buddy
Like your vid style. We need u to bring us more other gbb review!!! It'd be awesome.
Thanks buddy, thrilled you're enjoying the material.
I'm slowly working my way through my to-do list. Takes me ages to make just one of these, but I think it's worth it.
RIP PEDRO!! sorry for your loss, this is a great video.
Congratulations on this job, well done!
Nice review man, i love this gbb gun. I had al kinds of gas rifles and indeed this is the best one. Keep It up!!
15:08 OMFG that effect on the muzzle looks amazing. Literally heat comes out of the gun.
Happy days, another Mr. Bing video - cheers mate, like the new indexing/timestamp system, makes winning arguments a whole lot easier.
Cheers.
Had a bit of an upgrade to my mws recently, got a hao bolt and will be experimenting with a g&p buffer, I'll keep you posted, in the mean time if you weren't already aware have a look at the haoptw kits for mws!
On a positive note old soldiers never die, they just hit that great big beautiful NAAFI in the sky, I've got my place reserved - me and JC are gonna knock back a few cold ones.
Ahh Mr Mills, delighted you could join us.
Yeah I thought I’d start organising the review into specific sections for quicker navigation. Hope it plays out okay?
Sounds cool. How come you bought a new Bolt?
I had heard of various new bits available to the Marui M4 system but these days I’ve moved on from that platform.
Cheers bud.
Hah! Neck back a few for me.
@@BadaBingPictures The new bolt is first of all for lightness for winter like your uac number, secondly for a faster rate of fire and lastly for the looks - gorgeous geissele dark desert earth with the logo. It also completes my urgi build, less charging handle.
Great review many thanks for it. You take my doubt away from the replica. I will buy it in the future.
You are very welcome. I’m glad it’s helped you out.
My condolences in regards to the sad loss of Pete. He sounded like a great friend to have.
RIP Pete.
Thank you, James. Yeah he really was, we shall never see his like again.
Sorry for your friend, and thank you for this long term review. Not everyday you get to watch a review after a decade. This gbbis now in my wishlist.
Another great video, I don't know why but I do have a soft spot for the G36 with different hand guards (I have the grenade launcher one) and the upper rail can be changed for the scope in rail one, on a different note if you ever want to do a video on the KC02 (best DMR Gbbr) you could always borrow mine (I'm always passing by your way), for that matter I'd even lend you my new GHK AK74M
I am terribly sorry for your loss, may God rest his soul in peace.
Thanks Bud 👍🏻
sorry for your lost badabing! *raises coffee mug* here's to pete!
its interesting how you worked your way back to this rifle. or maybe it worked its way back to you? clearly you have great memories from back in the day running it with pete!
I think it's worked its way back to me to be honest.
Thanks man.
Yeah, I have fond memories of running and gunning our G36's. He also had the G36E and that was cool.
You have my condolences.
Imagination by 2WEI nice, always wanted to use it for something like you did.
I’ve had the pleasure of using 2WEI’s music a few times. Phenomenal music.
Ah finally. Another video Please do more . Its lockdown again no excuses
Got several things lined up, just give it time and they will come.
I’m a key worker! Never close and open 7 days a week.
@@BadaBingPictures film while at work. No excuses
Her Majesty would kindly disagree. Not even chewing gum is allowed on site, let alone camera equipment and toy guns!
Patience my friend. Halfway into another review and that should be arriving this month. 👍
fantastic video
If I were to buy one of these the biggest question would be which variant to go for. I suppose given the extremely competitive pricing (along with getting the most from your mag's) the argument could easily be both. A great review and definitely food for thought.
Condolences for your loss, it's never easy losing people you care about.
They used to make K and E upgrade packs so you could upgrade your C if you had one already. KY Airsoft can provide the spare parts so you could build whatever you wanted.
I never touched the K variant but Pete owned the E version as well. It was lovely having that full sized G36. Added a little bit more weight and that naturally soaked up the recoil so it wasn’t as hard as the C. Still, it was badass.
