Hey love your video, your super talented and skilled. your video would be even better if you could explain how you diagnose the issue, your earlier video shows that. I think you should do the same for the newer video. Your channel is great for people who want to gain knowledge in this trade. Just an advice, keep posting :)
if you are fixing a dead iphone 6, just hold the top volume, home button, and power button at the same time. IF that doesnt work, connect your iphone to the computer
This phone was for training video only, no? The phone has a short on VCC_MAIN because C5202_RF is bad--look at burn marks. It didn't need PMIC change. So many phones are ruined by people who follow and just think "no power = I should change PMIC" Still love your skills, thanks for sharing :)
+iPad Rehab Probably checked the voltage out Jessa direct from pmic is bad for cpu gpu etc and the input voltage is fine indicating faulty pmic I did spot water damage at pmu desense cap C5203_RF I doubt he would change the pmic without good reason unless he's just showing off lol.
I don''t think he is a showing off type. Check out his other videos. The main thing is he doesn't even use high end tools like Jessa. I am not trying to put Jessa But this guy is really inspiring.
That was sarcasm he's highly skilled. i personally use thermo couples for everything take no risks, this guy has a feel for it you can see him prodding components to make sure the board has reached temp efficient technique it's like art and his timing is perfect. .
ALL HIS VIDEOS ARE CORRECT,JUST BECAUSE YOU CANNOT DO SHIT DOESN'T MEAN SOME OTHERS CANT,I HAVE DONE THIS SEVERAL TIMES,ALL YOU NEED IS TO PRACTICE IT ON DEAD MOTHERBOARDS TILL YOU CAN DO IT RIGHT THEN DO IT FOR A PHONE YOU WANT TO REPAIR.DO SPORTS AND YOU WILL HAVE A STEADY HAND
+N Atwell The fact that he removed the pmic without lifting pads (the one is NC) and resolder new one and he has spool of pmic chip means hes a pro and this solution absolutely will in most cases fix water damaged iphones. It turned on that means pmic working.
Can you please help me... after removing ic chip or any other, you have to clean that small (round circle) solder pins on motherboard...How to clean them without damaging the motherboard? I tried it once but i pulled the copper from the motherboard, basicly ruined it. Do i have to preheat the motherboard and then try with soldering gun and solder wick? What i did was putting soldering paste....using soldering gun over wick and trying to remove the extra solder from motherboard...the effect was clean motherboard but also pulling some small copper pins and in that way destroying the motherboard. Thank you in advacne for help...
hello my iPhone 6 in touch ic problem you well repair it (me deep fix she apna phone repair karwana chahta hown ) please reply me fast and tell me what's the charges you won't and were is your repairing lab OK thanx by
Sir I have a iPhone 6 which is dead I have shown that phone to my other repairers but each one said that it can't be repaired. Would you please help me with it.
firstly, for the original PM IC (never reball before) if you hot till the solder can come out like that for sure the CPU will over hit. second, the new PM IC if you are not reball before put in it is very high chance to damage CPU. and at last, before check with other LCD it was arabic language and after that it became english.
First I thank you for watching our video and you post your questions or doubts in brief.changing the language is not a big deal. I wanna make you clear that,if you didn't do something it doesn't mean someone can't do that work . Do you think all our videos are not genuine?if you can check them all.
accept the opinion to be good for later better than you deny it. I dont know, event dont care where you are but one thing for sure that i did iphone 6 more than times you eat per day. Br!
Each time I see you perform a smartphone IC swap, I wonder how do you know that it's correctly positioned. Contact pads are minuscule and precision is critical.
i thinks this a fake video repair, two reason first in minute 1:29 i see you lose 1 pin on board , second in minute 3:01 i see a two capacitor in short , bonus you stop video when change LCD .. any ways good Video .
Fair point, however, the shorted capacitors could be in line which would be fine and they could easily be cleaned up via a quick solder iron touch :P. And not all of the pins needs to be intact on the bga or the PCB, some pins have no continuity or usage. Cheers!
