@@memes1to823 Please verify that you have closed all conflicting apps. It could be XPG Prime or Armoury Crate, check task manager as well for Lightingservice.exe or Lightingkeeper.exe
Nice build. I gave my old Lian Li O11D to my nephew, replaced it with NZXT H9 Flow, I was going to go for the Vision but got a good deal on the NZXT, both cases are amazing. I would have used same fans throughout. He mixed it up with Lian Li and Corsair fans. He has plenty of space to mount the GPU vertically, So many ARGB controllers!
@@SpongeBob-xh8ir Bro has never heard of reversible fan blades. The fans at the bottom are thermaltake swafans and the blades pop out and are reversible, they are pulling air into the case
Oh now you partner with Lian Li after I just built a full Phanteks system. Love the program, though, I need to get a different ARGB controller, the built in one in the Phanteks NV7 once it is connected to the mother board doesn't separate the different fan sections. So question with Signal RGB do you need to have multiple controllers to split the fans and AiO into separate zones?
when will you update to fully support the lian li controller i can not even use mine it keeps telling me limited frame rate and i am paying for pro version
As mentioned in this video. We are guiding Lian Li on how to improve their controller firmware so that it can better support SignalRGB. The limitation is on their side. There is no ETA yet but stayed tuned over the next few months. It is not related to Pro at all, we actually don't lock any RGB control behind the pro subscription.
If I do intake from the bottom and back of the case and exhaust from the side mount with the radiator will I mess up my AIO cooling? I have 2 intake at the back and 3 at the bottom and my AIO radiator is mounted to the side with 6 fans. At the moment I get around 60 degrees when idea and around 65 to 70 when gaming. With a 7800x3d
For me I use arctic fans with the Razer argb controller, But there's one issue that I need help with the RGB lags and isn't smooth I don't know how to discribe it Bette but if I plug them into the Mainboard they work fine and the lights don'ts stutter if I use a wave effect Please help me
i've been using signal for at least 4 months now and this is sick even if it do not work on my keyboard and my mouse cause they're (msi). What is that keyboard?
Hey man, this is an amazing video! Can i ask if SignalRGB works with Lian Li's strimers? I was trying to wrap ky brain around how i would sync all this RGB together in my new build lol .also, the music!!!!this video was like therapy for me 😊
2:35 Alex, you're showing your age a bit here, or rather a lack of it. The removable motherboard tray is nothing new and high-end cases used to have it as far back as the 2000s. Many of the BeQuiet Dark Base cases have them, too.
Thanks for pointing that out! Definitely didn’t know that. I haven’t seen it in any of the cases I’ve ever worked with, probably because all of the cases I use are always the mainstream RGB glass cases that have never featured this before.
@SignalRGB They don't seem like reversible fans. We can see the convex side of the fan blade, so it means the air inside the case is being exhausted.
@@MrSimplypie The three fans at the bottom have reversed fan blades, they are a product called ThermalTake Swafans. It’s always worth doing some research before saying something.
Bro has never heard of reversible fan blades. The fans at the bottom are thermaltake swafans and the blades pop out and are reversible, they are pulling air into the case
I bought signalrgb for a year to suport your work. Even tho I use more Linux than windows. But at least I know that I have a software to synchronise and control all my rgb lights when I boot into windows.Thank you!
Does the SignalRGB x Lian Li partnership mean the lian li fan controllers will work better in SignalRGB now? or maybe LConnect having compatibility with Razer RGB Controller?
I notice good news on the case, the side panel, I'm going to use that for a pump/ reservoir combo, and on every side a real black light 30cm TL tube. And there is plenty of space for that, especially with the 011 dyn EVO XL and every HD cage, is going to contain the electronic balast for the TL's. Very good isolated to prevent EMI, with copper strips and faraday fabric. This system also going to have aqua computer Octo for automatisation and temperature fast sensors and a temp/ flowmeter for steering the fans and the ARGB, all fans will be Lian Li, and I'm happy to hear you are working together on these products. I also have a Razer Chroma controller and this is going to steer all the DRGB from EKWB. The fans on the side, behind the black light tubes are going to be BeQuiet or Noctua, non RGB ones and on a slower pace, just to remove heat from the tubes. There will also be a ESP32 with relays to put the TL's on and off via my Iphone with an app. And also other things like monochrome LED strips. So this will be a very special build. It's probably my last system that I will build. Of course with the Pro version from SignalRGB. Thanks for the update. Maybe there is more to come inside this case. Anyway, this will be an high end built with Custom loops.