Depends on where you see yourself playing.
Thanks for watching, mate.
Cheers for your kind words also.
@@BadaBingPictures appreciate the heads up, I'll have a look and see what I can find out.
I'm leaning towards the C as I do a fair amount of CQC stuff but I don't think I've ever seen the Helstodt (spelling probably wrong) dual optic on a C. Admittedly that's not an issue but I'd part with my TM G36K and keep the sight as they're hard to find.
@@FreeFragUK The C works out fantastic in close quarters so it’s got a great loud bark and snappy too. Trouble is the stock over here for any gas G36 is a bit limited.
sorry for your loss....
I'm sorry for the loss of friend which Pete . May He Rest in Eternal Peace (in Heaven). I'm sure He's happy looking from above and seeing this video is made to Honor Him .
Thanks mate.
@@BadaBingPicturesNo problem .Thanks for video
Thanks a lot. Now I have to spend 200€+
;)
Sorry to hear about your friend; may he rest in peace
I’m sorry for your loss
Thanks mate.
Love the moustache by the way ;-)
@@BadaBingPictures thank you comrade
If these were in stock anywhere in Canada I might have picked one up instead of an MWS MK18 for 950CAD. I also noticed in the tear down there was a rubber buffer to absorb some of the shock of the bolt hitting the receiver. Why this isn't standard on most GGBR's like the GHK G5 is beyond me. My Kwa VZ.61 has something similar and the thing its rock solid, whilst I read that MP7 and MP9 polymer bodies crack all the time.
Rest In peace😥
Also had one for quite a long time, it's still alive and kicking, but sadly something weird has happened to auto-fire, it's tripping a lot there, while single fire works like a clock, haven't really got there yet. I also have quite an early model, so yeah, taping the barrel nut to have a better outer barrel fix is required and the hop-up unit was actually really crappy, I was needed to shim the hop-up arm (notch was actually too small for the stock nub, so it was applying too much pressure on the rubber), then with a new rubber it wasn't enough, so I've exchanged the nub with H-nub and it's working great and became perfectly aligned (some other nubs I've tried were inclined to tilt in a single direction, so hop-up was also uneven and that hurts accuracy big time). Absolutely agree on that the gun is probably the best entry ticket to the world of GBBRs - pretty affordable, while maintaining a descent level of quality.
I just cut off the side tabs and remove the bottom plate of the mags to make them easier to index in my mag pouches
This channel deserves more subscribes and no. of views
We are still young...
at 8:17 , is it bolt carrier made by steel ? ( I see the magnet sticked on it ) ?
Very great details review.
The bolt carrier is not steel but it has a steel insert for the bolt catch and that makes the bolt lock nice and durable. 👍
Thanks for watching
@@BadaBingPictures wow that's awsome!
Rest in peace brother
I have one of these and love it. Modified mine to a G36K A3, shooting 400 fps with .20g bbs. Only issue I have with mine is it eats the nozzle o-ring might be a issue with the ra tech nozzle but the stock nozzle shoots too hot for the fields I play at.
6:35 ironic considering the German military sued HK in real life over the fact the magazines used to just fall out from time to time
Sorry for the loss of your mate
Thanks Mike, hope you enjoyed the vid.
All the best
Does anyone know what happened out of the blue where these things just dissapeared from like all archives and everywhere in the US?
They’re practically never heard of besides outside of the states. I owned one a decade ago and ended up selling it because I could never find replacement parts, regretting that now that they seem to be a sought after item
Guessing HK and trademark issues
Grab one if you can. All WE GBBRs with the open bolt system use the same internals, you can take the WE KAC PDW or 416 or M4 or G36 Internals and swap them out, since the firing group has the same parts for all these gbbrs, all have the same internals. Josef Mucha did a video about this if you are interested in finding out more about it.
