99% People Shocked When See This Biggest CNC Lathe Machine Working. Crazy Factory Machines
HTML-код
- Опубликовано: 29 сен 2024
- 99% People Shocked When See This Biggest CNC Lathe Machine Working. Crazy Factory Machines.
🔥🔥 Subscribe StarTech TV: www.youtube.co...
==========
Music:
Total Happy Up And Sunny by Sascha Ende
Link: filmmusic.io/s...
License: creativecommons...
Funkorama by Kevin MacLeod
Link: filmmusic.io/s...
License: creativecommons...
The clickbaitest title I've seen in a while.
YUP ....MORE GOSSIP SOCIAL MEDIA CRAP. StarTech TV is only looking to get people to click.
@@taxicamel yep, i was expecting to see 30' rounds spinning. Nope, just your average cnc
crappy channel
Honestly worse than those pakistani videos that claim to be futuristic while some guy manually grinds a workpiece on some sandpaper glued to an old car wheel
Somehow I am thinking it should be "clickbaitiest" but I could be wrong.
Is that word in the dictionary or is it a new one....lol.
Either way it fits perfectly!
لكنني لم اشعر بالصدمه عندما تفرجت المقطع بل شعرت بالنوم ..
This is the first CNC Lathe I have seen. Great stuff!
I'm just here for the mesmerizing music. Good grooves!!!☆
職人の技がギッシリとコンピュータに詰め込まれているからね。
最後の刻印がカッコいいわぁ(笑
This lathe is not quite as big as the one I run. It can swing 38" in diameter and 128" between centers. But this one has 2 turrets. Cool,
Big is a Wohlenburg or Heyligenstadt machine, or machines with spindle bores above 10" ...and center distances of 20 feet ....and horsepowers above 50 hp.
99% peoples will shocked because they didn't see the Lathe which you have shown in the thumb nail image of your video, aren't you? 😬😬😬😬
Guess I'm in the 1%.
I was a manual machinist for more than 37 years and largest machine i ran as engine lathe was a meuser 9ft chuck and 87ft long
I also ran a vertical turret lathe which table width was 25ft but always swing 27ft 4 inches, and 22ft tall
I'm the %1 that has craned a 1 ton steel shaft into a long bed lathe, centered it and turned steady rest diameters then supported it with a tailstock for between centers turning using a drive dog. No biggie.
Question? what machine made the parts for this machine.Shocked not likely, maybe agog.
Coolant?
Can you tell the technique of manufacturing of hydraulic expanding mandrel.
JUST CHECK AND SEE WHETHER YOU CAN FOLLOW TUBE EXPANDERS WITH FLARING ROLLERS. FOLLOW THE SAME DESIGN AND HOPE IT SHOULD WORK. IF YOU WANT CRAZY IDEAS- MAKE RUBBER EXPANSION ROLLERS i DO NOT KNOW WHAT IS THE PURPOSE OFR YOUR REQUEST. BY YOUR NAME I PRESUME YOU ARE IN INDIA. IF SO CONFIRM- I WILL TRY TO GUIDE YOU ON EXPANSION ROLLERS AND EXPANDING MANDRELS. ALL THE BEST IN YOUR INTEREST IN TECHNOLOGY.
ン十年前に工業高校で習ったCNCと全然ちがう・・・
ほんとショックを受けましたわぁ。
A thumb down just for the lie in the headline!
А мы точим рессцы как 30 40 лет назад, и кречим догоним запад., смешно.
先端の人やばない
Why are people shocked it don't make no sense
이 기계 처음 봤을때 나와야 할 기계가 나왔구나 하면서 무릎을 쳤지.
HECK of a doorknob machine...
I’m not sure what you think a big cnc machine is but this is definitely not one I worked in a fairly small machine shop and we had CNC machines we had to climb inside and walk around inside the chip pan to clean it out these are very small CNC machines!
サムネが巨大イラネッチケーに見えた(笑)
Biggest?
Wont the cutting edges get hot during drilling?
That's normal
هذي الات لو كارثه
Ist ja irrsinnig schockierend.......!
I am shocked as I expected something large, These are not large.