Sir i have deepcool LS520 240mm AIO which i cant control individually...i have been in touch with your support through emails for more than month but problem not solved yet even i purchased razer controller..recently someone on your discord server said its not possible to control all components of AIO individually bcoz deepcool doesnt do true daisy chained...is that true ?
@@SignalRGB Thank you so much for your reply ... then please suggest me any 240mm(on preference) or 360mm AIO which i can control through Razer Controller..there are plenty on your supported device list but at the end not all works properly just like my deepcool AIO which i purchased after seeing your supported device list..i asked even on your discord server but no one suggested so please tell me any specific model 🙏
@@SignalRGB ruclips.net/video/Qd209pxPzpc/видео.htmlsi=IPPWXq9mdf_LedSU Sir in this video you said corsair components are proprietary so will corsair AIO work with my razer controller which is non proprietary...sorry for asking so much but i just want to be sure bcoz am already doomed by purchasing deepcool AIO dont want to repeat same mistake !
I'm sad it's not the same of the thumbnail or the one on Twitter.... Would be cool to see how all that RGB cable and full case RGB was build and programmed
On regular office and gaming PC motherboards, the M. 2 slot closest to the CPU will most often be the one that has the highest bandwidth, but always check your motherboard manual to make sure. This is especially important if you purchase a high-end SSD.
As far as im aware the fans needs to be the type that connect together in a similar fashion to Lian Li’s unifans. I tried with normal fans and two of them will not fit. I believe the Corsair Link Fans would also fit but don’t quote me on that.
@@SignalRGB Thanks for the reply! I found the solution here: ruclips.net/video/73fpY5aoZI8/видео.htmlsi=6hZ0VPPfw_Lo_a9V&t=1076. Basically there's a motherboard low and high position, if it's on high(?) position you can put the small bracket you put on the bottom rear to the top rear, hence having another space for a 120mm fan.
The rule is that if you can: first try with tubes at the bottom, if you absolutely must mount them with tubes up that's fine but not optimal. The highest point of the radiator should be higher than the pump location, which it is in this video. Normally I would mount the AIO at the top of the case but well… the top is glass! Take a look at a lot of the promotional imagery for the case, the AIO is mounted as shown in this video.
@@myemth1506 There is no other way to do it, if you own the case then you know that the tubes don’t reach mounted down, so what is the point of this comment you made?
The rule is that if you can: first try with tubes at the bottom, if you absolutely must mount them with tubes up that's fine but not optimal. The highest point of the radiator should be higher than the pump location, which it is in this video. Normally I would mount the AIO at the top of the case but well… the top is glass! Take a look at a lot of the promotional imagery for the case, the AIO is mounted as shown in this video.
@@PumpedMLgsniper He is probably just quoting another youtuber without considering the limitations of this PC case. The rule is that if you can first try with tubes at the bottom. IF you absolutely must mount them with tubes up that's fine but not optimal. The highest point of the radiator should be higher than the pump location which it is in this video. This case doesn’t give you much choice since the top is glass and you can’t mount it there.
@@SignalRGB so if i can get it with the tubes at the bottom it will be better then with tubes on top if not tubes on top will be fine but not optimal. also are the hubs necessary to control the rgb or is it because of a lack of connectors on motherboard? if i wanted say 3-120mm lian li uni sl-inf fans reverse for radiator, 2-120mm sl-inf for the back of case, and 3-120mm sl-inf reverse for bottom of case how many hubs would i need?
@@SignalRGB Perfect,cant wait Need a new build but you cant control the AIO LCD in Signal. Hoping with the collab it makes it so I can use L-connect with SignalRGB features
that ram crunch, felt it in my chest...
Gets me every time
I have tried everything but my xpg summoner is flickering please fix this I have already tried what you said everything
@@memes1to823 Please verify that you have closed all conflicting apps. It could be XPG Prime or Armoury Crate, check task manager as well for Lightingservice.exe or Lightingkeeper.exe
@@SignalRGByes have uninstalled all the things
@@memes1to823 also make sure to delete all maps and files.
3:43 I was watching quietly until that part. Which made say out loud 'oh my damn!' I felt that one in my heart.
I love signal rgb been using it almost 2 years and ive seen how much better it has got
Finally that math is mathing thanks to signal....🎉🎉🎉🎊🎊🎊🤩🤩🤩🥳🥳🥳
Nice build. I gave my old Lian Li O11D to my nephew, replaced it with NZXT H9 Flow, I was going to go for the Vision but got a good deal on the NZXT, both cases are amazing. I would have used same fans throughout. He mixed it up with Lian Li and Corsair fans. He has plenty of space to mount the GPU vertically, So many ARGB controllers!