I own the C variant already had to buy a new factory nozzle I only put 200 rounds through it with green gas and just today in the cold a part of the nozzle broke off where it locks into the hop up chamber I'm not sure what caused it if anyone can help also does anyone know the difference between the grey nozzle and the black one some we g39s have a black one I own two they both have grey nozzles 🤔
nice video mate x
15 years ago...I'm gonna be old in the corner.
The most wholesome video I've seen so far this year.
Perfect way to end it, may Pete rest in peace.
Hi Ryan,
Thanks for watching the video. Delighted that you enjoyed it, and thanks for the kind words.
All the best for 2021
Good review. Was it the barrel or just flash hider that was loose? Its turning at 14:34
Thanks!
It was just the flash hider that came loose.
@@BadaBingPictures you got me thinking of getting one. Lol. I’ve had several WE before. Usually hold up ok. If you understand that knockers and trigger parts do break. I like the deal for under 200. And hk stickers are available online. Lol.
Is this compatible with green gas and propane?
Yes. It’s designed to be used on GG/Propane.
@@BadaBingPictures awesome thank you!
Nice video and editing bud, does anyone know if i can make this dry shoot? as i do film work. I have the Army Armament R36-K
Where's that Grim Reaper at? That entity needs an ass whooping. I'm sorry for your loss, RIP, Pete.
I know right?!
Thanks, mate. Really appreciate your time commenting. Cheers!
i had those G36K and C, installed a we PDW inner barrel by Laylax/prometheus . Shoots 450fps for The C type, and 520FPS for the G36K with modified prometheus AEG inner barrel 363mm
rock solid never failed to shoot, that barrel wobble can be remedied if u use Ares B&T style Handguard with a little filling .
my only complain is just the magazine case. just like your video explain. overall a very reliable GBBR. hammer destroyed after 4 years.
if u want to upgrade the trigger set i suggest only to change the hammer with the ratech one leave other stock
Hey Badabing! Always awesome to watch one of your videos. And you've made this one just for me, I've asked for it a few weeks ago and there it is ;-)
I have a question, I think I've seen in one of these game footages one with a carry handle with the integrated optics although I can't find it again by scolling through. Anyway, do you know if it can take one of those AEG carry handles with integrated optics? You see for me it doesn't have to be such a precise replica, a WE G36c with one of those carry handles would be a good enough Stargate gun.
So sorry for your loss man! Unfortunately our airsoft goup has also lost a comrade a couple of years ago, it's horrible, he was also too young to pass away.
Thrilled to hear you enjoyed my video.
Thanks bro.
Yes, I’m my gameplay footage I was actually using the old classic scoped G36 carry handle. (Although just out of shot)
Can’t remember the brand but it was for an AEG and it bolted on perfectly.
Sorry to hear that. Awful, just awful.
Always a reminder to take as many photos and videos as you can.
Would it be productive to loctite or glue the magazines together to gain the practicality of the mag coupler?
You can do that, sure. Although I found these mags too chunky on their own, let alone clamped together...and removing them out of a pouch can be trickier as its a bit of a UNIT.
Sorry for your lost
Im pleased you're having all that props such as a flecktarn jackrt abd so.
I could only running VFC ones lol
And it seems Im the only picked the lemmon among my friends
Thanks buddy.
Oh yes. I love Flecktarn. It was my first camouflage that I bought for Airsofting many many years ago.
I just had to have some German decoration for the table. I've just got some Lebkuchen as well, so the next H&K GBB will have that ;-)
I haven't had the pleasure of the VFC G36. It looks great.
@@BadaBingPictures Well, the pleasure of VFC is using RS parts and assemble to KA4 configuration, which is the wildest dreams you can get for a G36 .
