Hydraulic Press Vs. Ball Bearing Frozen In Liquid Nitrogen + Red Hot Ball Bearing
HTML-код
- Опубликовано: 4 ноя 2022
- Exploding liquid nitrogen cooled Ball Bearing and red hot ball bearing with a 150 ton Hydraulic Press. Used force is measured with 240 ton force sensor and explosion is filmed with Chronos 2.1 high speed camera 1500 frames per second in this viral experiment video!
Our second channel / @beyondthepress
/ officialhpc / hydraulicpresschannel
Link to super slow motion video with ball bearings • Exploding Ball Bearing...
Do not try this at home!! or at any where else!!
Music Thor's Hammer-Ethan Meixell Наука
Thanks to my friend Tami for explaining the weird results for me. If you are interested on hardening and heat treatment of huge steel parts go check out this video on Beyond the Press ruclips.net/video/_lMw80S6ldc/видео.html There Tami shows their heat treatment facility at ATA Gears.
Freeze the press plates and then stick a hot ball bearing in it to be crushed, please and thanks!
the surface just reflected the sparks, the surface is not getting hot.
i didn't think it was necessary to comment 😅
Where do you buy liquid nitrogen in Finland?
I need it for experiments, is it legal without permits?
👍very very cool vid, as always🙂👍
Genuinely, I love it whenever the gopro sitting within the space of the press itself goes flying up into the air due to the force. Always funny to watch and just go "WEEEEEEE" as it flies up into the air.
I've heard of people cooling their balls with ice packs to improve performance, but using liquid nitrogen seems a bit hardcore to me.
A lot is wrong but, what you said is hillarious!
@@wYatt121509 ..ya..an ice pack sounds pretty nice if u had ur balls busted...dont know about liquid nitrogen... but thay say some ppl has balls of steel so...who knows... 😁😁😁
And some guys are, for a lack of further elaboration, presumably stapling their balls on walls to further improve or surpass levels of performance previously considered to be the maximum.
You guys are sussy
@@mursuhillo242 the walls have balls
Cryogenically treating steel can make it surprisingly strong. It's used to heat treat drill bits sometimes
I had never heard of that before. I think I have to try with more parts on future video
@@HydraulicPressChannel that could be Prrritti Guud video. 👍
Cryo treating from applied science ruclips.net/video/hAxi5YXTjEk/видео.html
@@HydraulicPressChannel
Applied Science made a good video on it, it's a great channel you should check out
A lack-of-heat treat
I'm sure that you and the Slow Mo Guys would have a great time together no matter what crazy experiments you decided to do! (But I'm sure they'd prefer to visit Finland in summer :D )
It's not gonna happen.
There is nothing they can add, they have a fast camera and nothing else
@@mruniverse9500 A collab is about more than just what you can bring object wise, they can very easily communicate online about things they might want to crush and deicide if it's worthwhile endeavor. If personalities mesh in a way that just results in a good video it can gain views and subscribers on each others channels(not that they really need it). And they may just want to go to Finland anyways to visit.
I'd love to see the individual cracks appear
@@mruniverse9500 they have expertise about lighting, focusing, and production. as well as intricate knowledge about slo-motion filming itself. they would make it look a hundredfold better, even though its the same subject.
he just needs a phantom camera
I never thought I'd see the day where anything actually STOPPED the hydraulic press at maximum. Wow!
It would be cool to see a slo mo guys team up vid
Facts
Or Destin from Smarter Every Day
@@bobtiley he’s great too!
It would, but they snub everyone. Have been for years.
They probably wouldn’t go to Finland for that
That 320000fps shot at the end is absolutely amazing. You see visualizations of high speed explosions and they obviously don't do it justice. The way the pulverized material hangs in the air at specific angles and in specific color ranges is really cool.
Mach two point four four. Holy shit!
Watch it in 0.25x
So great to see Anni being involved in vids again. Even just having her reactions on audio really brightens the mood of your vids.
There are few visuals more satisfying to me than watching scale flake off of hot steel under pressure.
2:20 Sounds like an accent an American actor tries to make to sound foreign. 😂
these videos are getting more and more crazy, keep it up !
Z
I love your videos, but when Anni is there providing reactions, it just kicks them up a notch. 😂
Has she been gone? Their channel was just recently recommended to me again
Hydraulic Press Channel has the strongest balls of steel!
Hoodrolic
WHAT THA hELL 2:08 I love the finns accent to funny people! from sweden!
What a wonderful example of how pressure creates heat , as you can clearly see the transition as you work the press.
High quality content. Loved the slo-mo. Glad to see Anni there. Cheers.
Making the balls colder increases their brittleness, but what that really means is its hardness goes way up, but their ability to absorb shock goes way down. so it would be easier to throw a frozen ball bearing at the ground to break it than to just apply force to break it.
So what you're saying is that they would make excellent ammunition for a railgun
@@kaden-sd6vb what i think would make excellent ammunition for a railgun is railgun ammunition
@@goodgenes0 I am guessing you set fire to your toast every morning.😅
B a l l s .
