Why You Should Buy These Clamps
HTML-код
- Опубликовано: 26 июл 2024
- My Work Boots: John Bull Cougar 2.0
Bessey Ratcheting Clamps amzn.to/2JNgtoa
Bosch Dust Bag for Table Saw amzn.to/2Luba08
The Camera Lens thing is a "Variable ND Filter" Search for one that will match your camera :)
Music by Jordyn Edmonds / jordynedmonds
Second track by Lakey Inspired / lakeyinspired
...
I'M ON INSTAGRAM TOO
scottbrownc...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
Donate here if you want to help the channel, thanks!
www.paypal.com/cgi-bin/webscr...
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer: These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this RUclips channel and shall not have any liability in respect of any injury or damage that may result. To view full disclaimer, click here: www.scottbrowncarpentry.com/d... 
Хобби
![Young Nudy - John Wayne (feat. Metro Boomin) [Official Video]](http://i.ytimg.com/vi/NY8HnYYo2fo/mqdefault.jpg)
Nice Clamps Scott, love your channel. Keep it up
I've been using the Bessey clamps for the last 30 years, and I'm still using the same pair just had to replace
the springs in them, keep up the good work !!
Thanks for sharing. I am in my 60s and new to woodworking. I have done a lot of repairs and built a deck or two but no real woodwork. Everything is new to me. Now a need to build a proper work bench. Take care.
Love watching your channel, and yes over in England we always have a shipping charge on amazon that’s why I try and stick to ordering from Ebay
As a carpenter myself, I must admit when I saw you building that workbench - I thought fuck lugging that big ass thing around all day. 😂
Scott, I had the same problem with a workbench, What i ended up doing is cutting a pc of 3/4” furniture birch plywood to 36”x48”. I also placed the 3/4” bench dog holes every 4” across and the length of the plywood. I just put that pc on saw horses and viola, i have a work bench modeled after the mft table. (Which by the way i have and love) what i love about the plywood work bench is its light and easy to move around. Keep up the good work.
My first ever work boots in 1984 were John Bulls. The classic Orange leather with Green sole and toe-cap.
I love watching your videos! The plywood wall project was the first few of your videos that I watched, and I saw you using those clamps and immediately thought, "What are those clamps, they work like Festool quick clamps, (maybe cheaper?). I should get some! I only discovered your channel about a month ago and I'm hooked! Super happy to learn from you that Makita and Bessey have some equal options to Festools. despite having drunk the Festool kool-aid 16 years ago when they launched in the US with my first vac and sander. As an Industrial Designer, I love using well-designed tools. Thinking about redoing the kitchen cabinets myself. Very glad you included your dad's cracked shower floor in this video since I just arrived at my parents where I am addressing a similar situation. Wish you showed the removing of the shower pan though.
Carolyn the Festool clamps are made by Bessey
For the longest time I had two torsion beams which were 2 feet wide and 7 feet long (so I could fit them in the bed of my truck). They worked for me for onsite work for the longest time; however, I am not a builder. I am a hobbyist woodworker and handyman. Best of luck to you for figuring what will suit you the best!
Recently got a wet grinder through Machinery Warehouse. It has a tool holder to keep chisels square with the stone & a leather wheel for final dressing. My chisels have never been so sharp
Hey Scott, the guy that designed that bench actually said the same stuff about it being too bulky, and he has made a V2 of it, which I think you will find waaaay better, it has a few extra bits that you might find super useful, and is twice as portable. It would be wicked to see a video of you making that one!
Cheers for the awesome videos!
bought a pair of those Bessey Clamps a few months back. They are very useful and easy to use.
Got them. Really good stuff, cant live without them.
Drill a couple of big holes underneath and clamp those legs on when you set up Scott!
Great vids, keep em up!
good idea
Finally know why you have all the holes in the bench! Awesome
I built a similar bench . Made it in two sections. I put a spot in one of them for a miter saw . Works nice because if the space where I’m working is tight I only use half of it .
Love the new gadgets! I need all of those things haha. Also, will be happy to take your work bench off your hands and make you a smaller one in return :p
I love you man. Like a brother. I know a trimmer that reminds me of you. If you ever come to America- Minnesota let me know.
You need wheels on one end so you can wheel the bench around instead of lugging it.
Hooked on your videos mate and love the funky tunes that go with the vids I’ve got to ask where do you get them from and what are some of them called
Keep them coming mate great work
Doing well.. 55k subscribers!! Well done.😎
Love your vidz ! Watch them every day :) seen anything from the new Lotr set in Aukland? ;)
Hey Scott another great video
Nice stuff, I have smaller version of that bench, that folds into the back of a portable tool trolley, bench is about 1200 by 600. Also building attachable side tables so that I can rip full sheets if need be, but don’t need them all the time, hence the attachable nature of them.
