Top 10 Most Satisfying CNC Machine In Working. Heavy Duty Vertical Lathe & Mill Turn Center
HTML-код
- Опубликовано: 18 сен 2022
- Top 10 Most Satisfying CNC Machine In Working. Heavy Duty Vertical Lathe & Mill Turn Center
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the RUclips Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above. 
Наука
As a retired machinist I am awestruck at the ability of modern lathes
They definitely aren't your grandpappy's lathes.
I’ve been a machinist for 37 year and never seen anything like it buddy
I admire the people who write the operating instructions for these machines. One mistake and disaster .
As someone who never got beyond a small lathe in a home workshop and who struggled to get 'near enough' dimensions with micrometers, I'm always astonished at the precision attainable with these gigantic automated machines. Very impressive.🙂
It is a dream of mine to someday own my own mini (or medium) manual lathe. I will, someday, but at the moment I just haven't got the space for it, plus I have neighbours that won't appreciate the noise. Someday though... I'm in IT so nothing to do with skilled manual labour but I am fascinated by metalworking nonetheless. No idea why I commented this on your comment, it just made me think of my dream to buy a lathe 😋 and a CNC... And a mill... And.....
Thank you for not putting a bunch of music on this video!!!
CNC cutting machines have revolutionized the manufacturing industry, making it faster and easier to produce high-quality products with precision accuracy. From woodworking to metalworking, these machines are essential for any manufacturer looking to stay competitive in today's market.
Isso é o topo da perfeição!!! Parabéns, fiquei encantado!!!!
Unreal can’t no longer understand what’s happening. The cnc machines. As a former machine shop worker. Different planet. Ultra advanced tech .. wooow. Just can’t comprehend the complexity no longer …. Woow
Amazing machining 👊🏻
Machine only as Good as the Programmer,Well Done Sir 👍👍👍👍👏👏👏
Que coisa mais linda de ver. A tecnologia revolucionou a indústria, a robótica.
Esto es hermoso,lo que el ser humano a podido lograr
What an technology 👏 this machine is curving as like a Butter.👍👍
Begitu canggih dn sempurna CNC .
The Bost people sure make some awesome machine tools!
Я шлифовщик колленвалов.очень люблю "тяжелые"и "большие"валы.очень хотел бы шлифануть колленвал как на картинке в ролике.чтобы "шейка"вала была в рост человека и вес,вала несколько тон.самый тяжелый что я делал был около 300кг.и то один раз.мне 60лет,но мечта осталась до сих пор.
Ляпота то какая, красота!
How did you centre the end of the bar for the tailstock
C est vrais que lorsque le tour démarre on peut dire qu un vilebrequin ou de gros pignons vont apparaitre,mais la question que je me pose chaque fois que je vois ce genre de vidéos qu elles sont ces personnes qui ont mis au point avec une precision inouïe ce genre de machine , des gens à qui on doit un grand respect et qui restent toujours dans l ombre.
Impressive.
amazing!
Wouah!!! de l'art mécanique ...
Слава гениальному человеческому уму!
awesome tech
Как же классно работают станки с ЧПУ !
OIL TU ZE OR TU ZHEJ
Are there any mills or lathes that have two cutting tools working simultaneously?
Retired OEM machinery engineer here. With enough time and money we can build ANYTHING..
for those who followed the use of a vice with retractable belts in the warehouse of the City Hall of Gov. Valadares in 1961, this is something from "another world". . .
太高级了
Thank you 🙏 still amazing ☝️and hard work to reduce noise gaps ⚙️⚖️👏👏👏👍🎥👋☮️
Excellent, Thank you
Esuberante linda
Excellent work ❤❤❤
Nice video, thanks :)
Some of those are not machines! They are BUILDINGS! Damn they are huge.
Oh cool😁
Nước ngoài gởi thiệt làm máy công nghệ cao viết nam theo lại
I want to see more of that 18m lathe!
Check out the You-ji Huge cnc gantry style lathes.
Assalamualaikum.
Zeer interessant.
ok bud on end of the day state of art
keren mas brooo...👍
Very nice Engineering
Good technology
Удивительные машины и их производительность
Beut travail
I'm just curious, who knows for sure, what is an average lifespan of such cutting heads, or to put it slightly differently, how much volume of such hard allows they can process before they become completely inoperable and useless?
Amazing
Quantos empregos essa máquina retirou??
very nice
@10:22 its all good and dandy until the machine crashes. Ive ran Mazak's at Woodward GOV in Loves Park, IL during My summer break from law school. We would take a blank and turn them into fuel control units for GE and Rolls Royce jet engines. Awesome place to work and learn from. This company used to have classroom outside the main factory for students to learn how to use read blue prints to use micrometers and calipers to running machines before CNC's were invented like during WWII they had their own dentist doctor's office inside and all the men had to wear bow ties
I am a 30 year machinest, retired 12 yrs now and i still miss it.ds
Glad there's no music.