PS: Often times, if a pin breaks or cracks off the PCB easily, then there is a chance it will be a (useless) or (nothing) pin, as it wasn't really "gripping" anything but the board itself :) .
I have an iPhone 6 as the battery discharges very fast , because I changed the battery and connector will be the problem , or know tell me which defective IC.
I replaced the screen in my iPhone 6. The CPU and Home button got really hot so I disconnected the batter. The phone will not turn on again and is not detected my iTunes. Do you think the PM ic is the culprit?
Thanks! few more questions. What temp are you preheating at? Also, what temp for hot air? This is all lead free right? What is your success rate with this? I just want to get an idea of the melting. Points. I prefer to use a k-type thermocouple with digital thermometer to assist in regulating the heat. Thats how I do it with my bag rework station for bigger bgas
DEEP FIX Hi love your videos excellent stuff what you do. I'm new to all the rework. I my self have a hot air station. And I was wondering what temperature you use to remove and to install the chip and at what air flow rate would you recommend may I ask .Thanks in advance
hello. wow you are a awesome expert for iphone fix anyway I have a question for you. this video running time "1:11" after removing PMIC, you hold brown strip? what name exactly? ^^ and you use liquid thing is that... flux? right? other one?
I have an iPhone 6 - it doesnt appear on any computer using any apple lightning cable - it only charge once connected. I am sure it's not the cable nor the pc because i tried another iPhone 6 and it works.. Could it be my data terminal of my iPhone 6 is busted? (not the charging terminal) pls advise
hello how are you please am asking about charging problem on iphone 6 I changed u2 ic ,USB control ic and change any part on charging area but dos not working (The device charging when it shut don
Please sir, could you help me diagnose my hardware problem? I replaced the battery and after one week I forgot to recharge it because it was stuck in 100% most of the time and it suddently turned off. After that it won't go beyond the apple logo boot, it vanishes and reboot. I tried recover it on iTunes and after sending the firmware it reboots and the apple logo appears with the progress bar but it turns off (slowly vanishing) and reboot itself to the iTunes connect logo. I will replace the IC but there is the tristar (U2) and the power management (U7) I don't know which of them i should replace.
Hello Mr Ashfaq, I have an iphone 6 that suddenly turned black and is not charging or recognized by the computer. Is there a way you can fix it for me without loosing the Data? The data is very important to me. I'm willing to pay for the job.
hey my iphone was water damage and i could not restore it now. I brought it to repair shop and they said, might a flash storage problem, so how can I fix this?
Hi DEEP FIX. i have an iphone 6 which died after getting hot. now it doesnt turn on and when i attach battery and hit power button, the cpu gets hot until i remove the battery. which ic should i replace. the pm ic or u2?? please let me know, i need your help
How do you find out if the PMIC and screen need replacing if water damaged, I have two iPhone 6 and Samsung s6, both water damage both with not turn on?
Video is fake..check in first board lcd was not working language was Arabic...but when he changed lcd language was english..he didn't change only lcd..but also he changed board
man . i change my charge port and batterey but still die Because i used a fake charge and it blow when i charge the phone can help me to know what the problem ? salam
Hello sir, my iphone 6 is dead, changing lcd and battery is not working, but when i connected it on itunes it recognize my phone but nothing shows on the screen just black, what is the problem? Pm ic or u2 ic?
Hello I am from the Dominican Republic and I have the following problem with my iphone and it is that I only stick a minimum drop of charge if it is that you are dead after that ignites it does not load never thanks I will wait for a help of its part
This is another board because before testing with another lcd the swipe to unlock shows in arabic but after testing with another lcd it shows in english how this can be possible
Hello dear, How are you? I have an issue with my iphone 6 plus, is runing good when I charge the baterry but out the motherboard with a tester of batteries, but when I connect the usb cable to charge the phone normally is not charging and in the screen of the iphone I couldn't see any simbole of charging phone, I test the flex usb charging and it's working good, because it arrives 5.1 V to the flex cable but when i conect the flex cable with the motherboard of my iphone 6plus the V that arrives to the battery is 0.24v wich chip has the issue?, I oppened the motherboard and I see all the chips but i couldn't recognize the issue chip of all them, so can you help me please?