The trolley is of course on wheels so I can push it around, and it holds four shelves with boxes to hold tools and screws etc.
TBH mate I did think almost three sheets of ply might be too heavy to easily lug around jobs...so I built a smaller one and I'm stoked with it
Just got the same clamps! Kicking myself for wait so long!
I was semi-joking last time - but seriously take a look at plastic pallets mate... they're available in a range of sizes, they're strong, light-ish at about 7kg, they're cheap/free (trademe, facebook markets, or just hunt around some industrial areas) so it's not an expensive experiment, and if it actually works out for you, replacement 'parts' are cheap and readily available. You can get the type with grid tops - they have rubber non-slip pads built in by the way, or, you could get a solid top type (e.g. www.secureaload.co.nz/pp_used.html ) and drill the holes you want. They have the open sides just like the paulk table. The main question mark, (apart from how would you live with the aesthetic lol) is fitting the legs. I've got a bunch of them for another project, but right now I have them in three stacks for a work platform for the posts and rails for my fence: imgur.com/a/Ot3kqVg
Rawiri Blundell I like that idea! Will keep my eyes open.
Hi Scott, for you next table that you make. Only make the top. Basically a sheet off ply with the same holes. Also you can cut a handle in it to carry.
Much lighter and better for transportation and storage.
So tempted to make one of these benches, but so big for the van😅
I made the same stile bench years a go but i made it in 2 sections (18’x6’) sections and it works well and ease move
Don't let your soul get worn down laddy.
I finished a long day of moving a huge water tank which we cut in half to get up a large flight of steep deck stairs. When finished I hosed off the stairs with water to clean up the debris.
My soles glided on the slick deck surface and I bounced down the stairs backwards banging my lower back vertabrae on every step.
I cannot describe the pain, plus time off to heal.
All because I let my souls wear thin.
Cameron will be pleased you got your own clamps matey LOL!!!!!
Hi there, I just came across your channel and started to follow.
Been watching some of your older videos.
I noticed you use three framing guns, airbow, hitachi and the pass load.
Which would you consider the best. I am in Boston. I’ve never seen the airbow before . The hitachi has just been on the market here for the last year or so.
I bet it felt like Christmas picking up all of your mail!
Hey hey hey, I need a giant table saw sock!! Was that from Amazon? What a great idea, can you show it in action to see if its any good? Pretty please 👍
Happy birthday Scott
You can almost never have enough clamps. Love those new self adjust Kreg clamps.
I built an 8x4 bench like that in two 2ft wide sections. I’d build your new on in two sections if you can use one your laughing but have the option of the extra space if not
Just an idea (ignore if it does not make sense :) ) ... cut the workbench exactly in half, reinforce the side you have cut (maybe with a ply-wood side wall, then at the bottom of each half (where they originally would meet, put some sort of bolt down device that tighten's them together for the times you need the full bench. This way, you'll have 2 smaller benches or 1 big bench when you need it. Just a thought :) Keep up the good work.
If its possible to rip in half try it and maybe add hinges on one side to join the two. Then you could fold it closed for half size and fold it open for full size areas. Also could add a few wheels at the corners to help with portability. Keep up the good work brother.
Hey Scott, im a builder in Auckland. Love your vids, subscriber from way back. Whats the name of the shop you get your makita gear from??
Where's Gaston at to get a NZ stockist for those clamps?!
found the clamps.look great
After sharpening, you should burnish the edge. Sharpening creates a lot of micro tears at the tip of the blade. A burnisher flattens those tears back into the metal, and you end up with an even sharper blade. Works every time. This is why teh Burnisher was invented.
Best clamp out there, hands down.
I had to laugh when I saw the Bosch dust bag. I knew exactly what was about to happen. I think all us Dewalt Table saw users have the same one. Nice pickup. That bag works great btw. You’ll really be glad you got it.
Oh where do I get one in the uk
JuiceBanger1 I’m not really sure. You can can use Amazon right? Lol. Mine is a Bosch TS1004. But I have a little bit different saw than his. I have the job site table saw that is on the rolling cart. Not sure if the dust port diameter is different or not. You could easily google it and go see some pics and reviews on Amazon. Good luck brother.
@@DisconXion I've the dw745 jobsite saw. Il check amazon thanks.
You could perhaps mount casters at the bottom edge of the workbench, use the non-swivel kind. Then you will be able to move the workbench out of the van much easier and just roll it into place.
so friggin exciting !!!!!!!!
