i am starting this print and was wondering if there is a file i am missing for the little spacers that hold them in place to glue them together i cant seem to find them. thanks again for the model awesome job!
I'm so excited to print this out! I'm so glad you have this video up explaining everything because it will make it so much easier for me! I know it will look fantastic with my Link cosplay.
+Mighty Jabba's Collection Thank you! And yeah, she's amazing. I'm still hoping to get her in one of the videos eventually. But I thank her all the time because I wouldn't be able to make these look even close to this good. So I owe a lot to her. :)
I cant deny that i wasn't a bit disappointed this week :) When you did the quick tease the other week, all I seen was the "W" shape cross guard. Since I've been on a Dawn of Justice/DC work up, I thought you were doing Wonder Woman's sword! It does look awesome though and expert assembly/painting by your wife (two thumbs up to her!). I think it's time for some shelves in your computer room. I know Thor's Hammer been a bit lonely but not it has a sword to talk to at night. Thanks once again for your hard work!
+neckbreaker Oh lol, yeah I've thought about doing some Batman v Superman stuff. I really want to do the Kryptonite Spear but there's no good references images out for it yet. So I'll definitely do that in the future. And I agree about the shelves. There's too much stuff to do and not enough money or time lol. I think I might actually be moving to a new area of my house and trying to build a sort of studio that's optimized for filming my videos. And there I will definitely have some nice shelves to showcase my stuff. :)
Printing this now on .1 fine layer and 30% fill. It's looking beautiful. I am printing each piece one after the other from the foible toward the pommel.
I found this on thingiverse, but my printer is only 6x6x6 inches, would the sword still be holdable if the parts were scaled down to be 6 inches tall (and equal scaling for handle pieces)?
Thank you for this great video! And respect to your wife for the paint job. I will try this as soon as my printer arrives, this is a must have. You're a great guy. I will subscribe, and watch more.
I reccomend Zap A Gap glue and use the accelerator, it dries near instantly, one catch is it is CA glue so you nay get white spots, but since you paint you models it should not be a problem, also props to your wife for doing an awesome paint job.
+Atomic 3D That looks interesting. I'll definitely have to look into that. Thanks for the recommendation! And I'll pass the nice comment along to her. :)
Hello man! i'm trying to make a master sword tutorial using some gray cardboard (i think this only exists here on brazil) And it would be awesome if i could use your 3d file to create layers (in 123D make) to cut out of cardboard, so, if you could send me the full sword 3d file i could give credit to you and your channel, what do you think?
Hey bud. love the sword. your description still says "Coming Soon" for the fusion files (almost 2 years later) is it possible to get those? I'd love to print this on my CR-10 in much fewer pieces.
I downloaded Mattercontrol and i have an JGAurora A5 and it's not listed in the add printer? Is there another printer I can use with this program? I am trying to print the zelda sword.
Hello! I am printing one currently, and am trying to get supplies to finish it, but I can't find the spray paint you used, do you or someone else have a link? I really appreciate it, thanks!!
What are the dimensions of the final product? Just the length of the whole thing would work for me, from there I could find the rest of the dimensions.
id love to make this on my 3d printer but i have a small bed so some things are way to big for my printer haha do you have a file of it where its a 120x120x120?
That's were I went wrong! I didn't let the gorilla glue cure properly! I rather stupidly broke my master sword at one of the joins, I have fixed it though but I think I'll go over it again using a plastic glue I have made by UHU to fill in what gaps there are (once the gorilla glue has fully cured). How easy is it to print in pla? I have a da vinci AIO and not printed in pla yet.
Great work Chaos! Just finished printing your R2 project and plan to paint that guy soon. Looks like a have another one to make as well. Thanks for sharing your work too.
I love this though i wont lie my irresponsible side was hoping you would see how much damage that could do to a tree or box lol I was just curious what do you do with your prints I imagine you have by now more then a shelf worth lol
+TheAppStop Lol yeah, that would be fun, but I imagine the outcome would be me smacking something and it falling apart lol. And as for my prints, I mostly put them on display either behind me (like Mjolnir, the Plasma Pistol and R2D2) or in the little slots in my desk (like Citron). I'm eventually going to get some sort of shelving to put them on so it looks better. Not sure what I'm going to do with this sword though lol. It's pretty big.
Pretty sweet, can you make one of the waepons from Fallout series? Like the alien blaster or one of the other weapons? BTW keep up the goos work. I finally got a video up using my new printer, i just have to tweak the settings since i finished building it about a week ago,
+Daniel Bustos (makinon127) Well it depends a lot on which filament you choose to print and things like that. But for this one specifically, I printed it out of Hatchbox PLA filament. So not taking into account for labor costs or anything like that, just for raw materials (filament, paint and glue), I'd say it was close to $30 for both this and the sheath.
