Ascend 133x | Mercury 6hp | Waterway testing!!! | Maiden Voyage!!
HTML-код
- Опубликовано: 26 авг 2024
- Was an exciting day to get it tested. Was a little upset that I had a limited amount of time to take it out on the water. I know where it needs to be strengthened and weak points that need to be addressed.
Thanks for tuning in!
Steering control: 7ft cable version
www.amazon.com...
Tilt tube setup:
www.amazon.com...
Something to note. Pull up your trolling motor it causes alot of drag if you ever try to go WOT potentially you can damage the shaft.
First of all, your a badass DIY! Excellent mods, great to see folks pushing the limits. You may wanna consider adding some kind of weight...like a long weighted keel, or maybe some outriggers for stability. The flex in the rear: consider an aluminum plate instead of the plastic/ABS motor mount. Run the dimensions of the new plate forward along the gunnels for more mounting surface. Also, maybe consider a bed mounted loader instead of a trailer. That way the loader is still easily removable and storable and you dont run into parking problems. Keep it going.
Thanks!! Yea, the platform has quite the potential. Been really busy getting used to my new work schedule. Trying to get another video out soon!
Man alot of good game in this comment thanks!
Finally! The moment we've all been waiting for!!! Thing looks great on the water! Def going to be referring back to all your videos when I start my build
Yea I know right! Been waiting for months for this day! Yea man any info I didn’t touch on feel free to ask I’ll help anyway I can
Great work Juan! Love how your little boat moves. Hope to see you soon.
The outboard rocks!
You should lower the seat to help you be more stable. Hobie has that problem. I am thinking of doing one also . I will be putting foam to stabilize the floor and rear tank well. Lower the seat that will help on your stability. I worked at a kayak shop did many kayaks. I was one of the first to do out boards lol.
Definitely pull that trolling motor up or you’ll have a bend shaft. Been there and done that few times on my jet boat
When you strap it down and say. "Thats not going anywhere" you know it's tight
Man awesome set up. Will look for more of your videos to see how you transformed into a boat :) and hope find some links on the parts you used.
Man your better than me a trailer would have been the first mod for me😂
BEATIFUL sound !!! Boat not for open water
I’m looking forward to your next video on your creative ideas keep up the great work
I’ve got a couple in the lineup, the more I use it the more I encounter things I can make it better 😁
@@thejuanderdude7911
Awesome I wanted to get the 133X to setup for bow fishing but I settled for the 12T instead I am still thinking about modifying a transom to mount a 2 stroke weed eater style mud motor setup I think would really turn out great
@@countryirishman2386 yea not bad, I did go a little extreme with the setup. In the end I just wanted reliability
@@thejuanderdude7911 reliability is the main key in modifying if you take your time and build it right it will last for a long time
@@countryirishman2386 exactly! Especially if your on the water.
NEVER MIND JUST SAW THE TITLE THANK YOU
Nice and yea you going to need a trailer for that monstrosity of a kayak lol
🤣
Great job bro I’ve been following this build
Much appreciated! Got a bunch of other stuff in the future that I want to do to it. Just hope it turns out the way I envisioned it. 🤪
Awesome! Was concerned that telling motor was going to hit something and snap in two though? Be careful out there. ♥️
The Gospel of John, when you're ready. 🔥
Hey man. Nice build. What kind of rear motor mount plate do you have on it for your outboard motor? Looks like the plate goes completely across the back of the kayak. Im interested in putting an outboard motor on my 133X.
Custom made from starboard 😁
What's the maximum speed you got with the outboard?
Don’t put a wing nut on there lol vibration and waves will make it back out and if you lose steering while you’re going wide open it’s going to be a problem bro.and a single jet ski trailer worked perfect for my kayak get them used pretty cheap that way you don’t have to take anything apart load and unload like a boat
As a veteran of various calamities involving boats and equipment failure I agree.
What’s the plate on the back and cable steering can I get the name of the plate and cable set and we’re to buy
In what fisherman's world is 15 mph "Extremely windy"
Mate nice set up ill have to get one but if your going to put a petrol motor on it just buy a tinny
A lot of motor for that light kayak. Haha
Haha I know! It actually handles well and tracks straight.
@@thejuanderdude7911 sweet
Badass setup!
You need a trailer.
I saw this thing at BP and looked sweet.