Puncture proof soles are great for anymore working extensive demolition. My dad doesn’t feel his feet and has walked on nails more than once
That Paulk style bench is supposed to be portable but it’s not really. I built one and love using it but it’s way too cumbersome. Love your channel . Keep the videos coming.
Thanks
Have you though about making two smaller ones then can have one at either end of what you are working on like a saw horse I do similar with two MFT tables
Hi Scott have you considered bora centipede? I do my carpentry and cutting all on it and just needs 1" foam and half inch plywood any grade , get the 4x8 version
Great video Scott. Have you seen the UJK Part Guide system from Axminster Tools in the UK? Bought the Mk I (Mk II out now) and have built a workshop and also a portable cutting station from 18mm MRMDF. The guy that invented it has loads of RUclips vids on this and you can bash out a speedy cutting station in less than 15 mins!
Who did you support in the cricket world cup final England or new Zealand
I was about to buy Festools ratcheting clamps, these are a few bucks cheaper. Thanks for posting
3:44 Are these similiar to *Dog Hole Bench Clamps or bench hold fast clamps ??*
Cool vid!
There is a video about modifying Irwin quickgrip clamps to do what those clamps do.
Hi Scott, I also built one of those work benches, but I modified the design so it's two 8' by 2' sections with four legs so I can set it up as one long 16' bench or in an L shape or two separate units or just use one.
Do you have pictures of that setup? That is an interesting idea. What sort of legs do you use? I like the idea of the wooden sawhorses. These won't fit in the workbench after changing the dimensions. So I'm curious about how the redesign comes together.
@@adriaan7627 I do I'll add them to my next reply, I've used the ply wood legs sameish design just a lot narrower four legs in total two for each section. Then drilled holes on each side and end of both units so i can bolt them together if required. I find them a lot more useable and easy to move than one large 8'x4' unit
ok so can't add pictures to a reply!
Chris Kenny Guess you have to make a movie 😁
@@adriaan7627 no need this is basically what I did!!! ruclips.net/video/1AA7wo8BWGw/видео.html
Hey bro. I’m looking for some clamps to mount in my van for levels, rails etc. is this what Cameron used? Cheers
If it doesnt have FESTOOL printed on it then Kameron wont have it 😁
Any idea why the shower tray failed and cracked like that? Uneven floor?
Ron Paulk's original bench was built in two pieces, each 24" x 96". I've found that holding down the width like that makes each half of the bench much more easily portaged, as well as usable by itself for many tasks involving lumber, trim, or just about anything besides full sheet goods. Fastcap altered the design, making it as a single piece, both shorter and much wider. This move to simplify cancelled one of the most important characteristics of Ron's original design IMO.
Maybe drill a couple holes through your horses and use the clamps to attach them to the bench top or get clasps/chest latches and and use them to secure them together. Then you could have different size bench tops you could use with the same base.
Has anyone got any tips for removing butenol from steel and timber with out using a flame torch ? I've been using a multitool, skillsaw and knife /scraper just wondering if there is a quicker way
Would splitting your existing bench in two so you have a smaller bench or clip the two halves back together when necessary. Making for a more manageable bench..
Is it possible to cut your new bench in half along its longest dimension? Then add new sides on each, then carry one or two benches to the job site as needed. If you need two carry each to the work horses and fasten to horses. Or you could add foldout legs to each, then when you need a bigger workbench, set them side by side and clamp together from underneath. Or some sort of bolt system through the two sides that draw the two workbenches tight up against each other. You would need a way to access the inner part of the table. I plan on making two 2x6 tables of similar design and maybe using some very lightweight plywood I have seen Ron Paulk use. But as of yet, that plywood isn't available in my area.
Will you be selling that bench? (Im in hamilton)
Do your boots have steel mid-soles? If so, no should prevent nail from going through, if not then yes, that's why if penetration injury is identified on risk assessment for a site in UK, steel mid-soles are required. All our waste site inspectors need to have them.
You should try Finnish Sievi safety working shoes. The best in the world. I don´t know if they are at hand in NZ tho.
John bull is pretty good
He should actually try and listen to some blueface or kodak black
fanaticz666
Danner Boots make my favorite boots, if they only made a non slip construction boot.
great clamps, i have festool ones.. might get a set of these as are cheaper lol
Cheaper and probably better. Festool is a rip off.
@@smokingcheeba420 The Festool clamps are made by Bessey (both German companies), you just pay a premium for the Festool colour and name I think...
Well proud to own bessey clamps and not a single festool.
Germans make great stuff. I love grk screws.
How well does the Bosch dustbag work with your Dewalt saw?
badchips10 yeah that I wana know, I've seen guys make down pipes out of pvc for them then the dust collects in a bucket thought that was an ok idea as well
That looks like a Marples chisel before they were bought out. Nice edge
Awesome scott those t claps are really good if ya want an idea for a bench I just dropped a vid on my channel...👍
Cool clamps dont seem to be on sale at Amazon uk , thinking of buying a track saw 230v or 36v Makita but im not sure which one would be any ideas ?