Hey bro, I'm currently working on making props for my cousins halloween costume. I'm using a cnc to make the shield and so far the full size files sword files i have been using are not that detailed. I really like the size of your model. Would it be possible to share the assembled fusion file with me? ill make sure to give you credit when i post on Instagram.. @ebonyandbirch
Hey! Think you could make a Hylian Sheild with a handle. Also can you put an handle on the Sheath so it can be on your back. Thanks!
Super tight. My kid is gonna print this soon and i will have him watch your video. Thank you for your hard work, both of you.
Dude! your .stl files are amazing they are so perfectly well put together great job. Youve made once again another LOZ fan happy :D
Legend of Zelda is my favourite video game series in fact my favourite over all video game very awesome design
i am starting this print and was wondering if there is a file i am missing for the little spacers that hold them in place to glue them together i cant seem to find them. thanks again for the model awesome job!
You and your wife are amazing. I love your videos.
+AKARDUINO 123 Thank you very much! That means a lot to me. I'll pass on the nice comment to my wife. :)
I'm so excited to print this out! I'm so glad you have this video up explaining everything because it will make it so much easier for me! I know it will look fantastic with my Link cosplay.
+Meowdolf Awesome! I'm glad I can help! Let me know how it goes for you, and if I can provide any extra help. :)
My last pieces will finish in a couple hours. Wish I could like this multiple times. Damn nice model. Can't wait to finish it.
Fantastic job! You're lucky you have such a talented and understanding wife. :)
+Mighty Jabba's Collection Thank you! And yeah, she's amazing. I'm still hoping to get her in one of the videos eventually. But I thank her all the time because I wouldn't be able to make these look even close to this good. So I owe a lot to her. :)
I cant deny that i wasn't a bit disappointed this week :) When you did the quick tease the other week, all I seen was the "W" shape cross guard. Since I've been on a Dawn of Justice/DC work up, I thought you were doing Wonder Woman's sword! It does look awesome though and expert assembly/painting by your wife (two thumbs up to her!).
I think it's time for some shelves in your computer room. I know Thor's Hammer been a bit lonely but not it has a sword to talk to at night. Thanks once again for your hard work!
+neckbreaker Oh lol, yeah I've thought about doing some Batman v Superman stuff. I really want to do the Kryptonite Spear but there's no good references images out for it yet. So I'll definitely do that in the future.
And I agree about the shelves. There's too much stuff to do and not enough money or time lol. I think I might actually be moving to a new area of my house and trying to build a sort of studio that's optimized for filming my videos. And there I will definitely have some nice shelves to showcase my stuff. :)
3d printing can be costly depending on the filament use, labor, print time, etc.
Great job Garrett! You and Chelsey did a great job on this!
+superdeluxe54 Thank you! I'll pass the nice comment along to her as well. :)
is there a reason the blade is different sizes? just makin sure
Printing this now on .1 fine layer and 30% fill. It's looking beautiful. I am printing each piece one after the other from the foible toward the pommel.
I found this on thingiverse, but my printer is only 6x6x6 inches, would the sword still be holdable if the parts were scaled down to be 6 inches tall (and equal scaling for handle pieces)?
Great job! Excellent 3D model. Thank you. Keep up the good work.
Your blade is huge but awesome you did inspire me to make my own master sword.
hello, i bought MASTER SWORD (FULL SIZE) - LEGEND OF ZELDA but it doesnt have the pins to assemble.. where can i find the pins stl file? 3dcults
thank you for this model and video, I am still new to processing the prints after they leave my printer, this was very helpful, again, thank you!
Your .stl files are damn perfect. I can't wait to finish printing this!
Thank you for this great video! And respect to your wife for the paint job. I will try this as soon as my printer arrives, this is a must have. You're a great guy.
I will subscribe, and watch more.
You're welcome! I'll pass along the nice comment to my wife. :) And good luck printing! Let me know how it goes.
Very cool, I started printing my and came across your video
Am i supposed to sand the handle, pommel and the guard, or just the blade itself? The question also applies to applying primer
I reccomend Zap A Gap glue and use the accelerator, it dries near instantly, one catch is it is CA glue so you nay get white spots, but since you paint you models it should not be a problem, also props to your wife for doing an awesome paint job.
+Atomic 3D That looks interesting. I'll definitely have to look into that. Thanks for the recommendation! And I'll pass the nice comment along to her. :)
Hello man! i'm trying to make a master sword tutorial using some gray cardboard (i think this only exists here on brazil) And it would be awesome if i could use your 3d file to create layers (in 123D make) to cut out of cardboard, so, if you could send me the full sword 3d file i could give credit to you and your channel, what do you think?
Hi, did he send you the file? I'm also needing it in one piece
I am so jealous!