Hello Ashfaq, I'm very impressed with your knowledge and soldering skills. How did you acquire this knowledge and what type of training would you recommend? I just recently opened a Computer and Cell phone repair shop in the USA. Thanks, Manny
my phone 6plus 64gb problematic on the motherboard. Can it be replaced with motherboard that I will buy in lazada. Will it later run smoothly just by replacing the motherboard only?
If you look carefully when the capacitors sticking together and he is trying to keep them apart. The capacitor sticks to the other side and solder was left between those two capacitors. Now mayby they where connected anyhow in the traces but if not, it would be sreious short cut.
Fantastic work, I was just wondering if you can perhaps shot a video on how you can remove iCloud from iPhone 6, just like the iPhone 5 tutorial. Thanks much big fan.
Hi! great video, and de great channel to subscribe! It would be great if you tell could tell me what is that sponge like adhesive that is place over the A8 chip, and what's beneath it. Also, that QR code, whats that all about??
where can I get replacement ic chips? and what does th letters pm stand for? and do you ever reball any ic's? and if so where can I get deal with a company who will have these chips as soon as they become available. .Any information you can give me would be helpful at this time. Thank You very much .
Hi, please help me, I charged my phone with chines cord in a 220 V, then when I tried to open the phone it was all black, NO sign for anything, my phone does not work any more, please help me.
Hi i usually repair iphone screens etc never went to that that extent working with the circuit board but im interested to know what your actually replacing and what materials you have been using, Thank you ?
hi thanks for this video is very intersting, i want to ask u ,this part that have changed that caused error 50 if we want to restor the iphone , because i bought an used iphone 5c in ios 7.0 and i obseved that all time in search to network carrierr so can u help me if u have resolotion for this problem thanks friend
My iphone 6 is dead by falling on floar... i send it to service in my town thay sad that motherboard is alive but phone dont work so thay need to find what is dead on motherboard so can somebody tell me is it expensive to fix that
hey, two questions : 1. what is the temperature of the heat gun ? 2. after the soldering you are using DVM to measure impedance or short ? and what are the points on the board to do it, beside the gnd of course?
i have a problem with an iphone 6s, changing the display i saw a little bit of smoke near a display connector and now i have no image and iphone doesn't turn on only 2 vibrations after connecting the charger
Hola, Soy Jose de Bs As Argentina, me podrán mencionar un e-mail en donde les comente mi caso, necesito poder reparar la PLaca de mi Iphone 6 ! Muchas Gracias y espero su respuesta
in the last when touch no work the language is Arabic , why it come English when the touch work again. you are lair
Look at the battery percentage
Hey love your video, your super talented and skilled.
your video would be even better if you could explain how you diagnose the issue, your earlier video shows that. I think you should do the same for the newer video. Your channel is great for people who want to gain knowledge in this trade.
Just an advice, keep posting :)
Nice demo like always. So, the VBAT was in short? How you know in avance the issue is the PM IC and not the charging IC or some other one?
Temperature (in C or F) and air flow setting, please!
if you are fixing a dead iphone 6, just hold the top volume, home button, and power button at the same time. IF that doesnt work, connect your iphone to the computer
amazing ,thanks for this, but how did you find the problem is the PM ?
Azubyk Samuel who asked ?
This phone was for training video only, no? The phone has a short on VCC_MAIN because C5202_RF is bad--look at burn marks. It didn't need PMIC change. So many phones are ruined by people who follow and just think "no power = I should change PMIC" Still love your skills, thanks for sharing :)
+iPad Rehab Probably checked the voltage out Jessa direct from pmic is bad for cpu gpu etc and the input voltage is fine indicating faulty pmic I did spot water damage at pmu desense cap C5203_RF I doubt he would change the pmic without good reason unless he's just showing off lol.
I don''t think he is a showing off type. Check out his other videos. The main thing is he doesn't even use high end tools like Jessa. I am not trying to put Jessa But this guy is really inspiring.