You should have way more subs signal rgb is sick
Waiting on my lcd fans to swap over from my h5 elite to my o11 vision. Love SignalRGB
What is the cable attached to your uni fans before you put them on the aio?
Hopefully now Lian Li can update their controller firmware to properly work with Signal RGB since you are partnered with them.
This is also a sick ass open-case if you want it to be 👍
Why did you make all of the fans exhaust?
@@sadeddinmus the fans at the bottom are thermaltake swafans and the blades pop out and are reversible, they are pulling air into the case
😂😂😂😂😂😂😂😂@@SignalRGB
@@SpongeBob-xh8ir Bro has never heard of reversible fan blades. The fans at the bottom are thermaltake swafans and the blades pop out and are reversible, they are pulling air into the case
Oh now you partner with Lian Li after I just built a full Phanteks system. Love the program, though, I need to get a different ARGB controller, the built in one in the Phanteks NV7 once it is connected to the mother board doesn't separate the different fan sections. So question with Signal RGB do you need to have multiple controllers to split the fans and AiO into separate zones?
badass video
Which thumb screw is used for the motherboard tray? The long sharp one or the shorter flat one?
How do I get all of these controllers and the usb hub?
That cable managment... Can you try do it better? More estetic? My eyes hurts.Btw nice efects. Ty for tips.
when will you update to fully support the lian li controller i can not even use mine it keeps telling me limited frame rate and i am paying for pro version
As mentioned in this video. We are guiding Lian Li on how to improve their controller firmware so that it can better support SignalRGB. The limitation is on their side. There is no ETA yet but stayed tuned over the next few months. It is not related to Pro at all, we actually don't lock any RGB control behind the pro subscription.
能帮忙给Divoom Pixoo 64x64点音像素屏做一下适配吗。
What USB expansion hub did you use?
NZXT
Will signal rgb work with the lian li rgb cables as well?
i love to use signal rgb .. but i cant connect my Redragon K556 DEVARAJAS keybord ... please help me
What is youre CPU andd GPU temperature while gaming ?
I don't see any support for the TL LCD in Signal RGB. Is it supported?
Just about anything that has a lcd will not totally work in signalrgb.
@@TheSjuris海盗船的h150i水冷的lcd屏幕就可以
Hi,
Are you working on integrating the Lian Li Uni Fan TL 120 RGB Reverse Blade 120mm 3 Pack? It comes with a controller?
Did you use reverse blades?
yes
HI can you pls include the support for ASUS TUF Gaming K1 keyboard pls
If I do intake from the bottom and back of the case and exhaust from the side mount with the radiator will I mess up my AIO cooling?
I have 2 intake at the back and 3 at the bottom and my AIO radiator is mounted to the side with 6 fans. At the moment I get around 60 degrees when idea and around 65 to 70 when gaming.
With a 7800x3d
Hey man so is the nxt expansion hub for More fans because I wanna do 10 fans
For me I use arctic fans with the Razer argb controller,
But there's one issue that I need help with the RGB lags and isn't smooth I don't know how to discribe it Bette but if I plug them into the Mainboard they work fine and the lights don'ts stutter if I use a wave effect
Please help me
Did you adjust your devices in the layouts tab and configure them in the devices tab?
@@SignalRGB yes
@@SignalRGB they also stutter in the Razer software
@@coffeintaler706 defective controller?
@@SignalRGB I have it for about a month now can I still return it
i think that adding diffrent fans looks bad like you have to Unification THE FANS IT WILL BE VERY NICE FOR ME (OPINION)
I need swafan ex selection with 20 led
Which keyboard u r using
i've been using signal for at least 4 months now and this is sick even if it do not work on my keyboard and my mouse cause they're (msi). What is that keyboard?
looks to be a corsair
Can it sync antesport?
the top panel can be replaced with a metal one?
No it cannot.
Can you show Layout ?
I’ve linked a tutorial playlist in the video description. Has everything you need to learn SignalRGB to the max.
Hey man, this is an amazing video! Can i ask if SignalRGB works with Lian Li's strimers?
I was trying to wrap ky brain around how i would sync all this RGB together in my new build lol .also, the music!!!!this video was like therapy for me 😊
2:35 Alex, you're showing your age a bit here, or rather a lack of it. The removable motherboard tray is nothing new and high-end cases used to have it as far back as the 2000s. Many of the BeQuiet Dark Base cases have them, too.
