1965 Chevy C10 mounted to a 06 Trailblazer SS chassis and power train.
HTML-код
- Опубликовано: 31 июл 2024
- In this video I'm working on getting some of the parts all in place to see if I can get this 65 c10 to fire up using all the trailblazer ss electronics. Up to this point I have not done any of the work on this truck but the quality and fit of the parts are great, so koodos to who ever did the work till this point.
00:00 The walk around of the 65 c10
02:48 Starting to fit brakes and steering
05:14 Mocking up the front clip of the c10
07:58 Installing the fuel tank
08:32 Figuring out the wiring. 
Авто/Мото
Nice looking pickup and your going to make it a Nice Looking Kickass Pickup! Kool! Thanks for sharing!😎
Puzzle? With what you had to start off with would have made lesser men cry! From your videos I’ve been watching, there isn’t much you can’t figure out! Can’t wait to see it finished.
Nice project Brent
Brent, that’s going to be one cool old new truck! That’s my kind of ride...
Saweeeeeeet!! Nice conversion. I know you will get it figured out Brent!! Staying tuned in...
He brought the truck to the right place!! Give er hell Brent!!!
Old trucks have character. Swapping the chassis to save the truck's appearance as a restomod was a great idea.
Oh Joy... You are having fun
6:15 that door sounds terrific.
You are a man of great talent love your work this is going to turn out really nice 👌
Nice...Can't wait for your next video..thanks
Love that truck
Well THAT looks like fun! Boredom won't be a problem on that project. No "Same old, same old" complaints will be entertained, but you will be. Vastly. The security systems can be tricky. Take a can opener with you on your test drive, in case it shuts off the engine and locks you inside.
Super cool ride!
great build for your garage
I like the old trucks. I like some new trucks. This one is right in the middle. Looks like it will be a cool reliable driver. We definitely need to see it completed.
THAT is SOOO KEWL!!!! great job.
Very nice truck shes going to be a sweet ride can't wait for the next video
Looks like fun!!
Another awesome build Brent!
Love your work and always such a great positive attitude to boot! Thanks for sharing!
Thanks for watching!
@@HalfassKustomshow are u gonna run the ac? The new harness do u splice it to the vintage air kit ?
Wow you are amazing old school and knowledge of new technology great combo love your channel
So called old guys created your cell phone and computer so rethink that, would you??
I love this channel so much that I hit the like button before the video even plays.
Great work :)
Lot of respect for you Brent! Definitely have some good talents.
Very cool truck... going to be sweet
Man and his dog priceless!!
That's going to make a sweet ride 👍👍🇨🇱
This is a build I always fantasized about doing with like a 1970 C10
Awesome job you are the man! Can't wait for the next video!
Nice truck I had a 65 once it was a 6 banger brings back old memories.
Good start there at least it fired up with a fuel added Brent
That is gonna be bad ass when it is completed
This will be a awesome build .
Great combination, 06 ss and the 65 Chevy. I have a 64 short stepside, still looking for the donor.
You are truly amazing!! I wish I lived in Canada near you just to watch you perform the miracles that you do. Now that I am old, I suck at that! LOL Cheers.
That's a big big job to figure out that wiring.
It's not to bad stuff has been labeled well that I can see.
Just want to say you are a big inspiration. You get more work done in 1 day than I get done in a month. But of course working 50 hours a week doesn't help
Man thats cool. I just hope your boy makes the right choice and puts some clean wide whites and some cool hubcaps.
Those poor TBSS always getting stripped for projects. I got 5 trailblazers(big fan of the 4200). At least this TBSS ends up in something cool !!
hi very cool truck
You & the guys you know have some BAD ASS RIDES ! TBSS always wanted one
Its got potential especially because you're finishing it up! I've had a few of these trucks and I like the style of them!
I can only imagine the relief when the wiring started to click and start closer to finished and run. The bling will be the easy stuff for this fine ride. Does it make you think that the next job, be it a bike or a custom ride, that all inside intrinsic hard done, to absolutely paint one to the max!! It would be fun to watch from our prospective> ??
Thanks for sharing!😎
That’s gonna be a sweet ass ride
it's always a good feeling when your the one to get someone's else problems and headache to figure out, until your the with the headache
Your a brave man , taken on some one else’s Frankenstein, great work
Reminds me of a truck my dad had in the early 70s. Same color blue maybe a year or 2 different. Dads wasnt quite that nice though. Previous owner was a one armed lumberjack.
I am but a pretty truck I can't wait to see it come together God bless
Pretty cool project different
Looks like you made sense of it pretty quick .I would think you must be in the trade professionally . Nice truck.
very cool ,I want one
That's gonna be a nice truck when completed. I've been seeing a lot of people doing this with different trucks.
Nice truck. A little overwhelming with all those strands of wires
haha yeah it can be. I just keep weeding out the ones I don't need till it work haha
Man that don’t look like a easy job.😱🛠🇺🇸
Looks like they got to a point that they couldn't figure out and this is where you came in
At 2:00 I'm going to bring you a box of wires and an engine sitting on a chassis, and see if you can get that running for me by the weekend; please.
"Yeah, eh... no prob... we'll get'er sorted out..."
