I’ve been tinkering on bikes for over 50 years. I’m a certified aircraft mechanic. I learn something every time I watch one of your videos. This is one of your best.
I've been wiring stuff for 20 years, from RC vehicles, to industrial robotics. Excuse me while I eat this slice of humble pie and go redo my turn signal wiring with the methods shown in this video. Great video TJ!
all good man, i wasnt born knowing everything! i had to have someone teach me this so trust me, i fucked up before i found my way too! thanks for watching man! and thanks for the comment!
after wiring up a new tail light last month, now I want to go back and re-do it. You pointed out all the ways I was an idiot. Thanks for helping me learn!!! Great Vid!
I’ve reached out to these guys with questions a few times and they always reply quickly ( which I never expect) and In great detail and explain things to me and I’m extremely grateful I will always support these guys not only are their products great their customer service is next level
Great video! I just finished rewiring my 1984 Goldwing, what a nest of wires that was. I ended up replacing the stock connectors with deutsch connectors. I really enjoyed the simplicity of the deutsch connectors. The crimp you did with the non insulated barrel connector reminds me of the crimp done by the iwiss deutsch connector crimper. Well worth the extra money for the peace of mind of solid, weather proof connection.
Wish I'd had this info 30 years ago when I was working on my bikes. Now I'm too spent for riding or working on bikes. Good news is: I listen and learn from guys like you then relay this knowledge to those less experienced and they think I'm really smart 😅 After the accolades I (graciously) let my audience know of channels like yours to further their education. Yeh, I can't do anymore but I can still learn. Thanks be to guys like you. And I do thank you. That old VLX 600 was soooo comfortable... shit I'm getting old... Keep on!
My first bike had an actual blue square conduit box for housing, and the orange twist on caps. Trash can wiring meant for a dumpster fire. Sweet video my dudes! Keep up your great content.
Thanks for the insight tj, but can you also make a video on how to install the fuel guage, speedometer, tachometer, rpm guages, i mean all that stuff of guages
I have a little butane pen torch that I found at Home Depot a few years back. You can swap from open flame to a tiny heat gun nozzle in seconds. It's been fantastic for wiring.
My 97 cb headlight caught on fire like a week ago , the bright light wire came loose and was hitting against the self tapper I had holding in right side of bulb …I had electrical tape , wire nuts and dollar store contacts…the trifecta!
This is a question for everyone. I replaced the turn signals on my VT 1100 C2. I swapped from incandescent to LED and I’m not experiencing any hyper flash, but when I go to cancel the turn signals all four flash at the same time I have a flash relay on the way, I have also heard that it could be a backflow of electricity problem but everyone that I’ve seen on RUclips says that you have to put the diodes between your indicator dash lights and your flash relay well my bike doesn’t have an indicator dash because we chopped the wiring, everything still works, except all four blinkers turn on at once any help at all from anybody that might’ve had this experience would be great. Love you pookies.
Hello TJ…. Can you please tell me the differences ( if there are any ) Between a shadow and a steed? I read somewhere that the name steed is for Asia and shadow is the name for the US and Europe. Otherwise, it’s the same bike … I would appreciate your knowledge Thank you
steed is a shadow. the shadow line encompasses many displacements, the steed is the export version of the VT600 or VLX and is only 400cc instead of 600.
@@TJBRUTALCUSTOMS thank you TJ for your reply. Keep up the good work with the videos….. I have learned many things by watching… Thank you again for your time
I bought a 1988 Honda shadow 600 for 400 bucks the other day trying to get the starter to engage not sure what the issue is. I bought a new siliniod and tried that and it just buzzed and the starter won’t spin I tried jumping the starter with cables and it spins but isn’t making contact with the fly wheel I think. And when opening up the starter I saw no gears where striped and all looked good. If any one has any tips they would be appreciated. And it shouldn’t be the battery I bought a brand new 120 cca battery
Dude that sucks! We are so sorry but we just cannot help diagnose bikes via RUclips! It usually ends up being an exercise in futility and frustration. Plus, you wouldn't want a stranger on the internet diagnosing your bike! One would really need the bike in person to properly diagnose, and we are not a service or repair shop. We recommend you check out our other youtube videos (theres a TON!) and the support page at shoptjbc.com We also offer a tuning e-book, here's the link- shoptjbc.com/blogs/news/performance-tuning-book-lp If you are still not able to figure out the issue, we recommend you take it to a local shop! Wish you the best and do fun shit!