The problem VFC is the same old problem ,you hardly get support parts once production ceased, just like dirivng a Lancia sometimes
I dont know it is kind of sorrow seeing such ppl leaving us, either ito the eternal life or other reasons they have. However, I would always be glad know ppl playing airsoft and caring others like that
Just received some bad news about an old friend this morning. Fuck Cancer. What are the odds that this is the first video that I click on this evening? Must mean something right? I'm sorry for your loss, It's more than obvious that Pete truly meant something to you. I'm sure he still crosses your mind. The intro was a beautiful tribute. I think we all could have been friends with Pete.
Sorry to hear that mate.
Not just our friends and family, but our 4-legged family too. Just heart wrenching.
Thanks. I still come across old photos that I thought I had lost. So it’s nice that he’s still fresh in our minds.
Yep. He was one of those guys that could break the ice in any situation. Total legend.
@@BadaBingPictures Thank you for the kind words. Really means a lot.
Have you had a chance to use the Umarex/VFC model yet? If so, how do they compare?
Got my h&k 416a5 gbbr today after waiting 2 and a half months and man was it worth it zero barrel wobble and locks back 100% very pleased with it on your video you did the crono and was getting 480 isn’t 480 on full auto illegal?
Congrats. Happy new gun day!
Another solid unit feedback, thanks for letting me know. Issues are rare nowadays.
Regarding the FPS, I can’t remember that far back but if it gave me 480 then yeah probably. 🤷♂️
@16:46, yours has HK trademarks? how?
That's a trademark sticker. Those used to be available from Boom Arms Airsoft but I think they're all gone now.
Im sorry for your lost man but is there a fx-05 and a sig sauer sig516 in Airsoft??
That is not bad for that one part is the only to break. Which means parts are easy since it is a known issue but since other companies make steel versions for that part that means this is a really great gun.
Hi guys, I've this gun and I've already broke 3 nozzles after having a cooldown and releasing all the gas.
Everything else looks fine inside the gun, the hammer is still there too, so could it be the gas or a broken mag causing the issue? I'm using a silicon based green gas which gave me 0 problems on my pistol.
Great review. There is an Army Armament version which is a cheaper version of the WE version and requires the "upgrade" parts quicker due to breaking. Would be worth seeing a video of that for comparison.
Hi bud,
Thanks for watching. Glad you liked it!
I've seen the Army version and I'd like to look at a comparison but I just don't have the budget nor the time to dedicate to it. I hear their magazines are considerably heavier than the WE. So I would rather buy the WE magazines and save on weight, even though they're likely to be more expensive.
Anyone who has ever shot a G36, either a fake one or a real one will tell you, if you have to touch the charging (NO) maintenance handle outside of maintenance, youre using it wrong. The g36 is meant to cut costs. It cheap to produce because of the polymer, the real magazines are less than 5 quid each, its easy to take apart and maintain, and on top of it all, using it get so much easier once you discover the secrets of the bolt release. If youre a right hand shooter, lay your left hand around the magwell, such that the gun rests on your left thumb with the bolt release and give it a fiststrike on top of the buttstock with your right hand and the bolt carrier will jump forward. Similarly you can also angle it 45 degrees to your left (positive mathematical sense, negative clockwise) and you can also use your right hand and fiststrike the right side of the gun to release the bolt. If youre a boring man, you can also just release with your left hand by tilting your left hand away from you.
Hotter gas... But if it's cold, then that gas is probably not more powerful than GG in summer temp? or is there something I misunderstand?
Yeah I suppose you’re right. It’ll even things out.
The gas seals on the magazines are 1mm thin wide o rings. I think any high pressure gas will just blow them out if it’s in comfortable temperatures.
The gun is now for well known for its copy, the Army Armament R36. Out of all GBBRs from WE Army Armament copied the G36c, that's says everything about the design.
Apache mp5 would need a copy
RIP brother
Golden Eagle make WA AR15 platform GBBR's. Cost same money like WE g36 and you start with Full Steel TCG, this is another platform with promising upgrades potential without pot metal TCG.
ware can i get a inlet gas valve for the g36 mag need help fineing it
Begadi
Milspec
KY Airsoft
A few other places but you’ll have to ask google to know for sure. I’ve used WE G17 GBB Pistol valves in the G36 Mags too.