Why would people be shocked watching a lathe do its job ??
Clickbait… just to make audience!
yeah especially for a channel that doesn't show subscriber count
Bad, reputation for using tricky add"99,%will shock heavy CNC,no heavy CNC shown.Cheaters, Liars.
I expected to see really BIG CNC lathes. There were lathes bigger than these where I used to work.
Pure click-bait bullshit!!
Größte Maschine ? Lach........ Da gibt es Maschinen die sind 5-10x so groß
Im assuming that the title lost something in translation when they say "biggest CNC Lathe Machine"....Those things are small, we have Norton and Niles lathes that are 3 times that size and handle parts up to 30' long and 6 foot in diameter. Just another clickbait headline to grab views. On a side note, whoever programmed the "finish pass" on that first lathe should be fired, that surface finish is disgusting.
Help, know anyone who can put a shine on some durston rollers for me? I've been fighting with their excuse of a product
@@lordeverybody872 You need to find somebody who is able to do a process called burnishing, it will put a mirror finish on those rollers easily unless there is significant pitting or gouges, then they may need to be turned and then burnished.
You can put me in the 1% who is not shocked by this.
デモンストレーション用だな、バイトにチップ使ってるとはいえ加工が表面が荒い
切削油使えよ
I am one off the 99% that didn’t get shocked !!!
I must be part of the 1% crowd
Das kann mich nicht erschüttern 😁✋ Wolle 👋👍✋😁
Maybe somebody which has never seen a CNC machine working might be shocked. By my standards, is only impressive.
"99%shocked" tricky add, very bad.
полная хрень и огорчение
Oh man, warum soll ich den schockiert sein? Abgesehen davon, st das lange nicht die größte Maschine. Toller Titel...Das Video ist aber klasse.
Kann mir mal jemand sagen bei welchem TimeCode man die "größte" Maschine sieht??
Das Video ist sogenanntes "Click Bait". Wenn Du das Wort nicht kennst, man versucht Dich zum clicken zu verleiten.
Main products: sealing gasket,gland packing,PTFE/graphite/asbestos products, ceramic fiber products, high temperature heat insulation and fireproof material.
Free technical support (sealing, heat preservation, heat insulation, fire prevention problems)
All products 1 piece can also be customized, 30 years of service experience, fast and safe shipping anywhere.🍖
Das Einzige was mich schockt ist der Bescheuerte Titel zu diesem Video.
Not large at all. Cleanest machine shop I've ever seen though.
Not shocked in the slightest, I've run bigger machines than this.
Where is the half a meter diameter axle from the thumbnail? Stupid clickbait. Thumbs down.
Hmmm, I must be in the 1%. I merely found it vaguely interesting.
I was shocked once, but this video doesn't have a single cup in it.
Die größte CNC-Drehmaschine??????? Wo?
Nothing shocking for me, i've put on 11 tons to my machine and took out 2,5t :P diameter 2500mm. normal working day for me: programming, setup, make parts, servicing. hue hue hue ;)
Bragging cnc machinist he never wk like the old guys we made all our tools old school that why u never get your hands dirty!
چرا این لایک اوکی را اخرین گذاشتن در حالی که لایک اوکی چون نمره عالیه نباید اخرین باشه به امید تعغیر.همین وبس
'
wish to see this video how CNC lathe cut the 120mm cannon gun use on the military tank
It's way more rewarding on manuel machines..And higher precision.. CNC a place to start.
I personally think only 98% of people were shocked the other 2% of people are situated in Australia and New Zealand
nice doubletool lathe and nice video. But big is different. 50t -100t products are big and not the maximum by far. Ein Nähmaschienenvideo könnte man mit den Worten:" sie werden schockiert sein" genauso dramatisieren.
Das soll die größte CNC Maschine sein? 😂😂😂😂
YaY im now part of the 1%
Watch this and then go to the video with the guy being pulled into the machine and made into instant hamburger in ten seconds.
