Apply for Rhino for Architects Training ✔ howtorhino.com/apply Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/40265835 RUclips Tutorial + Project Files 👉 www.patreon.com/posts/40265932 Free How to Rhino Community 👉 www.skool.com/howtorhino
i do evrerything like you do but at the esxpression show me error 1. Parameter "Variable x" has an invalid name. Only use alphanumeric characters and don't start with a number.
Thank you! If you're interested in having a structured approach in learning Rhino and Grasshopper, you might want to check out our Rhino for Architects 2.0 course. You can reach out at dusan@howtorhino.com and I'll tell you some more about it! :)
Hi there, hopefully you still read these comments, but I was wondering if you would know why upon evaluating the curve at around 7:21, why would by points go out too far ?
@@HowtoRhino yes i reparametrize and I've rewatched the earlier parts to make sure that i didn't miss anything, and another issue arise while trying on a different file haha, as for the second issue when I'm doing it on a different file, the "Curve" in front of the expression "Contains (x,"Arc")" it stats that the data conversion failed from point to curve. haha But I would like to solve the initial issue first haha
I would recommend you to visit our Patreon page where you can download the project file. Once you have the file you will be able to compare the result with the file that you currently have. I hope you will able to identify and resolve the issues. However, if you are still having trouble figuring out the cause of the issue, feel free to DM us on Patreon and we will assist you to resolve the issue.
Around the last parts, where we make two lofts after flip matrix, the one for corner sweeps works perfectly but the one that creates the panels (coming from dispatch node B section) gives an error "1. Solution exception:Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index" do you know why would it be like that?
In case you're still wondering - This is because the "line-like curves" at the very top are null. Curve coming from dispatch node B is 316 values, but should be 320. Change the domain from 0.08 to 0.09 or higher to make a gap and allow those straight curves to be created. You should then be able to loft.
Hey Vikkie, Thanks Glad you like the tutorial! If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! Please reach out and send me an email at dusan@howtorhino.com if you're interested and I'll tell you a lot more about it there and share the course platform with you as well! Cheers! :)
Apply for Rhino for Architects Training ✔ howtorhino.com/apply
Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/40265835
RUclips Tutorial + Project Files 👉 www.patreon.com/posts/40265932
Free How to Rhino Community 👉 www.skool.com/howtorhino
Hi! When I input the panel from GraphMapper into Remap Numbers, there is an error in the scale component and it turns red. How can I fix this?
At the moment of connecting the curve to the flip matrix 10:54 it launches an error: 1. All paths may only differ at a single locus. Plz someone help.
Gracias, muy buen tutorial
how to input the "expression"? coz mine have to input both x and y instead of only x
You need to zoom closer to the "expression" component and click on the minus symbol next to "y" input.
i do evrerything like you do but at the esxpression show me error
1. Parameter "Variable x" has an invalid name. Only use alphanumeric characters and don't start with a number.
Hi Andreas, please send me a screenshot at lazar@howtorhino.com and I will try to fix the error
Instead of variable x, just call it 'x'. Then go to the solution menu and recompute.
@@wacc1115 it work. thanx
@@wacc1115 I have the same problem can u help me please?
@@sabirmkh6121 Hi Sabir, you should uncheck the "Display Full Names" option in Display Tab. Once you uncheck, it should work.
Thanx
Super cool
We're glad you like it
I love your channel man ❤ ..but i got lost without you narrating :/
Thank you! If you're interested in having a structured approach in learning Rhino and Grasshopper, you might want to check out our Rhino for Architects 2.0 course. You can reach out at dusan@howtorhino.com and I'll tell you some more about it! :)
What is the 7ms down the expression min 10:29
gracias buen video, cómo haces la malla envolvente de al final?
hello, I'm not sure how to write the input for the pattern on the wave. when I use a panel and enter 0 0 1 1 the wave turns red.
Hi Immanuel! Don't forget to uncheck "Multiline Data" once you go right-click on the panel.
Hi there, hopefully you still read these comments, but I was wondering if you would know why upon evaluating the curve at around 7:21, why would by points go out too far ?
Did you reparametrize curve within Evaluate Curve component?
@@HowtoRhino yes i reparametrize and I've rewatched the earlier parts to make sure that i didn't miss anything,
and another issue arise while trying on a different file haha,
as for the second issue when I'm doing it on a different file, the "Curve" in front of the expression "Contains (x,"Arc")" it stats that the data conversion failed from point to curve. haha
But I would like to solve the initial issue first haha
I would recommend you to visit our Patreon page where you can download the project file. Once you have the file you will be able to compare the result with the file that you currently have. I hope you will able to identify and resolve the issues. However, if you are still having trouble figuring out the cause of the issue, feel free to DM us on Patreon and we will assist you to resolve the issue.
Thanks a lot but can you remodel "Mariners Cove Towers in Australia by Zaha Hadid " in grasshopper in your next tutorial, please?
Do you have to make the script yourself ?
Around the last parts, where we make two lofts after flip matrix, the one for corner sweeps works perfectly but the one that creates the panels (coming from dispatch node B section) gives an error "1. Solution exception:Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index" do you know why would it be like that?
In case you're still wondering - This is because the "line-like curves" at the very top are null. Curve coming from dispatch node B is 316 values, but should be 320. Change the domain from 0.08 to 0.09 or higher to make a gap and allow those straight curves to be created. You should then be able to loft.
@@emem2691 thanks a lot, i came up with a similar solution later, but will try this one too :)
I have the same error but i can't solve it even when I increase the domain start value. Idk whats wrong. Do you guys have any idea why???
dude you have to reduce the fillet number size
Nice, but were some text explain how things works?
Unfortunately, this video doesn’t include a voiceover. If you’re looking for tutorials that do, feel free to check our other videos.
Appreciate this video. i wonder if you can demonstrate how one thousand museum is scripted ):
Hey Vikkie,
Thanks Glad you like the tutorial!
If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! Please reach out and send me an email at dusan@howtorhino.com if you're interested and I'll tell you a lot more about it there and share the course platform with you as well! Cheers! :)
Thanks a lot bro~~^^b
You're welcome bro 😀
I'm too beginner for this. Couldn't catch up with the speed 🥺