Bing...that trigger box and bolt looks a lot like the We Tech SCAR H counterparts
There’s a lot of parts commonality with a few of their GBBR’s. Their M4 can accept bits from them too.
@@BadaBingPictures after watching this kinda makes me want on...I've got a bead on a used one with 5 mags for about 300bucks. And it has the HK trades on it too
Hmmm that is tempting...
Still got that G3?
@@BadaBingPictures oh yes the g3 is doing fine...I stuck a 300mm crazy jet with a 70 degree autobot in it...she is a tack driver!! People on the field hate me for it...I can hit shots with it up to 200ft..but then all my gas guns do that...on another note...I've recently started a facebook page...ghostwalker airsoft tech..take a look...nothing fancy yet. I've been off fb for about 5 years now so a lot has changed and I'm still feeling my way around..take a look if you are so inclined.
Super awesome video man! Do you plan on getting the WE Scar H?
Thanks! Great to hear you enjoyed it.
I don’t plan on buying the WE SCAR, sorry man.
@@BadaBingPictures Thats fine i totally understand. You make me really want to pick up an MWS. Keep up the good work dude! Really enjoyed your content. Wish that i had discovered your channel sooner!
@@Jerv165 Hah, you should totally try an MWS out. You’ll love it!
Thanks for joining me on here, I’m thrilled you enjoy the content. 👍
Hey Badabing! So guess what, I bought a WE G36c from taiwangun on black friday and 4 extra mags. (In no small part thanks to your praise.) But TBH thanks to the bad luck I had with my two latest buys (WE Apache A3 and LCT G3) I dreaded it. And then the gun came and I inspected it tip to butt (just how the navy likes it - if you're a Garand Thumb fan ;-) ) and I could find no flaw and also no mags leak. Literally the only two small complaints I had was that the bolt release button was stiff and not all mags clicked in that positively, you have to go in in an angle towards the back. And then I've put two BBs through a chronograph, the first came out at 130m/s the second 129m/s (in around 20°C (68F)). WHAT THE HELL, that's DMR territory, around 1.7J! Your chrono results are much lower and taiwangun also showed 1.2J on the product page. Do you know what's going on? Does the gun need some sort of a break-in period? It came soaked in silicone oil, does that need to clear out or something?
Hi mate,
Congrats on your new blaster! How are you liking it so far?
Yes the bolt release is very stiff, thats just how it is. I really want to get my HK extended bolt release fitted but I just don't have the time atm.
In regards to the DMR speeds, thats pretty typical of units direct from Taiwan. Others can arrive which feature EU nozzles and those kick out friendlier readings. Mine may be one of those EU nozzles with longer tabs on the rear nozzle half that push the cylinder farther forward.
The one which originally came with mine was a green nozzle, must have been a generational improvement -although it had an FG 20% Restrictor disc *AND* an NPAS! Completely strangled the gas system where it performed terribly.
Seeing as I had an earlier nozzle which was completely stock I swapped them over and thats the one I used for this review.
No breaking -in required to be honest. Clear out any silicone that may have seeped into the chamber and away you go. It doesn't ask much from you, just gas and go.
@@BadaBingPictures Yes, but taiwangun.com is a store in Poland so I expected 1.2J from the gun. Anyway, I'm gonna have to do something with it... I may look around on kyairsoft, do they respond to emails if I ask them?
THB those 2 rounds through the chrono are the only ones fired by the gun. When it arrived my city was under a 2nd round of lockdown, which ended successfully last weekend (well, realtively, infection rate dropped 1‰) but now the weather is pretty bad so I can only admire the gun for now. And it looks surprisingly good. Much better than it's price would suggest.
I've seen a "tactical bolt release" on begadi, which would probably help, but it's out of stock :-/ They also have a nozzle set so I'm going to ask them. My nozzle is a strange grey colour, I don't know what is up with that. Some people say that the NPAS is not very stable so I'm not eager to fit one of those in the nozzle.