@@kaden-sd6vb Cooper would be better
yaaay, Anni's back 🙌
Hi Anni!
Was cool to see the heat transferring from the pressure points down to the middle of the ball
Wow! Your filming setup is so much better these days!
Thanks! I have but lot of money and effort on building it so good to hear that all that pays off
@@HydraulicPressChannel I remember when you used to squash the plasticine models your partner made
I might be high on sugar but when I hear that slomo blast sound 0:53 and see those lamps falling inside, it cracks me up 😂🤣☠ thank you for the entertainment 🖤
This has likely been said already, but I’m almost certain the ball bearing from the previous video didn’t get red hot at all. What you saw was a frame where the sparks blurred as they shot across the flat surfaces of the press tools and the rounded surface of the bearing reflected the blurred sparks making it appear as if the bearing was hot.
It would be interesting to aim a laser thermometer at the ball, and see what the temperature is while he crushes it. I’m sure it does indeed heat up, all that friction of the atoms changing place, and breaking molecular bonds, but just now hot? In this video, he said the cold bearings were still cold after he attempted to crush them, but they were super cold to start with. Knowing it’s exact temp as the pressure increases would be interesting.
You can clearly see the metal heat up on some parts, like the sockets. The condensation on the surface disappears when some of the cooled objects start being pressed. To what degree they heat up is a bit less clear, however.
@@Xeroisawesome yes they obviously heat up, but they don’t become red hot for fractions of seconds. That’s impossible anyway.
Freeze frame at 0:38 is a great thumbnail! Also nice to see Anni again :D
As an engineer student, it is cool to see the theory in practice
"Big ass bearing balls" 😂. Idk why that caught me off guard, but I literally laughed out loud. That's funny af, thanks for that
Thank you for showing the super slow motion versions!
That Slo-mo was gorgeous... 😍
The way that everything jumps, falls apart and gets absolutely destroyed around the press in every video is hilarious 😅
The cryogenically hardened ball bearing was intense. Is this the first time the all-powerful Hydraulic Press has been defeated?
Never underestimate the power of the balls of steel. Especially if given more that just cool water to cool them.
I absolutely love this channel. Thank you for your hard work and dedication to showing us your fantastic videos!
Thank you for showing up Anni, you make every video better, it's more like a family environment..
3:30 Unexpected Cosmo and Wanda.
Unexpected
The red hot ceramic ball was probably the most dangerous piece you ever tried to crush... this could've gone really wrong! 😅
/edit: I probably got that wrong. Maybe the ceramic ball wasn't hot.
why? hot rocks dangerous?
homemade armor piercing ammunition test. lmao.
But they are behind a pretty thick polycarbonate shield, in addition to the main protection(which is usally enough already), so i think the risk of bodily injury is quite low.
@@mxecho Because it can still brittle AF, even if it is 1000°C hot. And could then still explode violently and spreading shrapnells with even higher energy than steel. And start a fire wherever one lands.
Depends on the type of ceramic, though.
I rarely get raised blood pressure from these vids, but this one did it! 😅
@@jort93z The reaction of polycarbonate to 1000°C hot shrapnel would probably interesting. ;)
I don't think it would pierce, though.
Actaully hot meta is more smushable then cold
I would love to see a collab between your channel and Slow-Mo-Guys. that would be a greatly amusing and maybe even educational episode. Great content as usual either way.
While you are watching this video, Ukrainian soldiers are committing war crimes
I like the videos when Lauri makes things "more explody."😁
Prrritti Guud. 👍
I have been watching your videos for about a year and got super hyped as soon as I saw the Phantom camera at the end. Since 2013 I've been a big fan of The Slow Mo Guys and they are pretty much half of my inspiration and smarts for cinematography. One of my favorite things about your channel is the amazing camera quality that each and every video delivers. Image sensor size and dynamic range often matters more than resolution. The only thing better than the HPC is with the shenanigans of Gav & Dan. Would be a dream come true if you guys collaborated.
The cams are a lot, so undersood, but the fact that the small bearing just vaporized is insane. Love it as always!!!!
Just wanna say the last one in slowmo was so beautiful. Good job
I love his temperature messurement skills; »It's cold, alright!?« 🤣👍
my theory is the little dent that formed from destroying previous balls create a "holding" cushion that makes the cold ball harder to crush.
pressure with less surface create more penetration, the sunken dent create more surface that caused the ball become harder to crush
This channel has always been Awesome!!!! You guys are cool cats!!
It's my first time I watched your video 🤣 you sound like retired Mario by the respect man keep it up
The faster cameras are nice, but we come here because of you and your ideas.
Excited for spess-ee-all guest!
At least it’s comforting to know Dracula picked up a less violent hobby.
You heard your community and showed us a (past) video with real slow mo. Thank you :)
Thank you for getting that camera for this video! The footage was absolutely incredible!!
Great video Lauri and Ani. Thank you.
I say your high speed cameras are good enough. I just appreciate your content regardless.
A great demonstration of fine particles of iron being pyrophoric.
