The 2 locks must be inserted up to the stop as otherwise the limit switch located 9n the inside will not be acuated and machine cannot be started. CAN YOU EXPLAIN THIS PLEASE?
the stop button is not well located it should be placed above or to add an emergency button .... When i'm using the planer the end is more planed cause to the weight of the piece of wood do you have some tricks to avoid this .
Never put your hands above the blades, NEVER. Just push the piece from behind and pull it from the front. This machine can chew your fingers in 0,01 seconds.
My cousin worked in a knife industry and was the macanic, one time doing a frame used um of this machines but like 3 times bigger blade, ripped all 5 points of the right hand, bone and stuff awfull job, must be careful all the time
The 2 locks must be inserted up to the stop as otherwise the limit switch located 9n the inside will not be acuated and machine cannot be started. CAN YOU EXPLAIN THIS PLEASE?
I figured it out, the sawdust collector (black plastic) must be connected otherwise the machine won't work. Safety feature.
Jesus... I'm having nightmares watching you push that board over the planer!!!
the stop button is not well located it should be placed above or to add an emergency button ....
When i'm using the planer the end is more planed cause to the weight of the piece of wood do you have some tricks to avoid this .
Never put your hands above the blades, NEVER. Just push the piece from behind and pull it from the front. This machine can chew your fingers in 0,01 seconds.
Thanks for advise. I'll keep that in mind.
And never run it without the Bridge guard in place.
Never put your hand over a planner blade like that! Incredible risk - one slip and your fingers would be ripped. That's what a push stick is for.
My cousin worked in a knife industry and was the macanic, one time doing a frame used um of this machines but like 3 times bigger blade, ripped all 5 points of the right hand, bone and stuff awfull job, must be careful all the time
Also, you should never run it without the Bridge guard in place.
nice ! I'm the type of person that will notice the act or dog hair on you sleeve .. haha thanks for the video.. I'm thinking of buying one as a DIYer.
Haha. You're a good observer :) Greetings from me and my dog Gordon :)
¿Did you find a solution for the problem of the thinner ends? I got mine today and have the same problem as you
The best solution is extend table.
But I'm trying to lift up outgoing end. It will reduce thinner ends.
is the motor brushless
I didn't check, but I don't think so.
I want to buy the same model... is it god? Not for profesional use...for hobi... thanks in front 😊
Buen vídeo 👌👍💯👋👋
Good device, wrong use. You must stay back of the machine not by side, cose you do not have control of wood piece. Be carefull!
It was my first time 😉 I'll keep in mind your advice
Dónde puede comprarla en España? Hay disponibles??? Gracias
Quanto costa
no se ven bien los anclajes del costado de escuadra, debería estar un poco mas en alto para poder verlo bien
Dog hair all over yer and as for sawdust and chippings hardly any. I get more wood over the floor sharpening a pencil.
Il prezzo
Ras le bol de l’ouverture de la boîte ! J’ai arrêté cette vidéo insupportable
Sabe si la venden en españa
En la cadena de tiendas Lidl
Hace tiempo q la busco en lidl y aqui en españa no la ponen a la venta.
No te las recomiendo, la calidad es bastante baja. Yo compre una y sin utilizarla ya la estoy devolviendo.
No merece la pena aunque cueste menos,es malísima almenos la mía.
Je n'en pas
Que le début est catastrophique ! 5 minutes pour ouvrir la boîte ! J’ai zappé ! 0/10 Titre de cette vidéo : comment ouvrir une boîte Parkside!