36v is a ripper mate.
Hi Scott, Love your channel and your overall vibe. Been watching as many videos as possible recently. I have a random question. Your work partner's name is spelled Paerau, yet when you say his name, is sounds to me, like you are saying pottor or potter. Can you explain why that is? Keep up the great work.
Cheers man. Paerau Is pronounced 'Py-Ro' and you roll the 'R' . Maybe the rolling of the R sounds like a 'T'?
It's a Maori name.
@@ScottBrownCarpentry thanks for the quick reply. I'm in New Jersey USA love learning about New Zealand from your channel. Now I want to visit some day!
Or maybe it's cos when it's pronounced properly it sounds too much like pirau!!
Admitting we have a problem is the first step Scott. Now get that workbench done
For cheaper shipping from the US use NZ Post's YouShop service. Much cheaper than using the typical Amazon shipping option. Drop ship to an address in Oregon.
Should have built the paulk workbench 2, much easier to transport and setup
Just cut the table in half Scott.. 2ft by 8ft or even 2 by 6 would be big enough.. What make are the clamps?
He said it in the video, put it in the description and even provided a link for them, how lazy are you lol? Does your mom dress you in the morning and get you ready for work haha
Albertdog101 haha
Speak metric too please
ILoveLSD13 He’s right though. It’s too big. About as long but half the depth. I keep a plywood sheet in the roof of my van, 2 ft by 6 ft, whatever the conversion is, and a couple plastic horses. For added strength, I’ll add a couple of 6 ft balusters underneath.
I made my bench 1200x1200mm works for most jobs
are those steel capped boots? Just no steel sole?
Hi Bro, you live around Onehunga?
Check out "Piher Mini Quick T-track" clamps
Rebuild your bench making it two joinable lengthwise halves. Half the weight and size and full when needed. That's what I did using the Paulo design.
You mean cut it in half right ??..
Onasis Aristotle - yes but lenghtwise
Smaller bench or a bigger van?
did john bull ever get in contact?
You should make a stand for it like an ambulance stretcher
cut it in half and bolt together when a large bench is needed. or build it out of lego so it can be any size.
Hi Scott, I’m a handyman and do many things, cabinet making is one of them, I bought a set of Toughbuilt C700 sawhorses, 2 length of 90 x 45 x 2400mm pine and a 1200 x 2400 x 19mm plywood and it’s just amazing how quick I can set it up. I’d like to send you some photos but won’t allow me here
Upload to imgur.com and share the link :)
Imgurs mustard. Love it. Thks.
@@rawiriblundell imgur.com/fRXzuyN imgur.com/HIRJ5Cp imgur.com/8VjzFZj imgur.com/ZQCLD6G imgur.com/dkPHXO7
What harness do you use Scott I’ve been looking for one for ages can’t find it tho
Check out my links in the description of this video. Occidental leather straps. Really good!
Scott Brown Carpentry thanks man love the vids bro you’ve made me start studying to become a apprentice carpenter can’t say thanks enough!
As for those boots they may not have a anti penetrating plate in the sole. I always wear Oliver boots
Noooo Scott, not the slip-ons. I’ve given up on them mate. Full laces all the way.
Your kitties cool 👍
check out kliklamp from bessey, same mechnism!
Do these also fit track for track saw ??
I just did the Paulk plywood stands in the plans and they hold up to an immense amount of weight. Those legs are sorta janky and not up to the task. ☹️
Also cut the bench down the middle and make a few new side pieces. Them you can put them together with a few nuts and bolts or just use one side. I did that with the 4'x8' version. Way easier to move around two pieces.
Cut the bench in half and give/sell/? the other half to your sidekick? :)
Haha Paerau will love being called Scott’s “sidekick”
@@azza1793 Wingman then? ;)
Never figured out why you would need such an awkward table on a jobsite. Useful for a workshop yeah but it doesnt look portable to me. Just use stools, couple of sticks amd one sheet of the sheetgoods your using. KISS. Anyway, up tp you if you wanna lug stuff like that around. Incidentally, do you know of those clamps would fit the dewalt track saw? Dewalt ones are ratger expensive. Thanks
Try blue steels next time, most comfy boots you’ll but on your feet
Check out "ask woodman". He was using those clamps 10+ years ago
No steel plate mid sole on your new boots not good
What's wrong with old tools. I still have a Yankee Screwdriver and my Stanley chisels, Claw hammer and Plane are over 30 years old from when I first started woodworking :)