I love the high speed shots
Anni is back! Haven't heard her laughter in the last few videos I watched.
Congratulations on discovering the power of cryo-tempered steel.
18K views + in one hour.
I work with steel, and to see what loading this stuff can handle is always amazing.
You have a great channel, and all the hard work that goes into all this is very much appreciated . I also replay the exploding bits. What this shows us is how the material is held together atomically. And the energy that is released when subject to force loading.
I came across an interesting fact the other day. Each atom in a atomic nucleus is held together with a force of 20 lbs. So how many atoms released their 20 lbs at 7:53?
Another fact I came across was that you could line up 11,000,000 atoms across the point on a pin. So the energy released here is enormous. Kind regards, and greetings from Africa.
I don’t think a press can achieve nuclear fission like splitting atoms. If it did there’d be a crater on the lot the press once resided.
Hate to break it to you, but what you're seeing is more of a crystal shattering and breaking chemical bonds, no atomic action. 😏
@@technoman9000 Thankyou for taking the trouble to comment. I am referring to the iron + carbon, and other alloys in the material. Fe atoms extreme dislocation. Metal to metal bonds.
I just want to say I'm glad to see more original content from you recently. The stream of compilation videos just doesn't engage me at all, the part I like watching for is hearing what you're doing, why, and what your expectations are. Explosions are just a bonus, I'd watch without them lol
Slow motion was Like a star collapsing on itself an going super nova. You created your own Big Bang
Nice seeing Anni back again
Seeing your new cameras reminded me of my max stats in the Hydraulic Press mobile game lol.
I now hypothesize that our understanding of the universe’s Big Bang is nothing but a ball bearing being smushed
Fantastic video, always love watching the press squish things.
The colored nails of your wife are very very nice
Chrome Alloy Steel Balls, the most common bearing alloy, are manufactured from steel of the hardening type AISI E-52100.
52100 is a relatively simple steel with 1% carbon and 1.5% chromium, and small amounts of Mn and Si. In use since 1905.
This channel takes the theme of Bad idea to do with heavy machinery and Hold my Beer , to the next level now with Science, Haha. I luv hearing the guy's Finnish accent , and when things Explode, the reactions are Priceless ! Slow Mo shots are really cool to see , Pun intended.
"Vat 'de' Hell" is so freaking cool :D LOL nice catchphrase
A colab with the slow mo guys would be so epic!!!!
The slow-mo of the BB exploding looks exactly like the Death Star explosion.
0:48 that FUCKING SCARED THE HOLY SHIT OUT OF ME.. JESUS
"Vut da hill!" You cryo treated the steel. XD
Ball bearing crushing is my favorite thing so far.
Omg I'd love to see a Hydraulic Press Channel and Slowmo Guys collab!!! 🤩
Every time you explode a ball bearing with intense pressure, you create a tiny universe.
Ah, a ball bearing video. Must click.
The slow motion is awesome, but don’t go into debt over it.
This guy's quite the ball buster
Great efforts, thx!
This is crazy 😂 and super entertaining
"OK it's a bit harder......... (presses to max)..... VAT DA HELL!!!!!!!!" 🤣🤣🤣🤣🤣
Today is one of the very rare days that the h.p meet its match 😂
the shedding of the oxide layer is pretty cool
Have you ever tried freezing the tools? Like, the base plate and the crushing part??
Amazing, and yes many steel alloys increase strength when at lowe temperature.
Always fascinating. Always exciting no matter what the outcome. Thank you
Talk about a ball buster…I regret nothing
I love when he says "OK!!!"
What a development. Hot steel can be manipulated with force. Entirely amazing.
Do you think this guy goes through life looking at everything thinking “yeah. I could crush that”
Can we get thermal imaging while pressing? That would be helpful with slow motion and doing calculations on different materials. Awesome Videos as ALWAYS!
That slo mo footage was great!!! Def want to see more with that.
The return of the Stunt GoPro 📹🤓
Definitely deadly but a hell of a lot of fun!
It’s so nice to see high temperature oxidation in its purest form
the cryogenic hardening made it waaay stronger
Ahh, excellent way to start the afternoon ;D
"some big ass bearing balls" im dying
I'm surprised Hollywood hasn't called you to render some cool explosions for them.
Liked and subscribed because I appreciate the slow Mo, awesome to see the heat when the explosion happens. Would love a video with the press channel and slow Mo Guys, dan and gav with you would be an amazing colab if you did some awesome videos like the paper or cards, ball bearings or any other interesting presses
Very nice pink and yellow nails. Lovely display of ball bearings!
Damn 130tons and that ball laughed in your face🤯
i think the balls dont explode as easily at higher force, because as the force increases, the ball is making bigger dent in the tool, however bigger dent means bigger area and the stress is distributed more evenly on the ball. Harder tool would definitely make it easier to crush the balls. Making it all out of very strong steel might be expensive, so i suggest using only metal plate at the end of the tool
I happy with what you do and have no complaints
Let's take a moment for the balls that were sacrificed for a Nobel purpose