何が凄いって、キッチリ芯が出ていると高速回転していても止まっているようにしか見えないという事実。
マシニングセンタのチャックがキッチリ芯出しされた状態で超高速回転していると、ホント止まっているようにしか見えない。
今の技術はそういうレベル迄達している。
Copied the logo from STMicro, hopefully doesn't copy products....
Why chocked? It's a normal CNC process!!!
It’s not a CNC, it’s a lathe.
@@Engineer9736 its a cnc lathe
99% of people hate click bait titles
Was bitte soll da schockieren 🤔 das habe ich noch von Hand gefertigt. Für mich ist eher schockierend das es heute fast keiner mehr ohne CMC Steuerung kann.
Du kennst dich gut aus ,keine Frage,du weißt und Ruhe
Those lathes aren't very big at all.Try looking at steam turbine rotors shafts being made!!
Hanzhen harmonic gear , strain wave reducer, robot arm gear , over 30 years experience
Je n’ai pas envie d’être choqué c’est pourquoi je ne regarderai pas cette vidéo
Le titre est trop con
正確な大きさは わからないけど ハッキリ言って コレを 最大の… とは言えない。
First one the Finish was a bit Rough TBH...but best of all on that I thought was the Conveyer belt Swarf removal!!!
Get rid of the stupid drama music and let us hear the actual sounds of the machinery, processes, etc
どうせワークはs45cとかだろ?どの工具メーカーも切削テストは45c・・・
Das kann mich nicht erschüttern
Amazing to think of all the great things that were made on manual machines and designed with pencil and paper, real skill !.
Been there done that. Lol
Facts
In those days the computer was in the brains of engineers and machinists.
Die idiotische Beschreibung "Sie werden schockiert sein ..." ist das Einzige was mich schockiert.
i'm a one percenter
1:56 くわえたとこおもいっきり傷ついてるけど後でなおすのか?
Wenn ich das Eingangsbild sehe dann erwarte ich auch diese Fertigstellung und keine Kleinteilfertigung 🤔🙄😭❗
never seen this set up in my whole life! Fascinating!
Click bait... you think that's large you don't get out much
Ok , a machine for serials. for exemple trains ... Not cheap for sure
Precision advanced manufacturing processes are mind boggling, fun to watch and can prove to be a rewarding career for all who aspire to apply themselves!
Thanks for posting a inspirational video.
I guess you win because I'm commenting, but where I work the CNC lathes have 60 Feet between centers and 6 foot swing over the bed. Blew my mind when I started. Needless to say the lathe in this video is tiny comparatively.
Yup - when you load a machine with two 30 ton cranes, these sure look like toys!
@@Motor-City-Mike Yes, a different skill all together, when you move up in size.
.
5:14 where are the chips that indexable drill is making?
Bigger than this on HMT CNC machine. Machining train axle.
It's way more rewarding on manuel machines..And higher precision.. CNC a place to start.
You would be shocked to see the lathe at Alice manufacture it vertical and take 15-foot diameter shaft. 30 foot long. It was not CNC at the time of when it was put in 1900s.
Choqué, le nouveau vocabulaire de ceux qui n'en n'ont pas...
Im SHOCKED ......just like you said.......now what?
I'm either the 1% or still waiting to be shocked.
Show some tool steel being cut. Way harder to deal with
Why are people shocked? Is it so easy to shock people. Get a life
CNC machining really does not impress me, manual machining videos are much more captivating
The clamp design is very clever, it allows machining at the clamp area without moving the part
刀片不合格!!!鐵屑無法形成片狀排出..傷刀具...又危險
Apparently no one has seen the machinery at Pearl Harbor.
Why not show a link to the original creators of all the videos you nicked.
Just out of curtesy.
I'm not shocked... Does this make me a 1%er?
I ran laths bigger than that 40 years ago when you had to be a Machinist. No robot or computer's..
As a hobby machinist, I am in awe of folks that did this kind of work, before there where folks that call themselves machinists as they push a button. Granted they went to school and learned, but when I ask where they manual machinery is, they usually rely, that it is back there somewhere, we aren't allowed to use it.
I must be in the 1% that aren’t shocked I guess.
3:00 I like this song It's got a funky beat with a stone cold grove. The key board is awesome!