AKK KC02 Sony Super HAD II CCD and 600mW vTX FPV KIT Review - part 1

[@Mosfet510]

Your video came in very handy, thanks!

[@TechTronic9000]

Glad it helped!

[@AuroraColoradoUSA]

Great information. Thanks.
I wonder why the transmitter uses high power LED instead of low power LCD for display. LCD is more visible in daylight too. Probably less circuitry, costs less. Hopefully it turns off.

[@TechTronic9000]

I'm glad you liked my review, as for the LEDs I see that all transmitters use the same, there are also some vTX modules with dip-switch and no LED.

[@zachattack4982]

Will this work with the rotg02 phone reciever?

[@TechTronic9000]

Yes

[@camelion.4791]

Can I connect a battery with 2300mah and 8V to it? Good video.

[@TechTronic9000]

8V battery? Depends on the model of your AKK, some run on 5V others on 2-3 or even 4S. You need to check the exact power requirements.

[@camelion.4791]

@@TechTronic9000 4S battery. Every one had 2V

[@camelion.4791]

@@TechTronic9000 But its runs. I only afreat about the mah. That the heat destroys it.

[@Tr1stan_1]

What volt battery were u using? What would work the best

[@TechTronic9000]

You can check all specs here amzn.to/3IMYqf7

[@donaldjtoneyjr69]

Does this also have a built in audio ? Thanks

[@TechTronic9000]

It has a mic on the TX board.

[@Revelation1177]

I got this setup connected to a 2s lipo an all I get is static it's on the rite channel an band

[@TechTronic9000]

Try a search on the receiver, could be that the band / channel doesn't correspond.

[@juanjo_fpv5097]

How do I use different power on it? Or does it come on the max power?

[@TechTronic9000]

You can do that quickly from the micro switch, it's a combination such as press and hold or something similar.