Hi, your video was quite educative, thanks for the effort....I have an inquiry, I'd like to power a 12V relay using the pass light switch output...I intend to use the relay to close the NO & COM terminals as a pulse trigger for a secondary voltage free signal input device.....kindly advise
Thank you for all the work with so clear demonstration. I try to find the reason why Turn Signals (and Marking bulbs) stopped working. Hazards and everything else works. The fuse on Turn is good. I'm planning to replace the Headlights Switch, I've heard it might be worn wires on Turns. It is much easier to do diagnostic on the problem after this film. Thank you again. Update 1: I found it!! And what it was, I removed the headliner board for re[placing the upholstery on it, and disconnected the wire to the ceiling lens. The shop manual (I fortunately have for that car 2001 Saturn SL2) advised to attach those wires w/scotch tape, so I disconnected it fm/the plug by the rear window. The plug was sitting on a thin plate, which I assumed was there for keeping the plug in correct place. After I did some research I've learned that grounding could cause Turning Signals go off. The Manual showed 2 grounding wires on the rear close to that plug. There was a clip on the plug, metal one. I disconnected the grounding there, so even w/plug in the T S-ls didn't work of course. It might be helpful for someone else. Pls check the grounding as well if you have a problem w/T Signals and the fuse is fine. I was about to replace the Steering Column Switch, and actually ordered one already (so will have a spare now, not bad thing though). Update 2: Now everything is working w/that clip off or on, so it was not the ground connection, just a mounting clip. I'm completely lost and don't know what was the problem before. Maybe still the Steering Column Switch. The car was sitting for a long time, probably smth got corroded inside of that Switch and after several shifts back and force it is gone.
Idol, good day....very clear ang instructions. Keep up the good job.....naa ra ko question idol, unsaon pag.trace kung ang switch kay naay para fog lights? Unsoan pag.trace sa pins para sa foglights?
Ang pag trace sa connection pra sa fog light mao ra ang sa park light na paagi. E On ang switch then pangitaa ang my continuity na duha ka wire.Then tan awa ang Fog light tutorial video sa kani na yt channel.
Very informative tutorial,,sir,i would like to clarify the power supply line to be used on those switch,,is it really NEGATIVE POWER SOURCE?,,,thanks in advance for response❤
@@fjace thank you sir for response,,one more things sir,,what standard size of wire to be used on ignition system and light system?,,for D.I.Y purposes only sir,,i have an otj for rewiring,,,thank you very much and god blessed you sir❤
Hi , my left turn signal light does not reset (stop blinking). After I complete my turn). Do you have any ideas about what the defect is and how I can fix it please? Thx
There is a mechanism inside the combination switch that will automatically reset.Open it and fix.Sooon I will make a video related with that problem you encountered my friend.
Boss makapalit ba ta anang handle combination switch? Kanang naa sa manobila dool? Para sa 4d31 canter. Mayntag matubag salamat. New subscriber ko nimo boss
The best f naa ang daan sir mao e sample pra dali ra e taud.f wla ok ra bisan lain na combi switch importante ma fit sa steering column housing then mg add ka ug bracket f needed.
Sir unsay problema sa akong crosswind, ig on sa headlight kay mo apil ang wiper, nya kung e turn right kay mo blink ug apil ang headlight, na unsa kaha ni sir?
May problema cguro na imung ilawum sa combination switch sir.basin ma tandug ang mga mechanism inside f e switch na nimo.E try ug open sir pra ma check ug ma cleaning sad ang mga contact plates.
Sir pa tulong,pag park light lang ako,sabay din ung high beam naka on sa Xpander combination switch.pero pag turn on light ok na naman low beam.kaso hindi ma matay ung hi beam,ano po kaya problema don?
E try mo e open ang combi switch baka my problema sa mechanism inside.Soon mg apload ako video related sa combination switch servicing pra mas lalong maintindihan ng mga viewers kung ano ang nasa loob ng switch.
Sir unsay problema sa akong crosswind, ig on sa headlight kay mo apil ang wiper, nya kung e turn right kay mo blink ug apil ang headlight, na unsa kaha ni sir?
Thank u for ur effort sir ..
Hi, your video was quite educative, thanks for the effort....I have an inquiry, I'd like to power a 12V relay using the pass light switch output...I intend to use the relay to close the NO & COM terminals as a pulse trigger for a secondary voltage free signal input device.....kindly advise
Very good explanation! Greetings from the us
super informative thank you
You're welcome
Thank you for making this video! Very useful to help me understand how to troubleshoot my switch problems!!!
Great vid
Thank you for all the work with so clear demonstration. I try to find the reason why Turn Signals (and Marking bulbs) stopped working. Hazards and everything else works. The fuse on Turn is good. I'm planning to replace the Headlights Switch, I've heard it might be worn wires on Turns. It is much easier to do diagnostic on the problem after this film. Thank you again.
Update 1: I found it!! And what it was, I removed the headliner board for re[placing the upholstery on it, and disconnected the wire to the ceiling lens. The shop manual (I fortunately have for that car 2001 Saturn SL2) advised to attach those wires w/scotch tape, so I disconnected it fm/the plug by the rear window. The plug was sitting on a thin plate, which I assumed was there for keeping the plug in correct place. After I did some research I've learned that grounding could cause Turning Signals go off. The Manual showed 2 grounding wires on the rear close to that plug. There was a clip on the plug, metal one. I disconnected the grounding there, so even w/plug in the T S-ls didn't work of course. It might be helpful for someone else. Pls check the grounding as well if you have a problem w/T Signals and the fuse is fine. I was about to replace the Steering Column Switch, and actually ordered one already (so will have a spare now, not bad thing though).
