SUBWOOFER - How to run the positive POWER CABLE (Audio Amplifier) - AUDI A3 8P
HTML-код
- Опубликовано: 19 мар 2021
- 🖤Support me for ANTS IBIZA 2024 , CLICK ON THIS LINK:
--- / unx9s ---
!! The content of this video is purely illustrative and shows how the author did the work himself. The author therefore doesn't take any responsibility for any damage to people/things created by the public. Thanks. !!
Dom Works RUclips 
Авто/Мото
Fantastic video! I am so happy that you have the exact same car as I do! Thank you very much. I will do this with mine. Thanks again. Much appreciated!
I'm happy you have found the information you needed;
Don't forget to subscribe, so you'll be always updated 🙏🏼
Great video! Thank you so much. Before, I didn't see that rubber seal passing from engine compartment to the interior! You helped me so much! Thanks!!!
Finally someone with the same car as me
for your video, very helpful. Anyone wanting to tap into that buss bar but doesn't have an extra nut there to use; it's a m5 .8. (2008 fwd, 2.0t, auto) Edit: personally decided against using that buss bar. Couldn't quite figure out how many amps could go across that thing safely so decided just to fuse at the battery.
Really really good video ! Checked out this video and I subscribed right away. Thanks for explaining this good. Keep on updating more of these videos !
Nice, my friend !!!
Perfect Video. Helped me a lot!
Really like the tutorial bro, really good work with the angles and quick notes on screen, literally all the bits i would have wanted clarification on if i needed to know how to..
Great work bud. keep it up!! I liked and subscribed btw!
Thank you man, really appreciate it!!
Good job mate thanks ❤
Thank you very much
Thank you! Helped me a lot
You're welcome!!
Thx!
Awsome video dud, just did with my own A3 8PA today and thanks to your video, it was so easy ;) Just a one small thing, it was 8mm and not 10mm to remove the bolts for that tray under the steeringwheel ;)
Glad to hear it :)
super cool👍🏼👍🏼
Thank You!!
Great video, do you know what type of nut do i need for the fusebox distribution?
Master! Very Thnx for this video 🤝🤝🤝
Thats how mines done too but dont like it on the bussbar for the power cable id rather it be directly on the battery so gotta cut and rewire soon also on 8k rms 2 12s on 2/0
Hi, congratulations for the videos. You are really good. I ask since you have the same car as me if you have ever replaced the central flap motor v70. The diagnosis made with VCDS gives me the following error:
01272 - Positioning Motor for Central FLap (V70) - 003 - Mechanical Failure - Intermittent.
The problem is that I can't adjust the direction of the air, for example it never reaches the feet. Have you ever taken it apart? From what I was able to understand it is hidden in the central part starting to disassemble something on the driver's side. Can you help me?
It is enought space for a 50mm cable?
Yes!
Looks like so so much work. Not to boast but i've done it in 30 min, your looks like it took atleast 1-2 hours yet yours is safely hang on a side of the battery cover while mine is on top.
Yes 1 hour isn't so bad😬
How do u connect rca cables?
Great vid, can you do a vid of how to run the rest of the cables to the amp
Thank You.
The process is the same, I didn't filmed it because is very simple (so you don’t have to pass to the engine compartment).
Simply remove all plastics in cockpit area and install the cables. (BUT this time on the passengers side, in order to separate POWER cables and SIGNAL cables).
So from the radio you will run these cables: RCA, and 1 small wire to do the “Remote” signal from the radio, so the amplifier powers ON when you power ON the radio. In commerce there exists the RCA cable with also attached the “remote” wire. If you don’t find it, simply bring the RCA and 1 small wire, (1mmq is enough).
Let me know !
@@domworks thank you! Ill let you know
@@startklar2593 do you have a wiring diagram of what cable is what on the mmi unit? I need to run "speaker high" cables to my amp
Hey Dom,
Is the hole located at the same side (left) for Right Hand Drive cars, or will the hole be located on the drivers side (right)?
Hello Ayush,
in the right hand drive cars i suppose it's all "mirrored", so the hole will be on the driver car, almost surely.
@@domworks thanks Dom, I suppose that’d make the most sense.
However, the battery is on the right hand side still for my car, do you think there would still be a hole at the same place you showed on the video?
Of course I’ll be checking but just want a sort of confidence before taking things apart.
Cheers again Dom!
Do you mean your battery is placed in the same place as on my car ?
@@domworks yes it’s on the same side as yours
Will this fix the problem that I'm having? I put an aftermarket android stereo, but I have no sound. The stereo does emmit it but not when plugged into the car. The original stereo still sends it no problem
You have to buy first a converter. These work through a non-standard protocol so you first have to convert the signali. Buy a PHONOCAR 4/130 (if you have bose system) or PHONOCAR 4/190 if you have a standard audio system. Let me know👍🏼
Surprised the airbags didn't set off.. good to know there's a way in the cabin though
also... my a3 is right hand drive so I'm not sure how much this applies 🤔
What do you mean about the airbags?
@@numbersletters1442 In the engine compartment, where is the battery set? On the driver or passenger side?
@@domworks all the pulling and poking around seems like it would set off an airbag
@@domworks it’s on the passenger side
Where do u ground the amplifair ??
On any metal surface you want in the trunk (so it's the easiest way). For example I mounted it on one of the four hooks that are in the corners. (But first remove the black paint for 1cm so you can get a clean metal to metal contact).
@@domworks grazie mille
@@domworks im strugling eith rca cable ,i connected to the front speakers which are the brown square ,there is no sound can i give me an advice where u connected your ones, and remote wire ?
@@RAMANOFFICIAL1 Do you have RCA out on the radio ?
@@domworksno im installing in stock concert radio so im using rca convertor ,i will use front speakers, but there is no sound 😥
lol if you cut any off your wires as your pushing that in next too all main wires you will know about it later when put battery in there much better things too use