That was sarcasm he's highly skilled. i personally use thermo couples for everything take no risks, this guy has a feel for it you can see him prodding components to make sure the board has reached temp efficient technique it's like art and his timing is perfect.
.
Yea very true.
Hi Jessa !
I was actually looking for that Chinese dudes video to see his diode measurement map he was using. Wrong video.
ALL HIS VIDEOS ARE CORRECT,JUST BECAUSE YOU CANNOT DO SHIT DOESN'T MEAN SOME OTHERS CANT,I HAVE DONE THIS SEVERAL TIMES,ALL YOU NEED IS TO PRACTICE IT ON DEAD MOTHERBOARDS TILL YOU CAN DO IT RIGHT THEN DO IT FOR A PHONE YOU WANT TO REPAIR.DO SPORTS AND YOU WILL HAVE A STEADY HAND
The keyboard was in Arabic and then I'll come to change the English
Repaired device had Arabic font. After digitizer failure, and "Changed LCD" the device showed English font.
Nice try.
it's not easy to trick technician... saw that too
+N Atwell
I think it's another iphone.
+N Atwell The fact that he removed the pmic without lifting pads (the one is NC) and resolder new one and he has spool of pmic chip means hes a pro and this solution absolutely will in most cases fix water damaged iphones. It turned on that means pmic working.
You do realise the first activation screen scrolls between various languages dont you?............
the one is not nc, but 1v0pp
Can you please help me... after removing ic chip or any other, you have
to clean that small (round circle) solder pins on motherboard...How to
clean them without damaging the motherboard? I tried it once but i
pulled the copper from the motherboard, basicly ruined it. Do i have to
preheat the motherboard and then try with soldering gun and solder
wick? What i did was putting soldering paste....using soldering gun over
wick and trying to remove the extra solder from motherboard...the
effect was clean motherboard but also pulling some small copper pins and in that way destroying the motherboard. Thank you in advacne for help...
hello my iPhone 6 in touch ic problem you well repair it (me deep fix she apna phone repair karwana chahta hown ) please reply me fast and tell me what's the charges you won't and were is your repairing lab OK thanx by
Sir I have a iPhone 6 which is dead I have shown that phone to my other repairers but each one said that it can't be repaired. Would you please help me with it.
firstly, for the original PM IC (never reball before) if you hot till the solder can come out like that for sure the CPU will over hit. second, the new PM IC if you are not reball before put in it is very high chance to damage CPU. and at last, before check with other LCD it was arabic language and after that it became english.
First I thank you for watching our video and you post your questions or doubts in brief.changing the language is not a big deal.
I wanna make you clear that,if you didn't do something it doesn't mean someone can't do that work .
Do you think all our videos are not genuine?if you can check them all.
accept the opinion to be good for later better than you deny it. I dont know, event dont care where you are but one thing for sure that i did iphone 6 more than times you eat per day. Br!
+DEEP FIX you can have genuine videos but this is not one of those because you burn the digitizer chip control
+Mr Chu I think you should make a real video :)!
+Julio Osilia fully agree this is BULLSHIT.....they dont even use heat seal to shield other parts, just highly unprofessional
Each time I see you perform a smartphone IC swap, I wonder how do you know that it's correctly positioned. Contact pads are minuscule and precision is critical.
i thinks this a fake video repair, two reason first in minute 1:29 i see you lose 1 pin on board , second in minute 3:01 i see a two capacitor in short , bonus you stop video when change LCD .. any ways good Video .
Fair point, however, the shorted capacitors could be in line which would be fine and they could easily be cleaned up via a quick solder iron touch :P. And not all of the pins needs to be intact on the bga or the PCB, some pins have no continuity or usage. Cheers!
PS: Often times, if a pin breaks or cracks off the PCB easily, then there is a chance it will be a (useless) or (nothing) pin, as it wasn't really "gripping" anything but the board itself :) .
Patricio Reyes thanks
this pin m10 is not nc
the pin is not broken.if you look close enough you can see it's not well cleaned.probably it's oxidised
I have an iPhone 6 as the battery discharges very fast , because I changed the battery and connector will be the problem , or know tell me which defective IC.
