CNC Router Speed Dial Fix in 5min! - No parts replaced

Easy 5min DIY fix for your Makite router speed dial without replacing any parts or adding any 3D-printed parts. No more masking tape or wedging all sorts of things to keep it in place.
Video to watch next:
• Mobile Machine Base Fo...
Chapters:
0:00 - Intro
0:28 - Safety First
0:34 - Remove Router
0:38 - Remove screws to back cover
0:54 - This is what we want to get to
1:10 - Test fit and mark felt pad
1:51 - Put everything back together
This is the router I use on my Onefinity CNC: amzn.to/45VqGIk
These are the felt pads I used: amzn.to/3PyTz7v
Other Tools I Often Use:
Makita 18V Brushless Drill XPH12Z - amzn.to/45UXjWu
Makita 18V jigsaw - amzn.to/42CElS0
RZ Dust Mask M2.5 - amzn.to/45VrCfO
Neiko 02638A 5" Automatic Center Hole Punch - amzn.to/3MtHaP4
Kreg Tool Pocket-Hole Jig 720PRO Promo Kit - Complete with the Clamp I use: amzn.to/45W9x1t
Chapters

[@TwinSummitDesigns]

I know there are numerous ways to fix this particular issue and I have tried a couple of them with masking tape being the most reliable option for me. This quick fix obviously removes the need to wedge anything between the cover and the speed dial which I assume might worsen the issue over time. Please feel free to leave a comment if you found another good way to fix this issue. Thanks for watching!

[@cncgogo905]

I've seen this problem on a large shop fan. Nice solution.

[@TwinSummitDesigns]

Yep, I think it’s a part found on a lot of different machines. All the same. Should work there as well.

[@petenewhall511]

Great solution, thank you for sharing! Morning project in the bag...

[@TwinSummitDesigns]

You are welcome! Mine is still running 100% without issues since I posted this video.

[@billstauffer4304]

I've not experienced this problem yet, but it sure is nice to know of a quick fix when it happens.

[@TwinSummitDesigns]

Funny that, Bill because I have not either till fairly recently. I have seen a lot of chat on the Onefinity forum on this one and a bunch of ways to fix it on RUclips. This works very well and is easy to do. Thanks for the comment by the way!

[@MarkLasbyCNC]

Brilliant innovative solution

[@TwinSummitDesigns]

You are welcome!

[@alinmarianbalasa9331]

🙇🏼thank you, man.

[@TwinSummitDesigns]

You are welcome! :)

[@peterward8776]

Excellent nice and neat

[@TwinSummitDesigns]

You are welcome!

[@berrie2981]

🌷 'Promo sm'