Hiw fast can you go with that 6hp at WOT?
Nice your like me you start out small and build on something love the outboard better than electric
Yes! Outboards will get you further!
Wingnut or trailer? Hm-m-m... Just hitch and go. You decide. Thoughts?
Hello, in the end, what happened with the kayak? Is everything going well? I plan to do the same as you. Do you think it's the best combination? Have you had any problems with the motor? 17:37 17:37
We no longer know anything about how your kayak is doing. Do you recommend that I do it the same as yours? Everything is going well because I like how you set it up. Please tell me something. Thank you.
Part of the flex is it is only rated for 3 hp so 6 is twice the rated amount.
How's the trolling motor doing in saltwater?
Dude that is so Rad
Thanks !!
God damn, I thought my kayak was heavy and a pain in the butt to load by hand to landings. That is a sick setup! I figured the shape of the keel, it doesn't cut through water that great? Didn't see you attach a kill switch, are you not required?
Yes I have a kill switch it’s off on my left on the throttle box. Yea the setup is a bit cumbersome. More then I anticipated.. 🤣
@@thejuanderdude7911 Lol, I get it. I eventually settled to get a modded used jetski trailer.
@@pywifishingandoutdoors yea I was looking into something similar
What is your overall take putting that 6HP on there? I have my eyes on a 5HP i think its 25 lbs... did it stress the hull? too much? thanks!
Can u insial 10 hp motor or even more?...thanks
Hello Juan, are you.in South Florida? I am a brand new owner of the 133x as is my buddy. We are looking to rig up Microsoft (nanoskiff)s like your is roughly. Do you have any recommendations or tips you would like to share
Hey Ricky, I’ve been modifying mine we should link up sometime and discuss mods Im in Miami.
Great video, been looking forward to it, maybe try the scupper plugs?
Yea I have some plugs they weren’t pressed in properly though some popped back out.
In northern waters, sure...but ain't NO WAY I'm going out on southern black water with that thang!
🍾 nice work
How does the title process work buying these from Bass Pro Shops?
How exciting.....NOt
My John yanks when shifting it’s normal you won’t eliminate all of it I thought she was amazing
I was really happy to find your RUclips channel. I'll be purchasing a 133x today or tomorrow, and like you, I want to have remote steering and control. Like you, I also will have stick steering to keep things out of the way (EZY-stik looks like what you have also). However, I have not been able to find anything about what it takes to get the tiller/throttle arm off and use it as the remote throttle/shifter. Yet, I see you appear to have done just that. How do I find on RUclips where you did that, or do you know of other sources? I'm looking at putting on a 4HP Tohatsu. I'd go with the 3.5 which is considerably lighter given it's only .5 horse less, but then I would not be able to add an alternator. It's good to have that electrical juice flowing for lights and trolling motor, etc. But, the weight issue may win out in the end. I could always add an alternator over the side that turns when the boat is moving. Please respond, and tell me where you are out of? Looks like Florida. I'm in Miami.
Did you end up getting it & modding it?
Where did you get that Transom-Mount? It looks super strong
Hey, you mentioned you worked on a number of the yacht club homes....what are the jobs you do for them?
If you don’t mind me asking, where is that kayak ramp located. Would love to paddle that waterway
That’s 🔥🔥
Things I've learnd.. the boat flexes too much without the hitch extender .. also if you are using ratchet straps dont stand in the kaya or put weight on it while cranking it down.. I always imagine my front skidplate being put under too much pressure. Aslo is this from Lauderdale..? I think recognized some of those houses
Yea I got a hitch extender on order. Should be here before the weekend. I cringed when I seen it hanging 8ft of the back of my truck 😂. Luckily where I launched it was only 5 min away.
Where did you get the outboard mount?
Hey I’ve been watching your videos and I have the same I want to know how you fabricated the mount for the outboard motor
I used starboard for the rear deck
How far does that motor get you on one tank of gas?
Hey brother what's the brand of kayak cart that you use to move it to the water I need suggestions for my own 133x.
It’s the Wilderness systems xl cart. It hold the weight great!
🔥🔥🔥
Hey man, sweet rig! Just curious, how did you get it registered? Homemade vessel?
Yea I had to register the kayak at the tag office. Anything motorized on the water requires it to be registered.
@@thejuanderdude7911 how. Much did it cost?
