Thanks for the video! I just installed a Aem x series 60 psi. Brand new out of box. Just installed and getting SEnS msg. Pretty annoyed can't see it being issues with the sensor. Any ideas?
I just installed my boost gauge and it reads 1.8 psi when the engine is off. I’m at 830ft above sea level. During peak acceleration, I’m getting 29.7psi which is wayyy about the stock boost level of 23psi peak then tapering off to 17 or so psi (I’m stock, evos don’t come with boost gauges). I placed the T right off of the intake manifold where most people place them for the Evo X. Is my sensor bad? It seems to read vacuum okay when the engine is on.
So I got 1.71v between the green wire and a ground place in the engine bay. The gauge is saying 2.1psi. This is all with the engine off and ignition on.
I know this is old, but just installed my boost gauge n only has 3 - - - marks, tested voltage at sensor and theres nothing, do i have a defective gauge? aem 30-4406
Note: just because the sensor reads correct atmospheric pressure doesn't mean the sensor is good. We just did this test with the right values and the sensor was still bad!
Thanks for the video!
I just installed a Aem x series 60 psi. Brand new out of box. Just installed and getting SEnS msg.
Pretty annoyed can't see it being issues with the sensor. Any ideas?
I just installed my boost gauge and it reads 1.8 psi when the engine is off. I’m at 830ft above sea level. During peak acceleration, I’m getting 29.7psi which is wayyy about the stock boost level of 23psi peak then tapering off to 17 or so psi (I’m stock, evos don’t come with boost gauges). I placed the T right off of the intake manifold where most people place them for the Evo X. Is my sensor bad? It seems to read vacuum okay when the engine is on.
So I got 1.71v between the green wire and a ground place in the engine bay. The gauge is saying 2.1psi. This is all with the engine off and ignition on.
I know this is old, but just installed my boost gauge n only has 3 - - - marks, tested voltage at sensor and theres nothing, do i have a defective gauge? aem 30-4406
Same thing here man. Did you figure this out? Was it bad?
@@MooneysExcavating my gauge was bad
douglas mccambridge I’m probably going to switch my buddies out to test it. Was worried maybe it’s the sensor :/
@@MooneysExcavatingupdate on this? Mine is doing the exact same
Thanx a lot !
Note: just because the sensor reads correct atmospheric pressure doesn't mean the sensor is good. We just did this test with the right values and the sensor was still bad!