I replaced the screen in my iPhone 6. The CPU and Home button got really hot so I disconnected the batter. The phone will not turn on again and is not detected my iTunes. Do you think the PM ic is the culprit?
Temperature (in C or F) and air flow setting, please!
For the love of God. Please, tell me where I am able to purchase those PMIC's.
Thanks! few more questions. What temp are you preheating at? Also, what temp for hot air? This is all lead free right? What is your success rate with this? I just want to get an idea of the melting. Points. I prefer to use a k-type thermocouple with digital thermometer to assist in regulating the heat. Thats how I do it with my bag rework station for bigger bgas
You can purchase it on online.
DEEP FIX Hi love your videos excellent stuff what you do. I'm new to all the rework. I my self have a hot air station. And I was wondering what temperature you use to remove and to install the chip and at what air flow rate would you recommend may I ask .Thanks in advance
安德鲁+摩尔 这个要看使用的拆焊台，如果是直风的拆焊台，拆IC也要看IC的大小，iPhone6的电源IC，拆解温度330度，风速4档，一定要均匀加热！
hello. wow you are a awesome expert for iphone fix
anyway I have a question for you. this video running time "1:11"
after removing PMIC, you hold brown strip?
what name exactly? ^^
and you use liquid thing is that... flux? right? other one?
You can use Kingboo flux.
Also that's called solder wick
I have an iPhone 6 - it doesnt appear on any computer using any apple lightning cable - it only charge once connected. I am sure it's not the cable nor the pc because i tried another iPhone 6 and it works.. Could it be my data terminal of my iPhone 6 is busted? (not the charging terminal) pls advise
hello
how are you please am asking about charging problem on iphone 6 I changed u2 ic ,USB control ic and change any part on charging area but dos not working (The device charging when it shut don
Please sir, could you help me diagnose my hardware problem? I replaced the battery and after one week I forgot to recharge it because it was stuck in 100% most of the time and it suddently turned off. After that it won't go beyond the apple logo boot, it vanishes and reboot. I tried recover it on iTunes and after sending the firmware it reboots and the apple logo appears with the progress bar but it turns off (slowly vanishing) and reboot itself to the iTunes connect logo. I will replace the IC but there is the tristar (U2) and the power management (U7) I don't know which of them i should replace.
Hello Mr Ashfaq,
I have an iphone 6 that suddenly turned black and is not charging or recognized by the computer. Is there a way you can fix it for me without loosing the Data? The data is very important to me. I'm willing to pay for the job.
How did you recognize that PM IC must be changed ?
hey my iphone was water damage and i could not restore it now. I brought it to repair shop and they said, might a flash storage problem, so how can I fix this?
Hi DEEP FIX. i have an iphone 6 which died after getting hot. now it doesnt turn on and when i attach battery and hit power button, the cpu gets hot until i remove the battery. which ic should i replace. the pm ic or u2?? please let me know, i need your help
How do you find out if the PMIC and screen need replacing if water damaged, I have two iPhone 6 and Samsung s6, both water damage both with not turn on?
Video is fake..check in first board lcd was not working language was Arabic...but when he changed lcd language was english..he didn't change only lcd..but also he changed board
is there a fix for the replacement home button replacement? if you replace the home button(touch id) the iphone becomes a brick when you try to update
Hello, I have an iPhone 6 that its CPU gets very hot when plugging to power. Does this Power Management IC fixes the problem or no ? Help please
man . i change my charge port and batterey
but still die
Because i used a fake charge and it blow when i charge the phone
can help me to know what the problem ? salam
Hello sir, my iphone 6 is dead, changing lcd and battery is not working, but when i connected it on itunes it recognize my phone but nothing shows on the screen just black, what is the problem? Pm ic or u2 ic?
I pray for anyone who tell me the name of the music.