Hey man why doesn't anyone do these cool builds with the 1100s? I picked one up for a fair price and I've been trying to get it set up a little better but everything I see seems to be for 600/750. Any particular reason?
@TJBRUTALCUSTOMS Bro what 😂😂 also can you run your acerus single cable throttle with a front brake your do you have to ditch it? I'd kind of prefer to keep it but have to clean up the controls
Dumb question do you have any suggestions on how to switch rims on a motorcycle for a new person because I have a 2006 honda shadow vlx 600 dlx and It has spoke rims on it and I want to switch them to a different kind so I don't have to deal with tube's and can run tubeless tires
I suggest taking your new rims and tires to a bike garage to have them mounted. I've tried to do everything myself including changing the water pump but I'll never change the tires by hand again. It's an enormous pain in the ass start to finish and I scratched the rims badly. You can take your wheels off the bike to save most of the labor cost as long as you have a safe way to jack it up. The shadow sabre has cool mag rims that run tubeless you could look into too
@skottlee8959 I'm not worried about changing tires I just did that a few months ago I want different rims and don't know the difficulty of getting the right axle hole size so my axle fits I want like a 5 or 6 spoke rim instead of wire spokes so I can go tubeless
I’ve been tinkering on bikes for over 50 years. I’m a certified aircraft mechanic. I learn something every time I watch one of your videos. This is one of your best.
Me too buddy! Airframer myself but this video is a banger.
man thank you so much. i really appreciate that, and thanks for commenting
I've been wiring stuff for 20 years, from RC vehicles, to industrial robotics. Excuse me while I eat this slice of humble pie and go redo my turn signal wiring with the methods shown in this video. Great video TJ!
all good man, i wasnt born knowing everything! i had to have someone teach me this so trust me, i fucked up before i found my way too! thanks for watching man! and thanks for the comment!
after wiring up a new tail light last month, now I want to go back and re-do it. You pointed out all the ways I was an idiot. Thanks for helping me learn!!! Great Vid!
always a good day when we learn something!!
I’ve reached out to these guys with questions a few times and they always reply quickly ( which I never expect) and In great detail and explain things to me and I’m extremely grateful I will always support these guys not only are their products great their customer service is next level
thanks for the love!
Great video! I just finished rewiring my 1984 Goldwing, what a nest of wires that was. I ended up replacing the stock connectors with deutsch connectors. I really enjoyed the simplicity of the deutsch connectors. The crimp you did with the non insulated barrel connector reminds me of the crimp done by the iwiss deutsch connector crimper. Well worth the extra money for the peace of mind of solid, weather proof connection.
Wish I'd had this info 30 years ago when I was working on my bikes. Now I'm too spent for riding or working on bikes. Good news is: I listen and learn from guys like you then relay this knowledge to those less experienced and they think I'm really smart 😅 After the accolades I (graciously) let my audience know of channels like yours to further their education.
Yeh, I can't do anymore but I can still learn. Thanks be to guys like you. And I do thank you.
That old VLX 600 was soooo comfortable... shit I'm getting old... Keep on!
thanks for sharing dude! have an awesome day!
My first bike had an actual blue square conduit box for housing, and the orange twist on caps. Trash can wiring meant for a dumpster fire. Sweet video my dudes! Keep up your great content.
Thanks!!
Thanks for the insight tj, but can you also make a video on how to install the fuel guage, speedometer, tachometer, rpm guages, i mean all that stuff of guages
That cloth tape stuff has been used on the wiring harnesses off cars, trucks and some motorcycles for at least 20 years now.
yes thats correct. did i say it was new? im jhust bringing awareness to a lot of shit that MANY people arent aware of. 🍻
I have a little butane pen torch that I found at Home Depot a few years back. You can swap from open flame to a tiny heat gun nozzle in seconds. It's been fantastic for wiring.
Excellent information. Going to pick up some of that black tape stuff
I totally rewired my bike with your diagram and videos 🤘and it runs 😄
Great to hear!
would love to finally get to this ... build my own bobber shadow .. but in our country is super expensive even old ones TT
Good shit! Thanks
Great info
Thanks for the video
Our pleasure!
My 97 cb headlight caught on fire like a week ago , the bright light wire came loose and was hitting against the self tapper I had holding in right side of bulb …I had electrical tape , wire nuts and dollar store contacts…the trifecta!
Usually you use fuses that would "break" before anything occurs.
