I've tried speedbox 1.0 and had twice error 524 and limp mode with smart system. Bought the speedfun evo+ after reading good comments from users. I've done over 1500km with it and no problems for now. I don't use the flow app nor do updates, they are useless. It seems the updates are causing errors cause the smart system is getting smarter than the speedbox.
Nice Vid, thanks! Only one question: I haven't any bosch screen, I use led remote with wireless bosch mobile holder. I use the flow app's ride screen. Could you use the flow app without broke the guarantee? Certainly, I don't want to use update functions.
My (Canadian purchased) 2022 SCOTT Strike eRIDE 920 has the BOSCH Performance Line CX GEN-4 , which has 5 plugs all with wires going into them .Only 1 of the plorts don't have a wite plugget into it. Is there some other product or adapter that I'd require to make this work?
After 90 minutes of mandatory punishment cycling from bosch "thou shalt not tune thy ebike" I ordered this one. Speedbox 1.0 is hopeless. Hopefully it will work. Don't have limb mode with this tuning yet?
i spoke to volspeed, it is possible, the connector on my bosch gen 3 had multi coloured connectors, the magnet on the spoke is not a problem, its the sensor on the rim that isn't compatible. Managed to raise the limiter.@@powerbikesbg
Have you experienced any issues? I tried a speedbox on my Smart system and went to error pretty quick trying to upload new Flow smart app ! , was advised not to use it as it is not happy with the "Bosch Smart system" and after 3 Manipulation errors the Warranty for the motor will be Void. you experienced any problems ? with this Speedfun chip with Smart ? can you still work with FLOW app and use updates etc..? thanks.
I've tried speedbox 1.0 and had twice error 524 and limp mode with smart system. Bought the speedfun evo+ after reading good comments from users. I've done over 1500km with it and no problems for now. I don't use the flow app nor do updates, they are useless. It seems the updates are causing errors cause the smart system is getting smarter than the speedbox.
Do you use kiox 300 with it or removed?
I use the Kiox 300 but the speed is not correct, nor the mileage. +3500km since and no issues, very glad of my purchase.
@@steves365
Perfect
Is it still working good? Same happened to me with speedbox 1.0 so I don’t know if I should buy this instead?
@@steves365can use it with or without it!
Nice Vid, thanks!
Only one question:
I haven't any bosch screen, I use led remote with wireless bosch mobile holder. I use the flow app's ride screen.
Could you use the flow app without broke the guarantee? Certainly, I don't want to use update functions.
Hi out of all the chips u review which one would u use personally or think is the best for Bosch smart system
Can you still customize the performance of the modes(eco, turbo, etc)?
My (Canadian purchased) 2022 SCOTT Strike eRIDE 920 has the BOSCH Performance Line CX GEN-4 , which has 5 plugs all with wires going into them .Only 1 of the plorts don't have a wite plugget into it. Is there some other product or adapter that I'd require to make this work?
Thanks for sharing!
Would you recommend it once you’ve already tried other brands? Did you have any issues like error with this chip?
Cheers!
🙏
Hi, no errors with this tuning! Best price on the market!
After 90 minutes of mandatory punishment cycling from bosch "thou shalt not tune thy ebike" I ordered this one. Speedbox 1.0 is hopeless. Hopefully it will work. Don't have limb mode with this tuning yet?
No problems! Perfect tuning!
Can you set a max speed with box? Its really cheap compared to the VolSpeed box (which has more options...).
You can not set anyting on this tuning!
What generation is your bosch bike my is generation 3 and i have rim magnet i dont think this chip will work on my ebike
Does your bike have a magnet on the wheel?
Yes, not on the valve!
My bosch has a magnet on the spoke. But i opened mine up and it has no grey speed sensor connector...i'm guessing i cannot the volspeed one?
Yes, no way to tune it😢
i spoke to volspeed, it is possible, the connector on my bosch gen 3 had multi coloured connectors, the magnet on the spoke is not a problem, its the sensor on the rim that isn't compatible. Managed to raise the limiter.@@powerbikesbg
@@MrPiePlaysgood for you..not posible for Smart System with a valve sensor so far
What does the Speedo read at say 10 mph? And I guess the mileage will be incorrect with this one to?
18 - 20 km.h. and than stops...
@@powerbikesbg so the Speedo always reads in correct even below the speed restriction limit?
@@rogerfrean6432 the speedo reads till 18 - 20 km. h. and I beleave it is correct
Have you experienced any issues?
I tried a speedbox on my Smart system and went to error pretty quick trying to upload new Flow smart app ! , was advised not to use it as it is not happy with the "Bosch Smart system" and after 3 Manipulation errors the Warranty for the motor will be Void.
you experienced any problems ? with this Speedfun chip with Smart ?
can you still work with FLOW app and use updates etc..?
thanks.
Don’t use eFlow app!
No problems so far!
Can I ask if this kind of chip is helping little bit also to make less effort in the climb ? Thank you
No it won't because it doesnt add power to the engine, it just cuts the limiter.
i have a levo specialized, could work with this? how may i order?
works only for Bosch
@@powerbikesbgdoes this speed fast 35 km after upgrade good?
@@Giuseppe_Morabito 45 km/h is the speed limit after this upgrade
Can i use this with a Rim-Magnet?
if i take it off only speed sensor my ebike go faster or not ?
No, and the bike will stop also!
with the same control unit it gives me the error 524001 even though I have the Bosch performance line cx engine
after 2 months... still no errors?
Perfect
Hello where can I buy it please ? Thanks