I fished out of kayak in Louisiana 15 + yrs. ago in simpler times ...I looks a lot more complicated now ..Seems like putting a rifle scope on blunderbuss --but interesting ...)))
HI NICE JOB WHAT SIZE MOTOR IS THAT
Do u have a link or tell me how to get that steering kit
No I couldn’t find the exact link because they don’t sell the kit with the short length cable that I have. But if you look up eZy glide stick steer it should pop up. Or did you mean the one mounted on the rear transom?
Bro I’d be gone insane with all that bullshit on my head
It’s actually not that bad 😂
I would not drive with the TM down way to much stress on the bow.
Yea I seen that. It spooked the hell outa me. It created way too much drag too. Once I do a couple of more mods I’ll take it way out to do a speed test
Did u put on the bilge yet
Not yet but the foam balls worked out. Been a lot of stuff going on past few weeks. Trying to get another video out.
What bracket did u use to mount outboard
I used a wilderness systems trolling motor mount
@@thejuanderdude7911 bad ass thanks what is that black material on top of the back of the kayak. Sorry for all the questions
@@alonzosepulveda6759 lol no worries, it’s starboard.
@@thejuanderdude7911 thanks. Did you just trace and cut it and what was used inside hull to back it up. Merry Christmas to you and yours .
@@alonzosepulveda6759 yea I did everything by eye and made a template
You've got a lot of unnecessary drag with your outboard down while you're not running it.
The Minnkota would go a lot faster with it up.
I don’t think that’s really important. Max I’ll get is 4mph. Not really in a race to go anywhere 😂
@@thejuanderdude7911 It's more of an efficiency thing really. It's like paying to fill up your jerry can and then dumping 1/3 of it out on the ground before you take off. You do you. I do like your setup though.
Man his is my dream boat ....is it cable steering
Dude that's legit about how fast is she
Unsure yet, ran into a slight issue Sunday when I took it out. You’ll see 😖
Hope u didn't turn it over I want one but I want a h bar mounted on it your set up I'd the ticket here in south Louisiana love to see u in a tournament
@@therod-father337 yea I thought about the H bar setup. It will definitely do justice on the kayak.
But It’s a whole other issue I encountered that I’m dealing with. I Think I have a solution to it it’s just I wanna test it out first make sure it’s functional and works which I’m sure it will.
Cool can't wait to see your video
Just looks like a huge hassle to me
Yep........Trailer
🤣 heading out again Sunday! We’ll see how it goes.
why not buy you a small jetski trailer or even a kayak trailer and safe your back
Yea I thought about that, I’ve got something in the works now 🤓
I didn’t see it but hope you have a kill switch otherwise very cool mods
That 6 hp should move it faster than that
Yea I had the trolling motor down and it flexed the deck where it was mounted. Too much drag
Wanting to go 4hp tohatsu
Yea they are the exact same as mercury. I think cheaper too
Do you have a fb I can show you what I did I run a suzuki 5hp on mine
I don’t have fb but you can message me on IG @The_Juanderdude
I rather put that 6hp on a hobie kayak PA 14
954?
Just on the border area of 954. 😉
I'm really not understanding the whole running the gas motor, with the trolling motor down thing, especially when you tried to hit the throttle some, thats just ridiculous.
My excitement got the best of me
@@thejuanderdude7911 lol, I understand that, that's an incredible boat man, I'm thinking maybe that's my next one.
Why don't you just buy a little flats skiff?
Started out with the kayak, then my ideas started going. I’m really trying to steer away from a trailer. But looking how it’s going I’ve already build one 🤣. The boat ramps close to me are always jam packed also and there’s a new “paddle craft” only launch 3 min from my house.
When I started this project I didn’t have enough for a skiff , didn’t want a loan so I just slowly built to this point. Plus storage space is an issue. But we’ll see what the future holds. I’m happy with this setup.
Fake Gator head remote 😅
And I thought the point of a kayak was to paddle and keep things simple , hmmmm.
Why keep things simple when they can be fun and complicated. 🤪
Overmotorized...
Not honestly trying to hate. But bro...seriously if you gonna use a gas powered motor, just get a bass boat. What I personally see is a fisherman with no actually died in the wool fishing skills. Just an observation. None of this shit exsited when I was taught to fish.All them damn gadgets and gizmos. Now, will you out fish me? Damn right! I'm not using all that!