The seam on a crimp connector is supposed to go opposite the "knuckle". If you crimp into it, it splits open.
👍
They've also got what I know as a "Zip tie gun" it tightens and cuts them flush. Used one on big trucks/equipment for 5-6 years now
👍
This is a question for everyone. I replaced the turn signals on my VT 1100 C2. I swapped from incandescent to LED and I’m not experiencing any hyper flash, but when I go to cancel the turn signals all four flash at the same time I have a flash relay on the way, I have also heard that it could be a backflow of electricity problem but everyone that I’ve seen on RUclips says that you have to put the diodes between your indicator dash lights and your flash relay well my bike doesn’t have an indicator dash because we chopped the wiring, everything still works, except all four blinkers turn on at once any help at all from anybody that might’ve had this experience would be great.
Love you pookies.
Looking for a wiring harness on eBay for my 2006 shadow 600. Will a 750 wiring harness work just the same?
Nice xs650
Thanks 👍
What's up with that xs 650 on the lift?
belongs to one of the guys here in the shop.
Hello TJ….
Can you please tell me the differences ( if there are any ) Between a shadow and a steed?
I read somewhere that the name steed is for Asia and shadow is the name for the US and Europe.
Otherwise, it’s the same bike …
I would appreciate your knowledge
Thank you
steed is a shadow. the shadow line encompasses many displacements, the steed is the export version of the VT600 or VLX and is only 400cc instead of 600.
@@TJBRUTALCUSTOMS thank you TJ for your reply.
Keep up the good work with the videos….. I have learned many things by watching…
Thank you again for your time
I bought a 1988 Honda shadow 600 for 400 bucks the other day trying to get the starter to engage not sure what the issue is. I bought a new siliniod and tried that and it just buzzed and the starter won’t spin I tried jumping the starter with cables and it spins but isn’t making contact with the fly wheel I think. And when opening up the starter I saw no gears where striped and all looked good. If any one has any tips they would be appreciated. And it shouldn’t be the battery I bought a brand new 120 cca battery
Dude that sucks! We are so sorry but we just cannot help diagnose bikes via RUclips! It usually ends up being an exercise in futility and frustration. Plus, you wouldn't want a stranger on the internet diagnosing your bike! One would really need the bike in person to properly diagnose, and we are not a service or repair shop.
We recommend you check out our other youtube videos (theres a TON!) and the support page at shoptjbc.com
We also offer a tuning e-book, here's the link- shoptjbc.com/blogs/news/performance-tuning-book-lp
If you are still not able to figure out the issue, we recommend you take it to a local shop! Wish you the best and do fun shit!
Hey man why doesn't anyone do these cool builds with the 1100s? I picked one up for a fair price and I've been trying to get it set up a little better but everything I see seems to be for 600/750. Any particular reason?
The simulation...
@TJBRUTALCUSTOMS Bro what 😂😂 also can you run your acerus single cable throttle with a front brake your do you have to ditch it? I'd kind of prefer to keep it but have to clean up the controls
@@woodwick4684 depends on your perch
Dumb question do you have any suggestions on how to switch rims on a motorcycle for a new person because I have a 2006 honda shadow vlx 600 dlx and It has spoke rims on it and I want to switch them to a different kind so I don't have to deal with tube's and can run tubeless tires
I suggest taking your new rims and tires to a bike garage to have them mounted. I've tried to do everything myself including changing the water pump but I'll never change the tires by hand again. It's an enormous pain in the ass start to finish and I scratched the rims badly. You can take your wheels off the bike to save most of the labor cost as long as you have a safe way to jack it up.
The shadow sabre has cool mag rims that run tubeless you could look into too
@skottlee8959 I'm not worried about changing tires I just did that a few months ago I want different rims and don't know the difficulty of getting the right axle hole size so my axle fits I want like a 5 or 6 spoke rim instead of wire spokes so I can go tubeless
To be very honest, the only anime i really like was Cowboy Bebop. im more of a terminator, predator, , OG arnold and chuck norris movie guy LOL
If you have any old but good tools you want to get rid off i might want to purchase a few
Not at the moment.
Billly BOB hook that white wire to that red wire that black wire to that green wire ZAAAAAAAAAAAAAAAAAAAAAAAAAP....Billy Bob u ok????
🍻
Because fuck em lol
😂
Crimp well, do not solder!
Shit😂
😅🍻
Hondas, plus shiba inu, I see whats going on here... you probably watch anime also dont you!