This might be how the ancient pre-dynastic Egyptians carved their granite, quartzite and dolerite interlocking stones and statues.
👌👌👌
I would sell a kidney for that millturn machine, but I don't think it would be enough.
I would sell my soul lol
I guess it would be safe to say you are not going to see these machines in your local garage machine shop.
Fafsfq
Люблю станки с ЧПУ. Нажал на зелёную кнопку и гуляй рванина.
Dali je to snimano u Pakistanu ili Indiji
I know the thumbnail is photoshopped but, what exactly is that dude supposed to be doing to the solid piece of steel with that tool he has?
Если в ближайшее время у нас не будет таких мет. Обр .станков нас ждёт печальное будущее .
Why no coolant? You would think they would use some to save on the cutting tool
Plus le diamètre est petit plus la vitesse de rotation est grande.
I'm working Al round waldar
Hi
Place please
أنا والله مهضوم خريج مصافي عدن اربع سنين درست خراطه
supertegnologia. asombroso
CD ROM?
I shaped a Lot of Gears in my career. I couldn't sell it if it had that bad a surface finish!
I agree Jim Gears Need To Be Cut On Gearcutting Machines !👍👍👍
@@stevencoyne4971
My last gear machine was a Fellows cnc shaper. Had about a 28" table. It cost us $480k used but it was only as good as the cutters I had to buy.
I had 5 old 1950's Fellows shapers that just kept running. They were built So much better than the Chinese crap that were cheaper in every way.
Time is money, so quality vanishes and obsolescence rules manufacturing.
@@GB-vn1tf
Their Motto to us was "Your Quality is Preferred as Long as Your Price is Cheapest."
I just put in 3.73 gears in my Z28. The manufacturer stated "A New 5-cut technology." The instructions said to Break them in. What??? Surface finish was bad, ~ 150rms! Obviously they were Skived. I've Never needed to do that before and I've done it 3 previous times.
sound volume doesnt fit.
sound to video doesnt fit.
and "turning is the common operation on a lathe" - thats what it is built for... so yeah i guess...
Обтачи всё лишнее и получится иголка! Много отходов
Боже мой---мы от них отстали не то что на сотни лет--мы отстали навсегда....
Tecnologia a anos luz from tito cardoso
It's as if you were watching a pottery factory.
Here I pause for a moment to seriously think about the matter of creating this much more complex mind than these machines
boleh ikut kerja apsen langsung dari Adi anak Jepara Guyangan randu
An ex-boss of mine is a supervisor in a shop with a 26-foot diameter VTL. Sure like to see it operating but his work is hush-hush so no dice. 😕
Индусы делают намного быстрее с помощью песка и костра
На багатьох кадрах неможна оцінити реальні розміри деталі і реальну швидкість її виготовлення.
Thientai ,
QC.ok
கலைஞர் கருணாநிதி 1969.....தமிழ் நாட்டில் இருந்து கலைஞர் கருணாநிதி. 1971.தமிழ் நாட்டில் இருந்து கொண்டு இப்படி தான் இருக்கும் என்று எதிர்பார்க்கப்படுகிறது. இதன் காரணமாக
Вам шабрить ничего не нужно? Я могу.
공구 날 관리좀 잘하라 공구 날이 무디어 칩에 불꽀이튀잔아 그데들도 엔지니어냐 냉각도 않하고 절삭 가공 하냐 바이트가 남아 나갰냐 쯔즈.....
Seems pretty useless milling a universal joint profile on a solid shaft! Not much “ universal” about that joint!
That is pretty f**ked up eh?
I couldn’t figure out why they were machining a universal joint that served no purpose either. Nothing against the machine. I just feel something else could’ve been done.
I think some of these videos are just promo’s to show the capabilities of the machine. The parts have no useful purpose.
Реклама морально устаревшего Мусора.... Сегодня производители стружки ни кому не нужны.... ГЫыыыыыыыыыыыыы)))))))))))
متي٠ياتي٠هذه٠اليوم٠وتصبح٠هذه٠الصناعه٠عندنا٠٠٠٠٠٠٠الف٠سنه
T
Это забота о слабых нашего
общества, они плохо ходят ногами и не умеют говорить.
Собственно, транспорт для инвалидов. Печально, что президентам приходиться разделять с ними авто. Все таки глава отдельно от инвалидов и малоимущих.
い
Vous nous emmerdez avec votre " satisfying " complètement débile qui ne veut rien dire
Great
вот че творят, ну вот нахрена он нужен этот кален вал