I’m building my ft scout xl and want to use your files. I found them on thingiverse but not sure how the tail dragger is installed or what the support piece is for. Thnx!
In the STL files, the "Tail Blade 2" part needs to be glued into the bottom of the "Tail Blade" using CA glue. You then hot glue that assembly into the bottom of the tail of the fuselage. There should be a cut-out for it already if you are using the pre-cut kit or plans. If not, just cut a small rectangle. The "Support" part goes between the barrels of the machine gun and the fuselage. See the pic at 4:31. Hope this helps!
I like how you show the specs at the beginning! Gives one more information what to expect and what works... thanks so much for sharing!
I really appreciate the feedback! Glad you found it useful.
Great job. What a beautiful looking and flying model.
Absolutely beautiful job ! 😉🙃😎 NZ
Beautiful job !!! 😉🙃😎 NZ
Nice job! Looking at Thingiverse I don't see the STLs for the engines that mount on the sides of the fuselage. Are they missing?
They are there. Please click the "Files" section. It is listed as "Cover1.STL".
Awesome. Thanks for sharing the files.
I’m building my ft scout xl and want to use your files. I found them on thingiverse but not sure how the tail dragger is installed or what the support piece is for. Thnx!
In the STL files, the "Tail Blade 2" part needs to be glued into the bottom of the "Tail Blade" using CA glue. You then hot glue that assembly into the bottom of the tail of the fuselage. There should be a cut-out for it already if you are using the pre-cut kit or plans. If not, just cut a small rectangle. The "Support" part goes between the barrels of the machine gun and the fuselage. See the pic at 4:31. Hope this helps!