Oh right. I've never bought from taiwangun so I wasn't aware.
They responded to my messages on FB and IG, give it a shot.
Ah yes. You're right about the grey colour, mine is the same but I see it as green as my eyes have a hard time with colours. I would rather cut the chrono readings with a different inner barrel rather than cut off the gas with an NPAS.
@@BadaBingPictures That's a good idea, because then I could go for a crazy jet, those work well for me in 3 other guns. Any suggestion on what length I should try? I know I've asked you before about the usual speed gains/losses with one unit of barrel length/diameter change and I swear, this time I'll write your response down. Social media is not ideal to search previous comments.
You should check out taiwangun, they have pretty good prices and fast shipping (at least inside the EU, IDK if brexit changed anything for you guys). And their black friday deals were real. And their staff is helpful. Unfortunately they don't have as many gas blowback stuff as for ex airsoftpro.cz
@@BadaBingPictures I can buy a crazy jet from a local store but should I go for the 200mm or the 180 or even lower? The 150 is out of stock, but there's a 138. They are all 6.04 just like the stock barrel (at least if you can believe what taiwangun says about the stock barrel, I'm too afraid to stick calipers into an inner barrel, I may scratch it).
Great video, keep up. At "Fully auto performance" the flashhider started to rotate and tried to come off xd.
Thanks mate!
The flash hider spins in such a way that it creates a clean vortex for the BB to travel through and leads to greater accuracy. Don’t tell anyone or we’ll get in trouble 😉
@@BadaBingPictures I'm sure of that. ;)
As every WE gun in our airsoftteam broke, even the expensive RA Tech tuned one which cost around 1000 €, i started to hate this company for eternity. There where: the ak47u, m16a1 vietnam, smg 8, around 4 Glock 18c. Every single gun of these broke and lacked extremely in therms of cooldown. WE go to hell!
I’m the same with VFC. At least WE guns have a high chance of working out of the box. VFC doesn’t bother finishing them in the first place.
Personally I’ve never had a bad WE gun. And any parts required are plentiful and cheap, no complaints here.
Most WE Guns absolutely suck, youre absolutly right. The Ar15 receiver parts are so unfathomably soft, once broke the fittings of the dust cover right of by just closing the dust cover. To be fair, the we g39 ist one of the best WE rifles performance wise regarding hop, gas efficiency, and body reliability (that I even have to say that). But long term everything brakes. There are even parts in the antiquated trigger groups which make no sense (this little silver thingy which traps the striker and when worn out jams the gun, until you remove it completely - which changes nothing...).
The other guns are so abysmal in terms of cooldown, won't even start in this department.
@@BadaBingPictures did you ever try out a KWA lm4? these have rock solid internals ootb which last forever, so initial flaws have been ruled out quite fast by the company, gas efficiency is with the best gbbr rifles and you can even fire the gun reliably sideways (not that it makes sense most times because of the hop up).
So many people are mocking the hop up systems, but its actually quite good once you understand how it works (which most people doesnt seem to bother with and complain all over the internet). With the maple Leaf hop rubbers and the stock assembly its very good for a gas gun indeed.
@@marcelschultz4033 I haven't tried the KWA LM4. But to be honest with you I have no need to. Not when I have the GHK and TM M4's.
The LM4 doesn't offer me anything more than those other platforms.
Plus they're not very well supported where I am, so it wouldn't be a wise investment.
@@BadaBingPictures You can get mostly all parts from rainbow8 in taiwan or from the kwa pro shop, which both are fast and reliable. I'am kind of a KWA advocate here in germany for the lm4 since the beginning (we first got it in 2016, years after release afterhaving to tinker endlessly with WE crap ARs).
I also repair GBB rifles as hpbby for the gbb community, especially KWA stuff. Its compared to all the other systems the most reliable one with the best low temperature gas efficiency. I play mine since 2016 exclusively as my primary gun, as a side note.
