How much height adjustment is possible with these? I don’t plan to do any non tarmac racing with mine, so I’m concerned that I wouldn’t be able to get the car low enough to where I want it
Also what did you torque the new upper bolts on the bottom of the suspension to? To the factory Subaru specs which were for the OEM 19mm bolt (at least on mine, I’m on a GD but I think we have similar suspension)? I didn’t see anything from Reiger about this, no install instructions only rebound setting recommendations came with the paperwork
How did you install the fronts? The longer travel makes them too long, if I connect it to the knuckle, then I can’t get the knuckle high enough/Lower Control arm low enough to get the ball joint in its hole. I tried jacking up the knuckle and standing on the LCA but it’s still not enough
If you have fresh OE rubber bushings on the control arms it may be hard to get the control arm low enough to bolt it. You could try loosening the control arm bolts to allow it to mount first, and then re-tighten. Sorry for the late response.
I was running DMS 50mm coilovers. They were great but DMS closed the doors when the owner passed away. I sold the set to a friend who is still using them.
oops I'm from Brazil, I'm a fan of cars, here in Brazil there isn't much video teaching about it, it would be great if you could put subtitles in Portuguese, it could even increase your views.
Congrats on the upgrade! Can you show us what you decide to do for the covers in a future video? Thanks!
Absolutely. I’ll get them made up and post a video.
How much height adjustment is possible with these? I don’t plan to do any non tarmac racing with mine, so I’m concerned that I wouldn’t be able to get the car low enough to where I want it
Also what did you torque the new upper bolts on the bottom of the suspension to? To the factory Subaru specs which were for the OEM 19mm bolt (at least on mine, I’m on a GD but I think we have similar suspension)? I didn’t see anything from Reiger about this, no install instructions only rebound setting recommendations came with the paperwork
Got dang!
How did you install the fronts? The longer travel makes them too long, if I connect it to the knuckle, then I can’t get the knuckle high enough/Lower Control arm low enough to get the ball joint in its hole. I tried jacking up the knuckle and standing on the LCA but it’s still not enough
If you have fresh OE rubber bushings on the control arms it may be hard to get the control arm low enough to bolt it. You could try loosening the control arm bolts to allow it to mount first, and then re-tighten. Sorry for the late response.
I'm jealous, I know these are about as good as it gets for rally. What were you running before?
I was running DMS 50mm coilovers. They were great but DMS closed the doors when the owner passed away. I sold the set to a friend who is still using them.
Woow! Reigers! How much per full set? ~6k $?
They start from $7k to $20k plus depending on how they are optioned.
oops I'm from Brazil, I'm a fan of cars, here in Brazil there isn't much video teaching about it, it would be great if you could put subtitles in Portuguese, it could even increase your views.
Is there no option to have subtitles on the video?
@@bankruptmotorsports the translation is not the best
Whats the price on these ?
It depends on how you option them. Starting about $7k