In the files it looks like a bunch of parts for the blade, did you use all the parts to make the blade???
Hey bud. love the sword. your description still says "Coming Soon" for the fusion files (almost 2 years later) is it possible to get those? I'd love to print this on my CR-10 in much fewer pieces.
I downloaded Mattercontrol and i have an JGAurora A5 and it's not listed in the add printer? Is there another printer I can use with this program? I am trying to print the zelda sword.
IT'S THE MASTER SWORD!! I WANT IT!!!
Are you going to upload the Making of video of this? Thanks for the great vids!
Hello! I am printing one currently, and am trying to get supplies to finish it, but I can't find the spray paint you used, do you or someone else have a link? I really appreciate it, thanks!!
looks awesome! about to start printing mine ;D
leave a link no pun intended
Did your wife get rid of all of the layer lines on the whole blade?? I am currently making one and was wondering
Thanks for making this!!! I printed it at 50%. It looks great, I just need to figure out how to stick it together. Sheath is next.
The sword not need supports in the printing?
Great job you and your wife :3
Thank you! I'll pass along the nice comment. :)
What are the dimensions of the final product? Just the length of the whole thing would work for me, from there I could find the rest of the dimensions.
Can you make demises sword from skyward sword and put a link of the files in the description
Can you post the colors your wife used for sword/scabbard? And brands?
This is just amazing.
id love to make this on my 3d printer but i have a small bed so some things are way to big for my printer haha do you have a file of it where its a 120x120x120?
but then what is the size, i wanna make one from wood but idk the proportions
That's were I went wrong! I didn't let the gorilla glue cure properly! I rather stupidly broke my master sword at one of the joins, I have fixed it though but I think I'll go over it again using a plastic glue I have made by UHU to fill in what gaps there are (once the gorilla glue has fully cured).
How easy is it to print in pla? I have a da vinci AIO and not printed in pla yet.
How tubs of filler putty did you use?
do you have it full size?
Where are the STL for the pins D:!
Can you sell one of these all painted and finished? If so how much?
Nice I would like it
How long it it?
Great work Chaos! Just finished printing your R2 project and plan to paint that guy soon. Looks like a have another one to make as well. Thanks for sharing your work too.
+fishj92 Thank you! Awesome! I'm glad you're liking my stuff. :) And no problem. Let me know if you have any requests!
Looks great! How much does the finished sword weigh?
I love this though i wont lie my irresponsible side was hoping you would see how much damage that could do to a tree or box lol I was just curious what do you do with your prints I imagine you have by now more then a shelf worth lol
+TheAppStop Lol yeah, that would be fun, but I imagine the outcome would be me smacking something and it falling apart lol. And as for my prints, I mostly put them on display either behind me (like Mjolnir, the Plasma Pistol and R2D2) or in the little slots in my desk (like Citron). I'm eventually going to get some sort of shelving to put them on so it looks better. Not sure what I'm going to do with this sword though lol. It's pretty big.
Pretty sweet, can you make one of the waepons from Fallout series? Like the alien blaster or one of the other weapons? BTW keep up the goos work. I finally got a video up using my new printer, i just have to tweak the settings since i finished building it about a week ago,
+Atomic 3D Yes, I certainly can make something from Fallout 4. I'll add it to my list. And nice video. I'll be looking forward to more. :)
I'm concerned that my da vinci won't print this in any decent quality even with simplfy3D.
That's amazing! :D
how much could it cost?
+Daniel Bustos (makinon127) Well it depends a lot on which filament you choose to print and things like that. But for this one specifically, I printed it out of Hatchbox PLA filament. So not taking into account for labor costs or anything like that, just for raw materials (filament, paint and glue), I'd say it was close to $30 for both this and the sheath.
+Chaos Core Tech ok thanks you very much
But the handle is suppose to be blue 😓
In some games its a blue-ish purple
You look like Sam which is act in Game Of Thrones Dude ahahaha
Yeah lol that's not the first time I've heard that actually. :)
Lol,For seven god ı subscribe your channel :)
mahir özkürt he has broken his vows lol
ohaaa laaan
can I buy the sword and sheath from you???? !!!!!! I will gibe u 300 dollars for it I swear!!!!
I want it so badly but I don’t have a 3D printer 😭
Fuckin amazing!
It's too bad you messed up the wings on the mode. The ripples don't go to the end of the handle like that
Hey bro, I'm currently working on making props for my cousins halloween costume. I'm using a cnc to make the shield and so far the full size files sword files i have been using are not that detailed. I really like the size of your model. Would it be possible to share the assembled fusion file with me? ill make sure to give you credit when i post on Instagram.. @ebonyandbirch
This is really cool!
But I can't give it a "like" because you just stole the "Comedy Central" logo and added a "t"...