That's the end of that clock spring!!
haha that never occurred to me till you commented and may answer why them buttons don't work haha, oh well live and learn.
That thing is pretty damn cool! /w\METAL/w\
new to channel, want to say thanks.
I see that the passenger ( was a bystander earlier in this vid) appears to be very very healthy.
Trying not to be insulting, but no need to check for worms, - at all.
Great videos! Keep it up the great work guys! Just subscribed! Documenting a few old C10 builds myself on here! Even a panel!!
Clue us in how the dash cluster was installed and the navigation panel. Also, too, the steering column mounting.
Looks like fabrication was made for cluster and nav screen. thanks.
I'll go though it on the next vid as I have to dive back into the dash again and change some stuff over.
@@HalfassKustoms Thanks
Make sure you check out what mounts the rear end to the frame the four link part of it you might want to box it in I've seen Trail Blazers have a lot of issues there and they really love to wear out the upper a arm bushings on the inside by the frame especially if he's going to end up doing power adders
You should pop the hood of an 06 Trailblazer and get familiar, then goto town on that C10 style.
That truck is going to be one little cool little sumbitch.
Got that thing figured out pretty fast, I'd still be digging through wires 😂
Cool truck. I’ve got a 66. It’s a tad more old schooler tho.
haha yeah this ones a little high tech.
That is sick! like in a good sickness kind of way!.
Motionautotv had a good start to a similar build, but seems like they'd rather play around with civics instead of rusty junk. Doesn't make sense to me but to each their own.
then chooch said there's your supper.
You know you're getting old (aka me)... My first reaction was that those front tires are too wide and how is anyone going to turn that steering wheel? Oh yeah, it's on a different chassis with power steering dummy! Another winning project Brent!😆😆
you do great work, it's a shame the guy butchered it with the trailblazer parts. those trucks are gorgeous with stock interior. upgrade motor, nice wheels and that's all you need for those trucks. i guess each to their own
yeah was the previous owner to this fellow but it's all setup for this stuff so we may as well roll with it haha
How well does the old pickup fit that chassis? Did they lengthen or shorten it? That looks like a swap I would do.
was just looking tonight and it looks like 2" was added
If you can’t unlock the cpu Vitally auto outside Steinbach might be able to help. He was able to get one of mine unlocked.
Brent....I like it, how much work do you think it took to get that cab/box on the chassis....do like the paint scheme...be a nice truck when completed..
Dont look to bad. from what I can tell it has had 2 inches added to the frame. other than that it don't look to bad. I'll go into more depth next vid about how it's mounted.
Do you know if they moved any frame/ body mounts
Can I ask you what exactly u left on the body wring harness to make it work? I’m doing the same project and I got the body wiring harness, but there is a lot of extra stuff on the harness and honestly I don’t know what I need to make it work. I was toying with the idea of hooking up the steering wheel harness and the dash cluster and stuffing the rest under the dash but honestly I don’t need all that other stuff. Is it as simple as identifying the plugs for whatever I need to keep and trace them back to the fuse box and eliminating the rest or are there other things I need to keep? Sorry for all the questions but really don’t know who else to turn to find guidance. Thank you for your help, I really appreciate any replies you might have.
Fun project Brent. Hey, I’ve noticed green pixelation on your last two vids... Is it just me or are others noticing too??
Those anti theft systems blocks the fuel and the ignition systems, so it's turns into a headache when you make a swap like this one. With a little bit off patience you can solve the problem, the worst part it's done.
Wish I could take you my truck
Hey Brent , looks like a beauty . Would a 2001 Blazer work to mount a '47 to '54 chevy pickup cab ...or would the s-10 pickup be the way to go . Just happy to mount a cab and front sheetmetal and use original drivetrain . Something for a older person to scoot around in that looks old and has a lot more room than a '30 Model A pickup cab on the inside . More comfortable seat and a chance to move inside when the knees and hips start to go ouch .
Would work but would be really short
I wish I knew how to hack together cars
Brent that Hemi is looking lonely ha ha
Is that the floor and firewall from the trailblazer SS?
nope all stock 65
Halfass Kustoms they did a good job then
Somebody did a ton of work on this before you got it. Any idea why this work you're doing wasn't done by them?
The paint job on the pickup looks like stock....I'm not good with today's computer controlled cars. I never kept up. But I know, you'll get it up and running in no time.
I just don’t understand how you do it. That’s a 3 month head scratcher in the driveway for most people. You judges throw it together and oh my look at everything work! Yeah it didn’t start, but I’m guessing you’ll have that figured out before the sun sets.
haha took a little bit but I did figure it out haha
Halfass Kustoms of course it did!! Well you’re obviously a master with your hands and you’re clearly very intelligent. I guess that’s what makes your videos so good to watch.
Why I keep things morless stock
Like me a resto mod
You just broke the clock spring in the steering wheel for the airbag
haha just figured that out. have to pull one out of a parts unit lessen learned.
Did you go to school to learn how to do the electronic on the LS engines?
Do you follow grenade motorsports?
Yeah seen some of his videos before.
So in ten years it will not only have a worn out powertrain
It will have the WRONG wornout powertrain.
STOP BUTCHERING OUR HERITAGE