Thanks for pointing that out! Definitely didn’t know that. I haven’t seen it in any of the cases I’ve ever worked with, probably because all of the cases I use are always the mainstream RGB glass cases that have never featured this before.
How much money is this in all?
Software free... Fans..... Although gorgeous way way wayyyy too much Money
None of ur fans are set up for intake. Why are They all set up to take the air out?
Fan in the back and the 3 fans on the side are pushing air out, intake is at the bottom, they are reversible fans.
@SignalRGB They don't seem like reversible fans. We can see the convex side of the fan blade, so it means the air inside the case is being exhausted.
@@MultiKratonvideos They are called ThermalTake Swafans just google it.
All 3 coolers - exhaust. No 1 intake. Bad build.
@@MrSimplypie The three fans at the bottom have reversed fan blades, they are a product called ThermalTake Swafans. It’s always worth doing some research before saying something.
only one? ): i have a keyboard and mouse witch are redragon ):
All are exaust fan 😂🤡💀
Bro has never heard of reversible fan blades. The fans at the bottom are thermaltake swafans and the blades pop out and are reversible, they are pulling air into the case
I bought signalrgb for a year to suport your work. Even tho I use more Linux than windows. But at least I know that I have a software to synchronise and control all my rgb lights when I boot into windows.Thank you!
Why isn't there a trigger warning on that ram mistake
Can you add support for amd gpu argb
You should leave the plastic socket cover on the motherboard when installing the CPU. As it locked down, the plastic cover pops off.
please add fans : Lian LI UNI FAN TL LCD
Do you need the razer controller?
Does the SignalRGB x Lian Li partnership mean the lian li fan controllers will work better in SignalRGB now? or maybe LConnect having compatibility with Razer RGB Controller?
Yes we are hoping that Lian Li can improve the controller to better work with SignalRGB.
Or u can improve ur software to work better with Lian li hub Im almost getting flashing errors with your guys software
@@Metroidslayer66 We cant fix it, Its Lian Lis product design thats the problem. It cant handle direct usb control without lag and other issues.
I notice good news on the case, the side panel, I'm going to use that for a pump/ reservoir combo, and on every side a real black light 30cm TL tube. And there is plenty of space for that, especially with the 011 dyn EVO XL and every HD cage, is going to contain the electronic balast for the TL's. Very good isolated to prevent EMI, with copper strips and faraday fabric. This system also going to have aqua computer Octo for automatisation and temperature fast sensors and a temp/ flowmeter for steering the fans and the ARGB, all fans will be Lian Li, and I'm happy to hear you are working together on these products. I also have a Razer Chroma controller and this is going to steer all the DRGB from EKWB. The fans on the side, behind the black light tubes are going to be BeQuiet or Noctua, non RGB ones and on a slower pace, just to remove heat from the tubes. There will also be a ESP32 with relays to put the TL's on and off via my Iphone with an app. And also other things like monochrome LED strips. So this will be a very special build. It's probably my last system that I will build. Of course with the Pro version from SignalRGB. Thanks for the update. Maybe there is more to come inside this case. Anyway, this will be an high end built with Custom loops.
I wanted to use signalrgb but they dont support amd gpus 😢
Watched you miss the i/o shield plastic wrap atleast 3+ times, then didnt install my plate before mounting 🤦♂️🤦♂️
Awesome vid !
So what kind of controllers or what not would I need if I want to run the Loan Li AIO, and 5 Lian Li LCD fans? signalRGB rookie here.
Is there any way I can synchronize my RAM memory, which is the same as the one used in the video, in the Lian Li color app?
Removable motherboard trays used to be a thing on all cases... God I'm old.
any update regarding lian li hubs and the lag issues?
Can i vertical mount 4080 in thiw case?
Is the lian li Galahad 2 compatible with signal?
Sir i have deepcool LS520 240mm AIO which i cant control individually...i have been in touch with your support through emails for more than month but problem not solved yet even i purchased razer controller..recently someone on your discord server said its not possible to control all components of AIO individually bcoz deepcool doesnt do true daisy chained...is that true ?
@@Iconic11111 It’s probably true if someone said that. Which would also explain why support couldn’t help you. It’s a hardware limitation.