Hello I am from the Dominican Republic and I have the following problem with my iphone and it is that I only stick a minimum drop of charge if it is that you are dead after that ignites it does not load never thanks I will wait for a help of its part
Hi I have an iphone 6, the device no charger and no power . Amper consumption is 0.006 . Can you give me an idea of what is the cause?
this is crazy... can you even buy that ic? and you gonna align it 100% perfect to get contact on all the solder pads. wtf
Nice one... we have a 5s here ,suddenly went mad. only logo comes on sometimes red lcd,then goes off and then on again etc ... :/ any advice?
Its fake first time on iphone language was in arabic nd batttery 22% change lcd font change into english nd battery 6%
I have a question, can I get my memory back even if the phone won't turn on anymore or if it doesn't work at all?
Hi, does anyone know where to buy power ic chip for Asus Zenfone 2 (ZE551ML)? Thanks
ebay
This is another board because before testing with another lcd the swipe to unlock shows in arabic but after testing with another lcd it shows in english how this can be possible
مرحبا من اين احصل على ic اريد ان اشتري مجموعة ،، والغراء الاصفر هذا من وين
Sorry for my english but how it is you must change pm ic and not the component u2, do you have a tester
hello sir namaskar me gk sir sony and samsung mobile hai jinme battery cable se judti us mobile ko dc machine se on kaise karte hai {bina battery ke }
Hi bro my iphone6 also have problem with icpower can you fix it fpr plz i can pay ?
ohhh ashfaq is that you? well done.
hy i am husnain from Pakistan my i pohone 5s is dead in charging case
help my tell me solution plz
Hello dear, How are you? I have an issue with my iphone 6 plus, is runing good when I charge the baterry but out the motherboard with a tester of batteries, but when I connect the usb cable to charge the phone normally is not charging and in the screen of the iphone I couldn't see any simbole of charging phone, I test the flex usb charging and it's working good, because it arrives 5.1 V to the flex cable but when i conect the flex cable with the motherboard of my iphone 6plus the V that arrives to the battery is 0.24v wich chip has the issue?, I oppened the motherboard and I see all the chips but i couldn't recognize the issue chip of all them, so can you help me please?
Sallam brother where do you get parts from Alibaba?Are the original or copy?
my iPhone 6 as motherboard problem ever one said no use where should I buy the motherboard plz help me
hello would you be abule to fix our iphone 6 for us its completly dead and a cost please thanks
Is there a chance my ic is bad due to water damage. It's been cleaned. It got hot before dying
كيف عرفت مشكلته ؟؟؟؟؟انو من pm ic ؟؟؟
والجهاز تغير لغته من العربي وبدون وقت للانكليزي وبوقت ؟؟؟؟
لتحديد عطل ايسي معين يجب قياس فولتيات الدخول والخروج اذا كانت فولتيات الدخول موجوده والخروج غير موجوده فده معناه ان الايسي تالف
Hello Ashfaq,
I'm very impressed with your knowledge and soldering skills. How did you acquire this knowledge and what type of training would you recommend? I just recently opened a Computer and Cell phone repair shop in the USA.
Thanks,
Manny
CAN U FIX MY PHONE FOR 10 $..
hi where you get your IC's n chips plzz from Mauritius...
anyway to find iPhone 6 plus logic board gb by reading the chip?
Sorry my iPhone 6 camera is not working so please it might be AC or what
hey u.......Ashfaq?you got some serious good shit man.i like the way you work bro.i need a xperia z2(D6503) motherboard.can you manage it for me?
هل فعلا تصليح الاي سي خطير للايفون 6 حيث ان نسبة النجاح 50%؟
my phone 6plus 64gb problematic on the motherboard. Can it be replaced with motherboard that I will buy in lazada. Will it later run smoothly just by replacing the motherboard only?
video looks fake. FIRST WHEN HE TURN IT ON IT WAS IN ARAB LANGUAGE THEn SWITCH screens and it was english. ENGLISH. Not real
If you look carefully when the capacitors sticking together and he is trying to keep them apart. The capacitor sticks to the other side and solder was left between those two capacitors. Now mayby they where connected anyhow in the traces but if not, it would be sreious short cut.
what is the product used in 0:15 and 1:00 and 2:00 , this is identical products ? is flux ?
hi I did exactly the same thing but it did not work? What is the problem ?
