Sorry for the late publishing. Between the Covid and an International relocation, I was not able to publish any video, I will be able to resume video in the coming weeks. Thank you to my subscribers.
Great job... what did you do with the windows ? Just glue the clear parts at the begining , then apply putyy, and after the sanding, painting etc, you applied the decals ?
Yes I normally fill the windows and apply decals for cockpit and passenger windows. I mainly do this with Revell kit, as they don't provide a nice cockpit. I do the cockpit and passenger window sometimes on the Zvezda model.
Salut j’aimerais me lancer dans la maquette d’avion mais je ne sais pas comment commencer pour pas trops chère ! J’ai vu que tu utilise pas mal d’outil différent, du coup je voulais savoir si y’avait des alternatives avec un bon résultat pour commencer ? Ps: je suis jaloux ton avion est trops beau 😅
Salut, pas de soucis. Pour le début, il te faudra une maquette, du mastique ou putty, de la colle a maquette, du papier de verre 600 et 800, et bien sur de la peinture avec des pinceau. Le mastique sert a fermer les port et obtenir une surface lisse. Le plus difficile sera la peinture avec le pinceau, car cela demande des qualité que je n'ai pas, j'utilise un Aérographe avec un compresseur, mais cela demande un gros investissement environ 500 Euros, donc dans un premier temps utilise un pinceau. certain arrive a de bon résultats quand meme. J'espère que cela répond à tes attentes. Tiens moi au courant de la suite ;-)
@@airlinersmodelmania merci d'avoir pris le temps de me répondre 😄. Du coup j'ai commander un model set level 3 pour commencer. Comme ca il y a tout dedans et à côté j'ai pris du mastic ! J'espère réussir à le faire 😅
It depends on your location, but it will be most probably cheaper to build them yourself i.e. a model will cost between 20 to 30 USD on eBay, for the standard A320,A321 to 777 787, some more specific plane can be more expensive up to 50 USD. I hope this help
I will build a 787 from Hainan, with the KungFu Panda livery in the future. Now if you refer to Singapore Airlines they have the 787-1000, for this I will have to do a special mod. I will think about it, but cannot promise.
Once again your video was poorly produced. I have asked you before to please balance the volume of your videos! The difference between your spoken words and the your music, is far too much. Thus the viewer is forced to adjust the volume while trying to listen to your demonstration build. I hope you will remedy this soon!
Sorry for the late publishing. Between the Covid and an International relocation, I was not able to publish any video, I will be able to resume video in the coming weeks. Thank you to my subscribers.
I left about a year ago, back in Europe now ;-)
Yeah, 1000 Subscribers🎊 congratulations👌 you deserved them so much
Thank you very much, this is very kind of you. Thank you to all my subscriber, they are the one to thanks and congratulates to follow me.
Thank you
@@airlinersmodelmania hello, good job, the up and lower wing, paint whit light Gray or White? Thanks
@@liberaitalia236 The entire plane is white. I had to check a few photos to be sure
Good to see you publishing again, I hope to see more of your video soon
Awesome and clean job!👏👏
Yay your publishing again lucky that I love this channel
Thx Buddy
Great job... what did you do with the windows ? Just glue the clear parts at the begining , then apply putyy, and after the sanding, painting etc, you
applied the decals ?
Yes I normally fill the windows and apply decals for cockpit and passenger windows. I mainly do this with Revell kit, as they don't provide a nice cockpit. I do the cockpit and passenger window sometimes on the Zvezda model.
What shade of blue did you use for the tail??? Looked like a Tamiya color.....
I used a Tamya blue, if I remember correctly it is
X-4 color.
The wings are grey or white ??
The wings are white like the rest of the fuselage
Salut j’aimerais me lancer dans la maquette d’avion mais je ne sais pas comment commencer pour pas trops chère ! J’ai vu que tu utilise pas mal d’outil différent, du coup je voulais savoir si y’avait des alternatives avec un bon résultat pour commencer ?
Ps: je suis jaloux ton avion est trops beau 😅
Salut, pas de soucis. Pour le début, il te faudra une maquette, du mastique ou putty, de la colle a maquette, du papier de verre 600 et 800, et bien sur de la peinture avec des pinceau. Le mastique sert a fermer les port et obtenir une surface lisse. Le plus difficile sera la peinture avec le pinceau, car cela demande des qualité que je n'ai pas, j'utilise un Aérographe avec un compresseur, mais cela demande un gros investissement environ 500 Euros, donc dans un premier temps utilise un pinceau. certain arrive a de bon résultats quand meme.
J'espère que cela répond à tes attentes. Tiens moi au courant de la suite ;-)
@@airlinersmodelmania merci d'avoir pris le temps de me répondre 😄. Du coup j'ai commander un model set level 3 pour commencer. Comme ca il y a tout dedans et à côté j'ai pris du mastic ! J'espère réussir à le faire 😅
Super tiens moi au courant si tu as besoin d'aide ;-)
@@airlinersmodelmania ça marche merci 😄
Are these sets expensive because I’m wanting to switch to building my planes instead of buying the model need some advice
It depends on your location, but it will be most probably cheaper to build them yourself
i.e. a model will cost between 20 to 30 USD on eBay, for the standard A320,A321 to 777 787, some more specific plane can be more expensive up to 50 USD. I hope this help
World Explorer ok thank you
what color did you use inside the engine ?
Hi I used the same mix as the Cathay light blue. It is a mix of Tamya white, and blue
World Explorer thanks 👍🏻
Try the b787-9 singapore airlines zvezds
I will build a 787 from Hainan, with the KungFu Panda livery in the future. Now if you refer to Singapore Airlines they have the 787-1000, for this I will have to do a special mod. I will think about it, but cannot promise.
75th liker here.
Thank you enjoy the next video. Will be released today. Tu 104 CSA from Amodel ;-) thank you for watching
Unfortunately, the audio volume in your videos remains too low. I have asked previously for you to make the volume more normal. Please do so....
Thank you for the feedback, I will try on the model video. Keep asking if not good enough. THX
I think it sounds fine
Once again your video was poorly produced. I have asked you before to please balance the volume of your videos! The difference between your spoken words and the your music, is far too much. Thus the viewer is forced to adjust the volume while trying to listen to your demonstration build. I hope you will remedy this soon!