Way ahead of VFC and WE and absolutely in the league with GHK (which I also like), but with a little bit more refined and quality internals stock.
Was just interested if you ever tried one, since you had some trouble with vfcs and stuff. cheers
My condolences to your loss
Should I get this or the Army version? From what I see in the reviews, Army's version has steel FCG but heavier mags and bad bucking.
I hear the Army versions are okay. But as you say the magazines are very heavy.
I cannot recommend them though as I have never used one.
Thanks Arian.
Love the vid, best WE g36c review on RUclips. This GBBR is my first airsoft rifle, after 4 years of using, it still holds up well, but the outer barrel has some wobbling, is there any ways to fix it?
Thanks buddy.
FG Airsoft used to make an upgrade barrel nut and that reduced or eliminated the barrel wobble. Although that company no longer exists.
You can try and lap the outer barrel lugs with electrical tape and see if that takes out the slack.
Hey man just found out that u can screw off the extended recoil buffer (the rubber looking thing in the recoil buffer) so the bolt can travel fully just like what i wanted and wanna test this out since but im concerned that is this can cause bolt override or even damage my gun or just reduce the ROF in exchange of a more realistic action?
Probably not a good idea tbh. It’ll be metal colliding with another piece of metal.
Might mush up the back of your bolt carrier or deform the piece where the rubber buffer screws onto. Likely both.
At best the bolt will travel an extra cm. Not really a boost in realism.
Please help, i try to pick between WE G39C VS 999c, who can compare it for me i don't understand difference >????
They’re both the same thing. Both are G36’s made by WE Tech. When they first released it, it came under the name G39 and later in they changed its name as 999 to further avoid copyright. At least this is how I understood it anyway.
@@BadaBingPictures Ah okey, thanks man! I just bot it, i stoped when understand that it very difficult to find magazine in the market, so i started looking for another gun, it's so stupid - not selling magazine for this gun. Maybe you can sugest me smt new model? thanks
Great review! Btw, are there any parts in the trigger box that is interchangeable with... Say, the we m4/416?
Thanks mate.
They share the same internal components. The only differences being the bolt catch assembly and the AR’s have a one piece selector.
I have some RA Tech Steel Internals that came from an M4 originally and it’s a perfect match for the G36. Cost saving on WE’s part if they can use the same parts.
The trigger pack themselves are slightly different to account for the G36 bolt release.
@@BadaBingPictures good to see then. Just ordered one after watching your review over and over. Have a great day dude.
Congrats! Enjoy it they're great fun.
Cheers man, you too.
@@BadaBingPictures enjoying the gun rn. may i ask what specific ra-tech parts that you've fitted?
@@grievesatecaga2237 Just their G36 trigger as it’s closer in appearance than the stock WE.
Will this replica accept VFC-Spec or RS Spec Furniture? (Stocks, and specifically that AREs replica B&T Handguard)
Not sure on VFC or Real furniture. (Real carry handles fit i believe)
I’ve seen a few people that have installed the Ares B&T rail successfully. No word of any fitment issues.
@@BadaBingPictures Would a RS HK BAD Style Bolt Catch drop in?
@@HK-wq1ei It’s definitely not compatible. I bought a real HK extended bolt release for the G36 and it goes straight up through the trigger pack to catch the bolt. On the WE G36 this presents a huge problem as the valve striking assembly is right where the extended bolt release would be for the real one. If that makes sense?
Then the WE version bolt release is reversed. Push up to release. On the real/VFC 36 it’s push up to lock open, and with the extended paddle it’s push down to drop the bolt.
I am in the process of cutting off the L shaped part to attach to the existing WE button catch, and reversing the mechanism so it corrects the operation. RA Tech were working on a similar upgrade many years ago but seems they abandoned that idea.
@@BadaBingPictures damn, that''s unfortunate.