Fantastic work, I was just wondering if you can perhaps shot a video on how you can remove iCloud from iPhone 6, just like the iPhone 5 tutorial. Thanks much big fan.
bhai hmary pass i phone 6plus ha wo apple par still ha agy ni jata plz hmari help kar den
Hi! great video, and de great channel to subscribe!
It would be great if you tell could tell me what is that sponge like adhesive that is place over the A8 chip, and what's beneath it.
Also, that QR code, whats that all about??
where can I get replacement ic chips? and what does th letters pm stand for? and do you ever reball any ic's? and if so
where can I get deal with a company who will have these chips as soon as they become available. .Any information you can give me would be helpful at this time. Thank You very much .
pm stands for power management
Apple/Dialog 338S1251-AZ Power Management IC
Congrats from chile, you are great electronic technician men !! grat job
Hi, please help me, I charged my phone with chines cord in a 220 V, then when I tried to open the phone it was all black, NO sign for anything, my phone does not work any more, please help me.
My iPhone 6 touch I'd not working PLZ ANY Solution
Can u sell me a 64g GSM motherboard, for 200.00
How do you know whether the ic is shorted or one of the surrounding smd caps? What temp did you use for removing the chip? Thanks
hlo bro yr mre pss 5s hai bar bar off ho rha hai sbse pcha sb bolte Ic problm h ksy theek hogaa plzz bta skte ho
Hi Deep, what is the flux/raisin you used to take out/loosen the damaged pm chip? Is it the same flux for soldering and desoldering? Thanks
Hi i usually repair iphone screens etc never went to that that extent working with the circuit board but im interested to know what your actually replacing and what materials you have been using, Thank you ?
hi thanks for this video is very intersting, i want to ask u ,this part that have changed that caused error 50 if we want to restor the iphone , because i bought an used iphone 5c in ios 7.0 and i obseved that all time in search to network carrierr so can u help me if u have resolotion for this problem
thanks friend
Very nice but pls fully explain to which matieal used are you
My iphone 6 is dead by falling on floar... i send it to service in my town thay sad that motherboard is alive but phone dont work so thay need to find what is dead on motherboard so can somebody tell me is it expensive to fix that
tenho um phone 6 que não da liga só esquenta trocando esse chip resolve ?
hey,
two questions :
1. what is the temperature of the heat gun ?
2. after the soldering you are using DVM to measure impedance or short ? and what are the points on the board to do it, beside the gnd of course?
ماشاءالله عليك فنان 👍👌
why it was first in arab language and when you change "another screen" it had switched to english?:F:F:F:F: how?:D:D:D:D:
I have a question, how is name that liquid wich you put on main board, brown..??
Soldering Flux
i have a problem with an iphone 6s, changing the display i saw a little bit of smoke near a display connector and now i have no image and iphone doesn't turn on only 2 vibrations after connecting the charger
maybe you short-circuited the display connector. if the damage is on the motherboard, you'll have to replace the entire board.
0% expensive equipment
100% pure skills
Nice job!! Is there a way to remove iCloud by changing a chip on logic board?
Hola, Soy Jose de Bs As Argentina, me podrán mencionar un e-mail en donde les comente mi caso, necesito poder reparar la PLaca de mi Iphone 6 ! Muchas Gracias y espero su respuesta
One question, what video camera do you use for the video? Thanks.
where is your repairing center i want know can u please give your adress
hahhaha c not the same card you put the first time you changed another to that place
bro mere phone ka motherboard kharab h please help me. where r u from,,??
wonderful except one thing the annoying music I hate it hahahahah
Hi
I have iphone dead need help
Where are you ?
How to contact ?
Hi, I saw your video from Chile and I would like to ask you if you know where I can buy the icepower for the iphone 6 thanks
hi can i send you my phone for repair plz it went dead on me 2 days ago plz and tell me how much it will cost
أين هو متجر لوسمحت وهل ممكن تركب رووم للجلاكسي نوت 1
hey what's the easiest way to kill an iPhone's motherboard?