@@SignalRGB Thank you so much for your reply ... then please suggest me any 240mm(on preference) or 360mm AIO which i can control through Razer Controller..there are plenty on your supported device list but at the end not all works properly just like my deepcool AIO which i purchased after seeing your supported device list..i asked even on your discord server but no one suggested so please tell me any specific model 🙏
@@Iconic11111 Any of the Corsair aios will be controllable just fine
@@SignalRGB ruclips.net/video/Qd209pxPzpc/видео.htmlsi=IPPWXq9mdf_LedSU
Sir in this video you said corsair components are proprietary so will corsair AIO work with my razer controller which is non proprietary...sorry for asking so much but i just want to be sure bcoz am already doomed by purchasing deepcool AIO dont want to repeat same mistake !
@@Iconic11111 The Corsair AIO comes with its own controller so you wouldnt need the Razer one.
Which keyboard are you using
I'm sad it's not the same of the thumbnail or the one on Twitter.... Would be cool to see how all that RGB cable and full case RGB was build and programmed
Huh?
I have coolermaster fans and AIO and nothing shows up in devices, just my motherboard, any idea why this is? Is coolermaster not supported?
If your aio and fans are connected to the motherboard headers then you need to configure that in the devices tab in your motherboard.
I'm only seeing 360p resolution for the video... will wait for better pixels before I watch :)
Looks like HD is up now!
Curious why you chose that particular m.2 connector. Does it matter which is used?
On regular office and gaming PC motherboards, the M. 2 slot closest to the CPU will most often be the one that has the highest bandwidth, but always check your motherboard manual to make sure. This is especially important if you purchase a high-end SSD.
Hello you mentioned it will fit two fans in the rear if using Lian li's fans but I've seen builds with other fans there. Can you clarify?
As far as im aware the fans needs to be the type that connect together in a similar fashion to Lian Li’s unifans. I tried with normal fans and two of them will not fit. I believe the Corsair Link Fans would also fit but don’t quote me on that.
@@SignalRGB Thanks for the reply! I found the solution here: ruclips.net/video/73fpY5aoZI8/видео.htmlsi=6hZ0VPPfw_Lo_a9V&t=1076. Basically there's a motherboard low and high position, if it's on high(?) position you can put the small bracket you put on the bottom rear to the top rear, hence having another space for a 120mm fan.
@@YuuriPenas oh wow i had no idea, thats really cool
Your radiator is not mounted properly, you'll have air near the fittings and in the pump, the tubes should be down.
The rule is that if you can: first try with tubes at the bottom, if you absolutely must mount them with tubes up that's fine but not optimal.
The highest point of the radiator should be higher than the pump location, which it is in this video. Normally I would mount the AIO at the top of the case but well… the top is glass! Take a look at a lot of the promotional imagery for the case, the AIO is mounted as shown in this video.
I'm aware, I have the same case.
What is shown in the promo is indeed not optimal.
@@myemth1506 There is no other way to do it, if you own the case then you know that the tubes don’t reach mounted down, so what is the point of this comment you made?
Again wrong AIO mounting position.. the AIO will be sub optimal and will fail sooner due to air pockets at the top most position of the system.
how would you mount the AIO?
The rule is that if you can: first try with tubes at the bottom, if you absolutely must mount them with tubes up that's fine but not optimal.
The highest point of the radiator should be higher than the pump location, which it is in this video. Normally I would mount the AIO at the top of the case but well… the top is glass! Take a look at a lot of the promotional imagery for the case, the AIO is mounted as shown in this video.
@@PumpedMLgsniper He is probably just quoting another youtuber without considering the limitations of this PC case. The rule is that if you can first try with tubes at the bottom. IF you absolutely must mount them with tubes up that's fine but not optimal. The highest point of the radiator should be higher than the pump location which it is in this video. This case doesn’t give you much choice since the top is glass and you can’t mount it there.
@@SignalRGB so if i can get it with the tubes at the bottom it will be better then with tubes on top if not tubes on top will be fine but not optimal. also are the hubs necessary to control the rgb or is it because of a lack of connectors on motherboard? if i wanted say 3-120mm lian li uni sl-inf fans reverse for radiator, 2-120mm sl-inf for the back of case, and 3-120mm sl-inf reverse for bottom of case how many hubs would i need?
So, you installed 7 OUTPUT Fans! NO INTAKE???
Fan in the back and the 3 fans on the side are pushing air out, intake is at the bottom, they are reversible fans.
@@SignalRGB at 8:41 it’s clearly that the 3 bottom fans blowing outside.
@@sinotnasinotna5861 The blades on the fans are reversible. They are called Thermaltake SWAfans, google it.
Any update on the collab?
Lian Li developers are working on it to accommodate SignalRGB
@@SignalRGB Perfect,cant wait
Need a new build but you cant control the AIO LCD in Signal. Hoping with the collab it makes it so I can use L-connect with SignalRGB features