fischer Injection mortar FIS P Plus
HTML-код
- Опубликовано: 2 окт 2024
- The mortar for anchors in masonry guarantees security in virtually any application. FIS P Plus has approved high load values for all applications and is therefore often used. Look and see!
Interested? Then visit us at
www.fischer.de. - Наука
For solid brick how do i know how much of the product I have injected - it's not like i can see inside the hole as i inject the mortar like in the the video - in reality and practicality, I would need to know that i have injected enough, but if i inject too much i guess it's just wasteful and not a problem unless i run short for all the holes?
Hi Frederick, the general recommendation is to fill the hole 2/3rds full. When inserting the threaded rod , with a twist to ensure there is no air in the resin, you should
always see resin come up to the surface. Hope that helps, if you need anymore advice please call us on 01491 827 922
+fischer .fixings thanks for reply. My problem was knowing when it's partly full so I went all the way.
BTW, I live in the Netherlands - could not find extra mixing spouts/nozzles from the Gamma (store). Packs of two would be handy .. FYI.
Hi,how do i use this product on a hollow brick?
Após utilizar o produto e não gastando tudo, por quanto tempo posso guardar para usar novamente em outra ocasião?
Prise Kya hai
Online available hai
Please send online dilar contect number
Pure cement with water