3.7v to 12v boost converter circuit
HTML-код
- Опубликовано: 22 сен 2024
- #boostconverter
#stepup
#dctodc
#dcbooster
how to make dc to dc boost converter circuit
how to make a 3.7v to 12v booster converter
3.7 volt to 12 volt stepup boost converter
how to convert 3.7 volt to 12 volt
how to boost 3.7 volt to 12 volt
dc to dc stepup boost converter
dc to dc stepup module
3.7 volt to 12 volt boost Converter Circuit
3.7v to 12v stepup boost converter circuit
In this video I'm showing you that how to make a best and 100% working 3.7v to 12v dc to dc stepup boost converter circuit using NPN Power Transistor TIP41C with ferrite spool coil by winding 24-guage enamel coated wire 20-Turns primary & 20-Turns Secondary with loop at center and also used some other components,
👉You can download circuit diagram
drive.google.c...
Also Watch Other Videos 😍
How to make Mini Inverter | DC to AC 1.5v-220v
👉 • Mini Inverter 1.5V to ...
How To Make 12-Channel Bluetooth controlled switch using Arduino Nano
👉 • Video
How to make 12v battery Fast Charger
👉 • 12v battery charger ci...
How to make dc to dc boost converter | voltage doubler
👉 • how to make voltage do...
How to make solar power bank at home
👉 • Video
How to Make USB Soldering Iron Using Pencil
👉 • Video
Music Credits
Music: Whenever
Musician: LiQWYD
Really superb and working project 👍
Thanks bro
Hola boa tarde muito bom pode me dizer quantas horas é a durabilidade da bateria nesse circuito?
I have confidence in your videos. No fake ones. Thank you
Thankyou so much for appreciating
You are welcome
Very good
Thankyou so much
very good. Thank you
Thanks for appreciating 👍
how long time led can light up..thanks
Thanks sir ur the best
Thanks for appreciating
Don't forget to subscribe and check my channel and watch all interesting videos
Well done boss👍🏻🔥
Thankyou
Ando your video doesn't Say, it's that Annie BD fits as a winding for the derrite core You used
Can use mosfet
Hi, please how to make this coil. Help me. Thanks you for this video.
Dear Sir, may I know how to do the ferrite spool coil by winding 24-guage enamel coated wire 20-Turns primary & 20-Turns Secondary with loop at center?
I can send you video of this contact me on whatsapp +91 9596386458
@@CreativeTechos Thank you Sir. Can you upload it in RUclips so that everyone can learn from you?
Then please wait for next boost converter video I'll also show how to make coil in that video
@@CreativeTechos Okay please do that. Thanks
@@CreativeTechos v
Can we use 2 sperate inductor coils. With 2/2 connection.or it is necessary to connect one coil with 4 connection
Its not two inductors, its center tapped inductor coil wound on ferrite core spool.
Please watch video
@@CreativeTechos today i experienced that .you are right .it must b center taping.
Not working two saprate coils.mosfit became heat up.
And when i connect center taping one coil with 2 taping.than its working perfectly
Best of luck 👍
@@CreativeTechos one more thing is important to explain.
That . Coil taping is must clockwise and anticlockwise as same as one side turn and other. For example 19 turn clockwise and 19 turn anticlockwise.
Anticlockwise connect to mosfet gate.
20-30 turns clockwise then center tap then again clockwise
This video is not fake thenks
Thanks for watching my friend 🙂
कोई भी ट्रांजिस्टर लेने से चलेगा क्या
Hi . What is the max current value in the circuit?
Max output current 500ma
how can i increase the current to 2 amps
@@CreativeTechos
Once i connect load voltage dropped down by 50%.
Any solution possible ?
As circuit is very basic without feedback voltage stabilization, I'll soon upload with this feature too.
Ok, thanks
My pleasure, Thanks for watching 🙂
Will 25v 220uF capacitor work too?
Is it an air core or ferrite core???
Ferrite core used as in video.
Nice video 👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿
Thanks👍
@@CreativeTechos apka WhatsApp number de do please 👍🏿
+91 9596386458
Great i will wattsspp u i hav with question
Ok sure
Muy bueno 👍👍
Nice👌
Thanks 😊
Bro circuit perfect hai
Par isme battrey charging option kaha hai
How many ampiyer
measurement of diode?
I need automotive circuit for obd2 DLC connector from 24 volt to 12 volt please I want to reduce the voltage from 24 volt to 12 volt
My wathsapp +51971242410
fácil tan solo puedes hacer con un transistor 7812
@@carlosfuentesalanoca4360 quieres decir regulador 7812, no en lo mismo que un transistor.
NAMSTE SIR KYA 12V KI JAGAH 5 SE 7 V KA BOOSTER BANA SAKTE HE KOI VIDEO HO TO SEND KARNE KI KUPA KARE
Yes simply use 5-7v zener diode instead of 12v that I used in video to stabilize voltage at 5-7v
how can I use this circuit to boost 48v to about 90v?
That needs requires different circuit.
Please provide 12 volt, 5 amp bike battery charger with auto cut off circuit
Omg
Why only TIP41C transistor?
Actually it works an oscillator to boost the voltage
Thanks for reply.
But I wanna know, do we have another transistor option?
@@CreativeTechos Thanks for response.
But I wanna know, do we have another transistor option?
Yes you can use any NPN power transistor, but take note of pin configuration
@@CreativeTechos ok, thanks 🙏
coil ka material kia he
It us copper enamel coated magnet wire, you can use it on ferrite core or spool.
How make 12V to 24V plz reply
Different circuit need soon I'll upload video to convert 12-50v adjustable with 5a output
Cai muito a tensão, com carga
Am getting 30v why?
Use 12v zener diode to set it for 12v
@@CreativeTechos have done that stil 30v
Sourceet dyagram in the thumbnail
ZENER DİODE code please ??
12v1
@@CreativeTechos thanks
Most welcome
PL
3.2 v Battery charger auto cutof 10amps
3.2v @ 10A for which battery it must be 3.7v huge battery?
This would be very inneffecient
No, it provides efficient current as power transistor is used
@@CreativeTechos Im trying it right now, Ive tried it before but with a huge transformer(used as an inductor) the result is very inneffecient.
Don't use transformer as inductor it will drop all current, use 24guage wire with 30 & 30 turns on inductor with loop at centre, and use TIP41C Power transistor to get High power.
What circuit can you recommend to boost 48v to average of 90v?
very good