They don't debur the common rail it's fully of swarf from the drillings. Took the end plugs out of mine and debured/cleaned out the whole rail and added a bosch filter inline. I ran it full wack for sometime before I put an injector anywhere near it. Done loads of tests and still going. It actually has a bosch pump!
I want this tool! I do a lot of fuel injector jobs and this would be one hell of a diag tool. Let's be honest not very flat rate friendly but COOL AS HELL!!
Use mineral spirits in the machine to flow test. You can get it at Walmart or Home Depot Amin the paint section. Also I use a purple power 50/50 mix to ultrasonic clean them
Thanks! And no problem. Mineral spirits is exactly what I was thinking about and brain farted big time. Next time I’m doing that for sure! Yeah I saw the foam and was like uhhhhh 😮 😂
hello what will be you review on this machine I am thinking of buying one so I have been looking around for reviews on this machine thank you for your time.
My wife and I both have DI instead of Port injection. I want the ability to clean our injectors at home instead of paying someone else, and have seen this machine quite often in shops. Is this machine adequate and reliable? Any problems or hiccups with it? Thanks!
@user-bq4xh5fy5b Thank you very much. How has this machine held up for you? It seems to be in every shop, and alot of the automotive youtubers have them.
@@RichPrivilegedWhiteMale It seems well made. Build and holds pressure well. The ultra sonic looked a bit weak but did the job well. Definitely go for the 160 or dearer.
eBay CT150 professional seller can help you solve the problem（ www.ebay.com/itm/Autool-CT150-Ultrasonic-Fuel-System-Petrol-Injector-Cleaner-Tester-US-STOCK-/113924712483?nav=SEARCH）
Alll the fun of EFI. Hope this helps w the pacer pacing itself. Thanks for bringing us along!
Hells yeah man! Almost got it going again letting the tank dry out 👍🤘
They don't debur the common rail it's fully of swarf from the drillings. Took the end plugs out of mine and debured/cleaned out the whole rail and added a bosch filter inline. I ran it full wack for sometime before I put an injector anywhere near it. Done loads of tests and still going. It actually has a bosch pump!
I want this tool! I do a lot of fuel injector jobs and this would be one hell of a diag tool. Let's be honest not very flat rate friendly but COOL AS HELL!!
Thank man, im cleaning my Lamborghini aventador injectors and that helped a ton :)
It looks like when they are all on, the far right rail loses a bit of pressure
Its now been 3 years. How has the machine held up ?
Use mineral spirits in the machine to flow test. You can get it at Walmart or Home Depot Amin the paint section. Also I use a purple power 50/50 mix to ultrasonic clean them
Hell yeah! That’s rad I may try the 50:50 mix
@@DickHamm Purple Power has led to corrosion on certain alloys. Simple Green Extreme (aircraft) is the ticket...and I've tried them all. Good luck.
Thanks! 👌
I definitely need to invest in one of those
Haha heck yes! Use my link if you do 👀🤷♂️
I'm looking at one of these, thanks for the vid. Try mineral spirits. It's cheaper than sea foam and should clean ur injectors at the same time.
Plus it shouldn't foam
Thanks! And no problem. Mineral spirits is exactly what I was thinking about and brain farted big time. Next time I’m doing that for sure! Yeah I saw the foam and was like uhhhhh 😮 😂
Can this model handle with Diesel Injectors? Peugeot 1.6 HDI? Or is it only for Benzin?
Will this machine work on low impedance 160lbs injectors?
hello what will be you review on this machine I am thinking of buying one so I have been looking around for reviews on this machine thank you for your time.
cool man did not think that equipment was so widely availble
Yeah it’s really cool to have it available honestly! I got a lot of funk out of them!
I was wondering if u have use the ultrasonic cleaner on the top of it if so what are your thoughts does it do the job pretty good?
Yes I did! I think due to the response on the video I would like to make another as well going into more detail
Can you send me a link to buy the testing fluid please,,
I am not sure what testing fluid is proper to use, I just used seafoam which foamed up pretty hard lol
Damn it now I’m on amazon looking to buy one lol
Lol I put an amazon link in the description just for you!
Dick Hamm , I know you love me lol
Hahah but of course! I was like uhh I should put that up good point 🤷♂️
What fluid to use for cleaning injectors..?
I’ve been using seafoam for the sonic, and mineral spirits in the tank 🤘
You're not supposed to use flammable cleaners, they can cause an explosion. They make cleaners specifically for these types of machines. Be careful.
ah good info! thanks for that tip
Only sea foam used in this video?
I think so yes!
Mineral spirits to flow and seafoam to clean isn’t bad tho seemed to work pretty well for a cheap easy go
it is possible to use it on a motorcycle injector?
Yes! The shop I borrowed from is a motorcycle shop
My wife and I both have DI instead of Port injection. I want the ability to clean our injectors at home instead of paying someone else, and have seen this machine quite often in shops. Is this machine adequate and reliable? Any problems or hiccups with it? Thanks!
The CT150 doesn't do DI injectors. The CT160 does. I found this out the hard/expensive way.
@user-bq4xh5fy5b Thank you very much. How has this machine held up for you? It seems to be in every shop, and alot of the automotive youtubers have them.
@@RichPrivilegedWhiteMale It seems well made. Build and holds pressure well. The ultra sonic looked a bit weak but did the job well. Definitely go for the 160 or dearer.
Hi what type of adaptor to use to fit an 850cc injector that came out from the sr20 motor.I dont know how to fit them on my machine?
I think these machines doesn't have enough pump for high flow injectors!
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
You’re welcome!
Could you pls help make some review videos ?
Sure, email me richardhamm225@gmail.com
Does this work with fsi engine type injectors?
I’m not sure on that answer, sorry about that
eBay CT150 professional seller can help you solve the problem（
www.ebay.com/itm/Autool-CT150-Ultrasonic-Fuel-System-Petrol-Injector-Cleaner-Tester-US-STOCK-/113924712483?nav=SEARCH）
Knobs are on upside down.
So sick I think I might have to pick one up..
It’s really nice I want one too lol
This is only for petrol. For diesel there isnt a machine?
The pressures are vastly different I’m not sure what diesel folks do
Enjoy watching here.. New friend.
💪💪👊
Those are probably fake injectors. Big issue
I bough one of these off amazon and it packed in after second vehicle, pile of cheap rubbish