Update 2: Now everything is working w/that clip off or on, so it was not the ground connection, just a mounting clip. I'm completely lost and don't know what was the problem before. Maybe still the Steering Column Switch. The car was sitting for a long time, probably smth got corroded inside of that Switch and after several shifts back and force it is gone.
Thank you very much my friend for appreciating my video and for coming.
@@TATGeneralServices My pleasure.
Galing nyo boss salamat sa sharing sa kaalaman
Thank you sir..mabuhay ka kabayan.nice tutorial.
daghang salamat master sa klareks kaayo nga tutorial,God bless.
Yun master galing nyo sir
Salamat sir sa pag bisita at pag appreciate sa video. Try mo ang bazard light panoorin sa channel namin.Keep up the good work.
This is good content bro
Excelente...
Clear juice
Thanks for the visit.
idol paano kung walang 12v supply ung wiring ng water pump saan ako mag tap ng wire para sumabay ang water pump spray sa wiper?
Pwede sa mismo supply ng wiper motor ka kukuha ng supply.Make sure na negative trigger ang washer motor switch during pag pull sa switch.
Salamat boss
Sir unsay supply sa.park light sa common sa headlight?
Ang supply sa park light is + then naka ( - ) ang trigger sa switch.Ang common sa head light is negative connection.
I would like to have this explained better in English
Naga general wiring ka sir L300? Ug asa dapit workshop nimo sir?
Mo general wiring me sir ug naa sa claver surigao del norte ang shop namo.
Idol, good day....very clear ang instructions. Keep up the good job.....naa ra ko question idol, unsaon pag.trace kung ang switch kay naay para fog lights? Unsoan pag.trace sa pins para sa foglights?
Ang pag trace sa connection pra sa fog light mao ra ang sa park light na paagi. E On ang switch then pangitaa ang my continuity na duha ka wire.Then tan awa ang Fog light tutorial video sa kani na yt channel.
Ask ko lang po boss, kung saan po set ng multi tester po. Thank you po boss!!!
E set mo sa multitester sa resistance x1 pra mka hanap ka sa continuity during pg testing sa mga switch.
Very informative tutorial,,sir,i would like to clarify the power supply line to be used on those switch,,is it really NEGATIVE POWER SOURCE?,,,thanks in advance for response❤
Yes.,,negative supply sir.
@@fjace thank you sir for response,,one more things sir,,what standard size of wire to be used on ignition system and light system?,,for D.I.Y purposes only sir,,i have an otj for rewiring,,,thank you very much and god blessed you sir❤
SAE Wire gauge #18 & 16 for lighting wiring and for ignition system # 16 and # 10 & 12 for ignition switch.
@@fjace thank you very very much sir,,❤
Hi , my left turn signal light does not reset (stop blinking). After I complete my turn). Do you have any ideas about what the defect is and how I can fix it please? Thx
There is a mechanism inside the combination switch that will automatically reset.Open it and fix.Sooon I will make a video related with that problem you encountered my friend.
sir ung positive source saan connected sa relay ba.
Ok.Sa 85 terminal sa relay.
dmonaman sinabi saan i connect ang postive
Ulitin mo ang video pra mas maintindihan ang positive connection.
Boss makapalit ba ta anang handle combination switch? Kanang naa sa manobila dool? Para sa 4d31 canter. Mayntag matubag salamat. New subscriber ko nimo boss
Mkapalit man ka ana sir.E try una sa mga scrapan ug sakyanan pra barato ra or surplus sa autoparts.
@@fjace naa nay specific para sa 4d31 sir or okay ra lain model nga sakyanan?
The best f naa ang daan sir mao e sample pra dali ra e taud.f wla ok ra bisan lain na combi switch importante ma fit sa steering column housing then mg add ka ug bracket f needed.
Negative ba switching ana sa high and low sir ?
Yes negative switching ang high & low beam ani.
Sir unsay problema sa akong crosswind, ig on sa headlight kay mo apil ang wiper, nya kung e turn right kay mo blink ug apil ang headlight, na unsa kaha ni sir?
May problema cguro na imung ilawum sa combination switch sir.basin ma tandug ang mga mechanism inside f e switch na nimo.E try ug open sir pra ma check ug ma cleaning sad ang mga contact plates.
Panu kung naka on Ang headlight makakapag passing pa kaya
Oo mka gamit pa ghapon sa pass.
Sir pa tulong,pag park light lang ako,sabay din ung high beam naka on sa Xpander combination switch.pero pag turn on light ok na naman low beam.kaso hindi ma matay ung hi beam,ano po kaya problema don?
E try mo e open ang combi switch baka my problema sa mechanism inside.Soon mg apload ako video related sa combination switch servicing pra mas lalong maintindihan ng mga viewers kung ano ang nasa loob ng switch.
Ah,sige marami salamat po.
Boss negative signal poba Yan sa relay pag galing sa switch
Sometimes positive trigger depende sa unit.
Boss paano malaman na 24v ang combination switch?
Sir paki check sa parts details & specification of unit sa combination switch.
They vídeo it's no clear.....
Magtagalog ka na lng
Sir unsay problema sa akong crosswind, ig on sa headlight kay mo apil ang wiper, nya kung e turn right kay mo blink ug apil ang headlight, na unsa kaha ni sir?