Hey Tarmo, as of today (I’m not even going to mention the name of a certain Canadian channel) you have a loyal fan base in the uk, good luck with the contract from a better team than orbea that will certainly be in the post soon, this is going to work well for you man, Happy Christmas from the uk.
Awsome video - it's art in it's finest form.... QQ - did you use the 30mm Diety Stem or the 50mm stem? Also what was the size of the three spacers fitted (3:20) ? Does anyone have any ideas on the total size of the stem rise?
Hey man, i have a quick question. I run a chris king bearing on my enduro, and its starting to move around in my cup. Do i need to run the FSA bearings on my enduro? I see that you put it on this bike in particular. Thanks
Are you talking about the headset? If so, if you have movement there, then you need to loosen the stem and tighten everything up. Make sure your stem cap / spacer sits at least 3mm above the steerer tube so that when you tighten the headset cap it tighens down on everyhing keep it snug. If this is not snug, your headset / steerer tube will knock around
@@ShreddingBliss many thanks. Theres some light builds quoted out there but I think they are a bit optimistic given the platform. I am hoping a lighter wheel set and tyres will yield a 14.5ish build for when I need to do all day pedals
one of the most calming videos I've watched
Wow, thanks so much 🙏🏻
Beautiful bike and film! Looking forward to seeing it flying through the forests of Finland! 🌲 ⚡️
There may be a shredding video coming with this steed in action! Just need some dry dirt 😅
Beautiful Craftsmanship. Appreciate the build .
Tarppe on 💎 ja uuh onhan toi ny herkku pyörä 🥰
Very nice bike!!
Top bike💯👍👍😍
Hey Tarmo, as of today (I’m not even going to mention the name of a certain Canadian channel) you have a loyal fan base in the uk, good luck with the contract from a better team than orbea that will certainly be in the post soon, this is going to work well for you man, Happy Christmas from the uk.
100% !!!!!!!
👏🏼👏🏼👏🏼
Awsome video - it's art in it's finest form....
QQ - did you use the 30mm Diety Stem or the 50mm stem?
Also what was the size of the three spacers fitted (3:20) ?
Does anyone have any ideas on the total size of the stem rise?
Parktoolin sininen rasvaruisku on niin cool!
Joo! Mun pajasta löytyy sama kans 👌🏼
@5:40 I believe the Brake caliper bolt washers orientation is wrong ?
Tää oli kyl tunteella ja taidolla tehty video👍🏻 Vähä niinkuin Juhla Mokka.
🤔 kiva kuulla 🙏🏻
Hey man, i have a quick question. I run a chris king bearing on my enduro, and its starting to move around in my cup. Do i need to run the FSA bearings on my enduro? I see that you put it on this bike in particular. Thanks
Are you talking about the headset? If so, if you have movement there, then you need to loosen the stem and tighten everything up. Make sure your stem cap / spacer sits at least 3mm above the steerer tube so that when you tighten the headset cap it tighens down on everyhing keep it snug. If this is not snug, your headset / steerer tube will knock around
Nice build.
Is the serial number only on the stickers or is there another place on the bike? Possibly laminated into the frame, non removable?
Friend of mine bought it used, and we cant find the SN.stickers have been removed…
I wish i could have that bike 😥
Very nice but a bit thrifty on the grease if I may say.
Did you use the included fsa headset?
I am not 100% sure, whatever is stock on this S-Works Enduro (the builder would know, as it's his Bike)
whats build weight?
With DH tyres etc it’s a little over 16kg
@@ShreddingBliss many thanks. Theres some light builds quoted out there but I think they are a bit optimistic given the platform. I am hoping a lighter wheel set and tyres will yield a 14.5ish build for when I need to do all day pedals
From where country is this so that i can build in your shop same of this bike
Helsinki, Finland!
Why was the intro so aggressive😭
It was a contribution to the builder in the video who is an insanely talented young gun who’s now killing it in the EWS! 🙌🏻
dude don’t use a torque wrench😂
He’s got the magic touch! 😃
Bruh that antler tho 🤮
Antler? Did a deer make it’s way into the video? 😳😂
Really dude. U dont need a mask on.You wont give ur bike covid
Really a face dipper? What has this world come to.
It was shot in an LBS and in accordance with their rules.